SKYDANCE LV User manual

Wiring diagram
0/1-10V
dimmer
+
Single color LED strip
LV
Uout=5-36VDC
Iout=8A
Pout=40-288W
Temp Range: -30℃~+55℃
+
Uin=5-36VDC
Iin=8.5A
OUTPU T
+
INPUT
0/1-10V
0/1-10V LED Dimming Driver
+
INPUT
5-36VDC
● 1 channel 0/1-10V input, 1 channel PWM constant voltage or constant current output.
● 0~100% dimming range via logarithmic characteristic can be very comfortable for human eyes.
● Smooth dimming without any flickering.
● Compatible with active or passive 0-10V, 1-10V dimmer, can solve the fluorescent lamp dimming system
compatible with LED lighting.
● 0/1-10V CV LED dimming driver can connect unlimited number of CV or CC power repeaters in series
or in parallel to expand output power.
0/1-10V LED Dimming Driver
(Constant Voltage or Constant Current)
Dimension
Feature
18 mm
97mm
33 mm
Model Name Input voltage Output current Output power Output type
LV 1CH 0/1-10V
CV dimming driver Constant voltage
5-36VDC 1CH,8A 40-288W
User Guide
Technical parameter
Power Supply
5-36VDC
Constant Voltage
AC110-230V
●LV
27mm
175mm
160mm
45mm
LC 1CH 0/1-10V
CC dimming driver Constant current12-48VDC 1CH,150-1800mA
( )customized 1.8-86.4W
LV-L1CH 0/1-10V and Push-dim
CV dimming driver Constant voltage
12-36VDC 1CH,12A 144-432W
0/1-10V input
LV / LC
LV-L
Interface specification
0/1-10V input
Power input
LED output
LV
Uout=5-36VDC
Iout=8A
Pout=40-288W
Temp Range: -30℃~+55℃
+
Uin=5-36VDC
Iin=8.5A
OUTPUT
+
INPUT
0/1-10V
0/1-10V LED Dimming Driver
+
INPUT
5-36VDC
Power input LED output External push switch
The 0/1-10V LED dimming driver is designed with 1 channel 0/1-10V input and 1 channel PWM output. 0%-100%
dimming range via logarithmic characteristic can be very comfortable for human eyes. 256 levels of grey scale
enable the LED dimmer to adjust brightness softly and smoothly without any flickering. Besides 0/1-10V signal,
the dimming driver can be controlled by push switch and potemtiometer as well.
0/1-10V LED Dimming Driver

Safety information
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller, please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of
the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid
any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Malfunctions analysis & troubleshooting
Malfunctions
Uneven intensity
between front and
rear,with voltage
drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supplycapability.
4. Overload beyond controller capability.
1. No power.
2. Wrong connection or insecure.
No light
Causes Troubleshooting
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
1. Check the power.
2. Check the connection.
For LV, LED power supply voltage and power select :
● 5V lamp, Input 5V power supply, can load 0~40W,
● 12V lamp, Input 12V power supply, can load 0~96W,
● 24V lamp, Input 24V power supply, can load 0~192W,
● 36V lamp, Input 36V power supply, can load 0~288W,
The power supply power must larger than load power 20%.
● Input 48V power supply, can series connect 1~13pcs LED,
● Input 36V power supply, can series connect 1~10pcs LED,
● Input 24V power supply, can series connect 1~6pcs LED,
● Input 12V power supply, can series connect 1~3pcs LED.
For LC, LED power supply voltage select:
Power supply select guide
For LV-L, LED power supply voltage and power select :
● 12V lamp, Input 12V power supply, can load 0~144W,
● 24V lamp, Input 24V power supply, can load 0~288W,
● 36V lamp, Input 36V power supply, can load 0~432W,
The power supply power must larger than load power 20%.
●LC
Power Supply
12-48VDC
Constant Voltage
Drives 1-13pcs Hi-power LED
AC110-230V
0/1-10V
dimmer
LC
+
OUTPU T
+
INPUT
0/1-10V
0/1-10V LED Dimming Driver
+
INPUT
12-48VDC
Uout=12-48VDC
Iout=150-1800mA
Pout=1.8-86.4W
Temp Range:-30℃~+55℃
Uin=12-48VDC
Iin=2.0A
Power Supply
12-36VDC
Constant Voltage
AC110-230V
Push switch
(optional)
0/1-10V
dimmer
+
Single color LED strip
●LV-L
Push switch function
1. Short press: Turn on/off light.
2. Long press(1-5s): When light is on, increase or decrease brightness continuously.
3. Long press(10s): When multiple dimming controller share a push switch, achieve simultaneous
adjustment.
0/1-10V LED Dimming Driver