Skyfood LAR-15LMBE User manual

www.skyfood.us
Commercial Tilting Blender / Licuadora Comercial Basculante
LAR-15LMBE/LAR-25LMBE
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
KIT: 657778

1. Introducon ...................................................................................... 3
1.1 Safety .................................................................................................................... 3
1.2 Main Components ................................................................................................. 4
1.3 Technical Characteriscs ........................................................................................ 5
2. INSTALLATION and PRE OPERATION .................................................5
2.1 Installaon ............................................................................................................ 5
2.2 Pre Operaon ........................................................................................................ 5
2.3 Safety System ........................................................................................................ 6
3. Operaon .......................................................................................... 7
3.1 Starng.................................................................................................................. 7
3.2 Operang Procedures ............................................................................................ 7
3.3 Discharging Procedures.......................................................................................... 7
3.4 Cleaning................................................................................................................. 7
4. General Safety Pracces .................................................................... 8
4.1 Basic Operaon Pracces....................................................................................... 8
4.2 Safety Procedures and Notes before Switching the Machine ON ............................ 9
4.3 Roune Inspecon................................................................................................. 9
4.4 Operaon .............................................................................................................. 9
4.5 Aer Finishing The Work.......................................................................................10
4.6 Maintenance ........................................................................................................10
4.7 Warning................................................................................................................10
5. Analysis and Problems Solving......................................................... 11
5.1 Problem, causes and soluons..............................................................................10
6. General Advices............................................................................... 11
7. Electric Diagram............................................................................... 12
SKYFOOD EQUIPMENT LLC - SERVICE ................................................... 14
SKYFOOD’S LIMITED WARRANTY ......................................................... 16
SUMMARY

3
1. Introducon
1.1 Safety
The High Performance Industrial Tilng Blenders are machines simple to use and to clean.
However for your safety read the following instrucons in order to avoid accidents:
1.1.1 Always unplug the machine when cleaning, servicing or when any other operaon is
needed.
1.1.2 Never use tools that do not belong to the machine during operaon.
1.1.3 Never throw water directly to the machine.
1.1.4 Do not operate the machine wearing wet clothes or wet shoes.
1.1.5 Before operang the machine be sure it is grounded properly.
1.1.6 When washing inside the Cup # 02 (Pic. 01) be careful with the blade as it has sharp
edges.
1.1.7 For your safety, the temperature of the processed products shall not exceed 40 °
Celsius / 104° Fahrenheit.

4
1.2 Main Components
All components are made with carefully selected materials, in accordance with Skyfood
experience and standard tesng procedures.
PICTURE 01
01- Lid
02 Lid Cap
03- Cup
04- ON/OFF Switch
05- Motor Housing
06- Tilng Pedal
07- Stand
01
03
06
04
07
02
05

5
TABLE 01
1.3 Technical Characteriscs
2. INSTALLATION and PRE OPERATION
2.1 Installaon
The High Performance Tilng Blenders were developed to be used in 115 or 230 voltages:
Upon receiving the Blender check the voltage.
The cord has two at pins and one round this last one is ground. It is mandatory the three
pins to be duly connected before to start the machine .
2.2 Pre Operaon
First of all check if the Blender is rm in its posion. Check if Motor (# 01) is perfectly ed
on the Lock Pedal (# 02) as shown on the Picture below.
IMPORTANT
Before doing any maintenance in the machine switch it OFF and unplug it.
PICTURE 01
01 - Motor
02 - Pedal Lock
CHARACTERISTICS UNIT LAR-15LMBE LAR-25LMBE
Voltage V 115/230 115/230
Frequency Hz 60 60
Rang CV 1,5 1,5
Height in 42 1/2 46 1/4
Width in 14 15 1/3
Depth in 9 23/25 9 23/25
Net Weight lb 46,3 49,4
Gross Weight lb 70,5 74,5
Rotaon rpm 3500 3500
02
01

6
2.3 Safety System
This equipment has a safety system to protect the engine. If the machine is operang
under overload or if any food blocks the rotaon of the blade, the protecon switch will
disarm to prevent burns to the motor.
If this happens, please wait a few minutes. Then press the Circuit Breaker reset buon
(No. 2, Pic.02)
PICTURE 02
02

7
NOTE
Due to turbulence generated when machine is ON do not turn it ON without the
Lid # 01 (Pic.01). The processing me depends on the kind of product.
IMPORTANT
NEVER SWITCH THE MACHINE ON WITHOUT LOAD IN IT BECAUSE IT WILL CAUSE
IRREPARABLE DAMAGES.
IMPORTANT
It is not recommended to blend products without the addion of any liquid,
otherwise it will overheat and damage the Cup seal.
3. Operaon
3.1 Starng
The Blender is acvated by turning the On/O Switch # 03 (Pic.01) to ON posion.
3.2 Operang Procedures
The High Performance Tilng Blender works at high speed (approximately 3.500 rpm) To
feed it proceed as follows:
1 – Remove the Lid # 01 (Pic.01).
2 – Put product inside the Cup # 02 (Pic.01) with the machine switched OFF.
3 – Place the Lid # 01 (Pic.01) back on top of the Cup and switch the machine ON.
3.3 Discharging Procedures
To discharge processed product from Blender proceed as follows:
1- Turn machine OFF.
2- Remove Lid # 01 (Pic. 01).
3- Press Lock Pedal # 06 (Pic. 01) down.
4-Tilt Cup # 02 (Pic. 01) holding its handle and discharge processed product as needed.
3.4 Cleaning
The new Blenders cup has stamped ribs that facilitate cleaning. Wash the Lid # 01 and the
Cup # 02 (Pic. 01) with water and neutral soap. Wipe up the other parts with a damp cloth.
IMPORTANT
Never do cleaning with machine plugged in. Always unplug machine before
cleaning. When washing inside the Cup be careful with the blade.
IMPORTANT
DO NOT RUN DRY.

8
The following safety instrucons are addressed to both the operator of the machine as well
as the person in charge of maintenance.
The machine has to be delivered only in perfect condions of use by the Distributor to the
user. The user shall operate the machine only aer being well acquainted with the safety
procedures described in the present manual. READ THIS MANUAL WITH ATTENTION.
4.1 Basic Operaon Pracces
4.1.1 Dangers
Some areas of the electric device have parts that are connected or have parts connected
to high voltage. These parts when touched may cause severe electrical shocks or even be
lethal.
Never touch manual commands such as switches, buons, turning keys and knobs with
your hands wearing wet clothes and/or wet shoes. By not following these instrucons
operator could be exposed to severe electrical shocks or even to a lethal situaon.
4.1.2 Warnings
* The operator has to be well familiar with the posion of ON/OFF Switch to make sure the
Switch is easy to be reached when necessary.
* Before any kind of maintenance, physically remove plug from the socket.
* Provide space for a comfortable operaon thus avoiding accidents.
* Water or oil spilled on the oor will turn it slippery and dangerous. Make sure the oor
is clean and dry.
* Before using any commands (switch, buons, lever), be sure it is the correct one. In case
of doubt, consult this manual.
* Never touch any manual commands (switch, buons, lever) unadvisedly.
* If any work is to be made by two or more persons, coordinaon signs will have to be given
for each operaon step. Every step of the operaon shall be taken only if a sign has been
made and responded.
4.1.3 Advices
* In case of power shortage, immediately switch the machine o.
* Use recommended or equivalent lubricants, oils or greases.
* Avoid mechanical shocks, once they may cause damages or bad funconing.
* Avoid water, dirt or dust contact to the mechanical and electrical components of the
machine.
* DO NOT change the standard characteriscs of the machine.
* DO NOT remove, tear o or maculate any safety or idencaon labels stuck on the
IMPORTANT
If any recommendaon is not applicable to your equipment, please ignore it.
4. General Safety Pracces

9
machine. If any labels have been removed or are no longer legible, contact your nearest
dealer for replacement.
4.2 Safety Procedures and Notes before Switching the Machine ON
IMPORTANT
Carefully read ALL INSTRUCTIONS of this manual before turning the machine ON.
Be sure to well understand all the informaon contained in this manual. If you
have any queson contact your supervisor or your nearest Dealer.
4.2.1 Danger
An electric cable or electric wire with damaged jacket or bad insulaon might cause
electrical shocks as well as electrical leak. Before use, check the condions of all wires and
cables.
4.2.2 Advices
Be sure to well understand all the informaon contained in this manual. Every operaon
funcon or procedure has to be thoroughly clear.
Before using any commands (switch, buons, lever), be sure it is the correct one. In case
of doubt, consult this manual.
4.2.3 Precauons
The electric cable has to be compable with the power required by the machine.
Cables touching the oor or close to the machine need to be protected against short
circuits.
The oil reservoirs have to be lled unl the indicated level. Check and rell if necessary.
4.3 Roune Inspecon
4.3.1 Advice
When checking the tension of the belts or chains, DO NOT insert your ngers between the
belts and the pulleys and nor between the chain and the gears.
4.3.2 Precauons
Check the motor and sliding or turning parts of the machine in case of abnormal noises.
Check the tension of the belts and chains and replace the set when belts or chains show
signs of wearing.
When checking the tension of belts or chains DO NOT insert your ngers between belts
and pulleys, nor between the chains and gears.
Check protecons and safety devices to make sure they are working properly.
4.4 Operaon
4.4.1 Warnings
Do not use the machine with long hair that could touch any part of the machine. This might
lead to a serious accident. Tie your hair up well and/or cover it with a scarf.
Only trained or skilled personnel shall operate this machine.

10
Never touch turning parts with your hands or any other way ,
NEVER operate the machine without any original safety devices under perfect condions.
4.5 Aer Finishing The Work
4.5.1 Precauons
Always TURN THE MACHINE OFF before cleaning by removing the plug from the socket.
Never clean the machine unless it has come to a complete stop.
Put all the components back to their funconal posions before turning the machine ON
again.
Check the level of oil.
Do NOT insert your ngers in between belts and pulleys nor chains and gears.
4.6 Maintenance
4.6.1 Danger
Any maintenance with the machine in working situaon is dangerous. TURN IT OFF BY
PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
4.7 Warning
Electrical or mechanical maintenance has to be undertaken by qualied personnel. The
person in charge of maintenance has to be sure that the machine is under TOTAL SAFETY
condions when working.
5. Analysis and Problems Solving
5.1 Problem, causes and soluons
The High Performance Tilng Blenders were designed to operate with the need of
minimum maintenance but the natural wearing caused by long use of the equipment may
occasionally cause some malfuncons.
If such problem occurs with your Blender refer to Table 02 in which the most common
situaons are listed with recommended soluons.
IMPORTANT
Always remove the plug from the socket in any emergency situaon.

11
TABLE 02
PROBLEM CAUSES SOLUTIONS
The machine does not switch
on
Lack of electric power
Problems in the electrical circuit
Check if machine is plugged
and if there is power in the
power supply source.
Call technical assistance
Cup is leaking Damaged seal Call technical assistance
6. General Advices
- Do not wear loose ng clothes while operang the unit. Do not use bracelets or any
other piece of jewelry. Have your hair always shortened and held up (use hair shnets if
necessary) in a way it cannot reach any part of the machine. Roll up any loose sleeves.
- SKYFOOD is not responsible for any harm or injury caused by the negligent or inappropriate
use of this equipment by any operator. This equipment must be operated only by persons
whose age equals or exceeds 18 years old, in a safe and sound state of mind, free from the
inuence of any kind of drugs and alcohol, that received proper training and instrucons
regarding the correct operaon of this machine, that are wearing correct and authorized
safety clothes. All and any kind of modicaons carried on and applied to this machine
immediately nullies any kind of warranty and may result in harm and injuries to the
individuals operang this machine and to individuals that are located in the machine
surrounding areas while it is being operated.
- Under no circunstances place your hands in the moving parts of the machine while it
is being used. Make sure the machine has come to a complete stop before acessing the
processed ingredients.

12
7. Electric Diagram
GROUNDING MUST BE
DONE ON THE MACHINE
FRAME.
ELECTRIC NETWORK
ON/OFF
MOTOR
Mini circuit
breaker 25A

13
ELECTRIC NETWORK
ON/OFF
GROUNDING MUST BE
DONE ON THE MACHINE
FRAME.
MOTOR
Mini circuit
breaker 12A
Mini circuit
breaker 12A

14

15

16
786 522 6765

17
INDICE
1. Introducción ................................................................................... 18
1.1 Seguridad .............................................................................................................18
1.2 Principales Componentes......................................................................................19
1.3 Caracteríscas Técnicas.........................................................................................20
2 INSTALACIÓN Y PRE OPERACIÓN....................................................... 20
2.1 Instalación ............................................................................................................20
2.2 Pre – Operación ...................................................................................................21
2.3 Sistema de seguridad............................................................................................21
3. Operación........................................................................................ 21
3.1 Accionamiento......................................................................................................21
3.2 Procedimiento para Ulización .............................................................................20
3.3 Procedimiento para descarga................................................................................21
3.4 Limpieza ...............................................................................................................22
4. Nociones Generales de Seguridad.................................................... 23
4.1 Praccas Básicas de Operación .............................................................................23
4.2 Cuidados y Observaciones Antes de Prender la Maquina. .....................................24
4.3 Inspección de Runa ............................................................................................24
4.4 Operación.............................................................................................................25
4.5 Después de Terminar el Trabajo ............................................................................25
4.6 Manutención ........................................................................................................25
4.7 Aviso ....................................................................................................................25
5. Análisis y Solución de Problemas .................................................... 25
5.1 Problemas, Causas y Soluciones ...........................................................................25
6. Consejos Generales.......................................................................... 26
7. Diagrama Eléctrico .......................................................................... 27
SKYFOOD EQUIPMENT LLC - SERVICIO ................................................. 29
GARANTIA LIMITADA DE SKYFOOD ...................................................... 31

18
1. Introducción
1.1 Seguridad
Las Licuadoras Basculantes de Alto Rendimiento, son maquinas simples de se operar y de
fácil limpieza, sin embargo para su mayor seguridad lee las instrucciones abajo para evitar
accidentes:
- Desconecte la maquina de la red eléctrica cuando desear hacer la limpieza, la manutención
o otro cualquier servicio.
- Nunca usar instrumentos fuera a los que acompañan la maquina para auxiliar en su
operación.
- Mantenga las manos lejanas de las partes movibles.
- Nunca use chorros de agua directamente sobre la maquina.
- Nunca ligue la maquina con las manos, los zapatos o ropas mojadas.
- Cuando se haga la instalación de la maquina no sea olvidado de hacer la conexión de
erra. Una buena conexión a la erra es importante para la seguridad suya y del equipo.
- Al lavar el interior del Vaso Nº 02 (Fig.01) tome cuidado con la cuchilla, pues la misma
posee hilos cortantes.
- Para su seguridad, la temperatura de los productos procesados no deberá superar los 40
° Celsius / 104° Fahrenheit.

19
1.2 Principales Componentes
Todos los componentes que incorporan la maquina son construidos con materiales
cuidadosamente seleccionados para su función.
FIGURA 01
01 - Tapa
02 - Sobre Tapa
03 - Vaso
04 - Llave Prende/Desliga
05 - Gabinete
06 - Pedal
07 - Caballete
01
03
06
04
07
02
05

20
TABLA 01
CARACTERISTICAS UNIDAD LAR-15LMBE LAR-25LMBE
Voltaje V115/230 115/230
Frecuencia Hz 60 60
Potencia CV 1,5 1,5
Altura mm 1060 1180
Largura mm 360 410
Ancho mm 525 525
Peso Neto kg 19 20,5
Peso Bruto kg 23 24
Rotación rpm 3500 3500
1.3 Caracteríscas Técnicas
2 INSTALACIÓN Y PRE OPERACIÓN
2.1 Instalación
La Licuadora Basculante de Alto Rendimiento debe ser instalada sobre una supercie de
trabajo estable y plana.
Las licuadoras basculantes de alto rendimiento fueran diseñadas para conectarse a 115 or
230 V, al recibir la maquina verique el voltaje de la red eléctrica. El voltaje de la red y
de la maquina debe ser el mismo .
El cable de alimentación posee un enchufe con dos pernos planos y uno redondo, este
ulmo es la erra. Es obligatorio que los tres estén debidamente conectados antes de usar
el equipo .
2.2 Pre – Operación
Inicialmente verique si la Licuadora está rme en su posición. Antes de usarla, observe
el perfecto encaje del Motor Nº 01 con la Traba del Pedal Nº 02 conforme la foto abajo.
01 - Motor
02 - Trava del Pedal
02
01