Sister Bay Hyannis MHYA-DC-R User manual

2.75
F(2)
C(4)
(4)
(4)
D
1.50
A(16)
B(4)
3.50
E
2.50
(8)
G
H
( Seat Back Assembly )
K
(Under
Arm
brace )
L
Arm
J
(Right side
Front & Rear Leg)
(Left side
Front & Rear Leg)
I
M
( Seat Bottom Assembly )
Do not use
any hand drill
on this product
ALLEN WRENCH
( included )
You will also need a phillips-head screwdriver
( not included )
WRENCH
( not included )
Hardware and Parts
Item No: MHYA-DC-R
Hyannis Dining Chair
Assembly Instructions

Right side
Front Leg (FR)
(identification marks
facing up)
J
Under Arm
brace
G
FRONT
Right side
Rear Leg (RR)
(identification
marks
facing up)
J
1a - Attach part ( K ) under arm brace to part ( J ) front right side ( FR ) & Rear right side ( RR ) legs using 4 of screws.
( G ) 2 for each leg. Tighten screws using a phillips-head screwdriver. Be sure to lay the legs and arm brace on
a flat clean surface to assemble. Line up the front right leg ( FR ) with the front of the arm brace ( 2 screws ),
line up the rear right side leg ( RR ) with the back of the arm brace (1 screw). Make sure the identification marks
FR & RR are facing upward. Follow the same instructions for left side legs ( I ), the identification marks FL & RL
should be facing down. Leg and arm brace assembly should form an "A" frame if done correctly.
1b - To Attach part ( J ) , Right leg Assembly to part ( L ) arm, lay arm face down on a flat clean surface, place ( J )
right side leg assembly over the arm using ( 6 ) of screw ( A ) tighten screws using a phillips-head screwdriver.
Follow the same instructions for left side legs ( I ).
FR
RR
FR
RR
K
Right side
Rear Leg (RR)
(identification marks
facing up)
J
Right side
Front Leg (FR)
(identification marks
facing up)
J
Figure 1
Left side
Front Leg (FL)
(identification marks
facing down)
Under Arm
brace
FRONT
K
Left side
Rear Leg (RL)
(identification marks
facing down)
A
Left side
Rear Leg (RR)
(identification marks
facing down)
Under Arm
brace
FRONT
K
Left side
Front Leg (FR)
(identification
marks
facing down)
BACK
Arm
L
I
1b
1a
Under Arm
brace
FRONT
K
BACK
Arm
L
I
I
I
A
G

2b - Attach part ( H ) , Seat Back Assembly , to part (M),
Seat Bottom Assembly , as shown in Figure 1 see
detail 2 using ( 4 ) of screws ( A ) , 2 on each side,
tighten screws using a phillips-head screwdriver .
Figure 3
3,a - Attach part ( J ) , Right side front and rear leg assembly , to assembly from
Figure 2 as shown in Figure 3, Make sure identification marks ( FR ) and ( RR )
are facing inside towards the seat see detail 3, using ( 2 ) of joint connector
bolts ( B ), ( 2 ) washers ( C ), ( 2 ) lock washers ( D ), ( 2 ) hex nuts ( E ), see
detail 4 tighten bolts using an allen wrench and also an adjustable wrench.
Follow the same instructions for left side front and rear leg assembly.
A
( Detail 2 )
( Detail 1 )
2a - Attach part ( H ) , Seat Back Assembly , to part (M), Seat
Bottom Assembly you must align the lower front edge of
Yoke to hide the front edge of groove, see detail 1 .
front edge of groove
Front edge of Yoke
M
( Seat Bottom Assembly )
( Seat Back Assembly )
H
I
(Left Side
Front & Rear leg)
F
( Detail 5 )
( Seat Back
Assembly )
H
F
B
( Detail 4 )
J
B
BF
Figure 2
C
D
E
identification marks
(Right side
Front & Rear leg)
(FR) (RR)
( Detail 3 )
3,b - Attach part ( J ), Right side front and rear leg and part ( J ), right arm leg
assembly, to seat back assembly ( H ), as shown in Figure 3, see detail 5,
using ( 1 ) of lag screws ( F ), tighten screws using and allen wrench. Follow
the same instructions for left side front and rear leg assembly.
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST