Sister Bay MGLE-PR User manual

(2)
1 - Attach part ( H ) , Seat Back Assembly , to part ( I ), Seat Bottom Assembly , as shown in figure 1
see detail 1 and detail 2 using ( 4 ) of joint connector bolts ( A ) , 2 on each side, ( 4 ) washers ( C ),
( 4 ) Lock washers (D ) and ( 4 ) hex nuts ( E ), tighten bolts using an Allen Wrench.
Do not use
any hand drill
on this product
Assembly Instructions
2.75
ALLEN WRENCH
( included )
B
(12)
(8)
( Seat Back Assembly )
(Left Arm Leg)
Assembly
H
(Right Arm Leg)
Assembly
( Seat Bottom)
Assembly
(8)
J
A(8)
I
C
D
E
Figure 1
2.75
You will also need a phillips-head screwdriver
( not included )
1.50
2.0
(2)
F
(8)
G
K
M
L
( Seat Back Assembly )
H
( Seat Bottom)
Assembly
I
A
C
D
E
A
C
D
E
( Detail 2 )
( Detail 1 )
(FRONT & BACK)
BOTTOM BRACE
Base Rocker
You will need a socket head wrench
( not included )
4.00
(4)
B1
Item No: MGLE-PR
Glendale Porch Rocker
Assembly Instructions
Hardware and Parts

Figure 3
4- Attach parts ( L ), Base Rocker to Assembly from
Figure 3 using 4 of lag screws ( B1 ) and ( 4 ) washers
( C ) as shown in detail 9 , tighten screws using an
allen wrench .
Figure 4
Figure 2
2 - 1 Attach part ( J ), Right Arm Leg Assembly , and
part ( K ), Left Arm Leg Assembly to Assembly from
Figure 1 as shown in Figure 2 see detail 3 and detail
4 , using ( 4 ) of joint connector bolts ( A ) , 2 on each
side, ( 4 ) washers ( C ), ( 4 ) Lock washers (D ) and
( 4 ) hex nuts ( E ), tighten bolts using an Allen Wrench .
(Left Arm Leg Assembly)
K
J
( Detail 3 )
( Detail 4 )
A
A
E
E
D
C
D
C
(Right Arm Leg Assembly)
( Detail 5 )
( Detail 6 )
B
2- 2 To secure the arm to the back of the chair,
as shown in detail 5 and detail 6 , using ( 2 )
of lag screws ( B ) , 1 on each side, tighten
screws using an Allen Wrench .
B
3 - 1 Attach parts ( M ), Front and Back Bottom Brace
to Assembly from Figure 2 using 8 of screws ( G )
as shown in detail 7 , tighten screws using a
phillips-head screwdriver .
3 - 2 To secure the arm from twisting use 2 of screws
( F ) as shown in detail 8 , tighten screws using
a phillips-head screwdriver .
( Detail 7 )
( Detail 8 )
F
GG
M
(FRONT & BACK)
BOTTOM BRACE
( Detail 9 )
L
Base Rocker
B1
C
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST