SkyVac Internal 37 User manual

SkyVac Internal 37 Model Assembly/User Guide
Aug 201

SkyVac Assembly
Push the long flexi hose cuff into vac port
Screw other end of
hose (anti clockwise)
into black cuff that
fitted to one of your
carbon fibre tubes
Always use the Filter to protect the Motor
The drum cartridge must be kept in
place at all times. Dust & debris will
collect inside the bin
Alternatively fit filter bag with drum
filter to collect debris inside the bag
this will also give ultra
fine filtration
KEEP FILTER CLEAN

Push blue tool
holder onto end pole
Connect poles together
to the desired height
It is Unnecessary to
push together hard they
may stick
Push end cuff over your base pole
Select end tool to
suit application
GOOD PRACTISE
Don’t
Force the suction pole joints together.
Ensure the joints are free from dust and grit before putting together. Wipe the joints with a
damp cloth. Grit can lock the joints up!
Do’s
Occasionally spray the carbon fibre joints with Silicone Spray
eep filters clean in your vacuum to keep retain suction power
When connecting poles together ensure they are free from grit and debris to prevent
premature wear.
See your dealer for spare dust bags and specialist end tool not included is the standard kit
SPECIAL END TOOL S AS DEALER FOR DETAILS