/9)544+)::.+62;-,853:.+65=+895;8)+
'4*58:.+('::+8?6')1,853:.+65=+8:552
(+,58+ 3'1/4- '4? '*0;9:3+4:9 ).'4-/4-
'))+9958/+9 58 9:58/4- 65=+8 :5529 Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
:58+ /*2+ 65=+8 :5529 5;: 5, :.+ 8+'). 5,
)./2*8+4'4**545:'225=6+89549;4,'3/2/'8
=/:.:.+65=+8:55258:.+9+/49:8;):/549:5
56+8':+ :.+ 65=+8 :552 Power tools are
dangerous in the hands of untrained users.
'/4:'/465=+8:5529.+)1,583/9'2/-43+4:
58 (/4*/4- 5, 35</4- 6'8:9 (8+'1'-+ 5,
6'8:9 '4* '4? 5:.+8 )54*/:/54 :.': 3'?
',,+)::.+65=+8:552D956+8':/54,*'3'-+*
.'<+ :.+ 65=+8 :552 8+6'/8+* (+,58+ ;9+
Many accidents are caused by poorly
maintained power tools.
++6);::/4-:55299.'86'4*)2+'4Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
!9+ :.+ 65=+8 :552 '))+9958/+9 '4* :552
(/:9+:)/4'))58*'4)+=/:.:.+9+/49:8;):/549
:'1/4-/4:5'))5;4::.+=581/4-)54*/:/549
'4* :.+ =581 :5 (+ 6+8,583+* Use of the
power tool for operations different from those
intended could result in a hazardous situation.
+8</)+
'<+?5;865=+8:5529+8</)+*(?'7;'2/,/+*
8+6'/8 6+8954 ;9/4- 542? /*+4:/)'2
8+62')+3+4: 6'8:9 This will ensure that the
safety of the power tool is maintained.
-3-
',+:?;2+9,58/8);2'8'=9
+'*'229',+:?='84/4-9'4*'22/49:8;):/549
!
ARNING
++6 .'4*9 '='? ,853
);::/4- '8+' '4* :.+ (2'*+
++6?5;89+)54*.'4*54';>/2/'8?.'4*2+
5835:58.5;9/4- f both hands are holding
the saw, they cannot be cut by the blade.
5 45: 8+'). ;4*+84+':. :.+ =5816/+)+
The guard cannot protect you from the blade
below the workpiece.
*0;9::.+);::/4-*+6:.:5:.+:./)14+995,
:.+ =5816/+)+ Less than a full tooth of the
blade teeth should be visible below the
workpiece.
+<+8 .52* 6/+)+ (+/4- );: /4 ?5;8 .'4*9
58')8599?5;82+- +);8+:.+=5816/+)+:5
' 9:'(2+ 62':,583 t is important to support
the work properly to minimize body exposure,
blade binding, or loss of control.
52*:.+65=+8:552(? /49;2':+*-8/66/4-
9;8,')+9 542? =.+4 6+8,583/4- '4
56+8':/54 =.+8+ :.+ );::/4- :552 3'?
)54:'):./**+4=/8/4-58/:95=4)58*
Contact with a "live" wire will also make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
#.+4 8/66/4- '2='?9 ;9+ ' 8/6 ,+4)+ 58
9:8'/-.: +*-+ -;/*+ This improves the
accuracy of cut and reduces the chance of
blade binding.
2='?9 ;9+ (2'*+9 =/:. )588+): 9/@+ '4*
9.'6+ */'354* <+89;9 85;4* 5, '8(58
.52+9Blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
+<+8 ;9+ *'3'-+* 58 /4)588+): (2'*+
='9.+8958(52: The blade washers and bolt
were specially designed for your saw, for
optimum performance and safety of operation.
496+): :.+ )54*/:/54 '4* 7;'2/:? 5, :.+
=55* '4* 8+35<+ '22 4'/29 ,853 2;3(+8
(+,58+);::/4-Wet lumber, green lumber or
pressure treated lumber require special
attention during cutting operation to prevent
kickback.
52* :.+ 9'= ,/832? :5 68+<+4: 2599 5,
)54:852Figures in this manual illustrate
typical hand support of the saw.
+6+4*/4- ;654 ;9+ :.+ 9=/:). 3'? 45:
2'9::.+2/,+5,:.+9'=,:.+9=/:).9.5;2*
,'/2/4:.+BC659/:/54:.+9'=3'?45:
9:'8: , /: 9.5;2* ,'/2 =./2+ :.+ 9'= /9
8;44/4-:.+9'=3'?45:9.;:5,, f either
occurs, unplug the saw immediately and do
not use until repaired.
./9)/8);2'89'=9.5;2*45:(+35;4:+*:5
' :'(2+ '4* )54<+8:+* :5 ' :'(2+ 9'=
Circular saws are not designed or intended to
be used as table saws.
DANGER
!
