Slinex Innovation Direct Series User manual

{ Design. Uniqueness. Innovations }
INNOVATION
DIRECT
SERIES
ML-20IP IP video door station
User manual
Thank you for
choosing our equipment

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
1 2
Table of contents
1. Package ...........................................................................................................................................................................................3
2. Specication..................................................................................................................................................................................3
3. Description.....................................................................................................................................................................................4
4. Installation......................................................................................................................................................................................5
4.1 Cable requirements......................................................................................................................................................5
4.2 Schematic diagrams.....................................................................................................................................................5
4.3 Unit mount ......................................................................................................................................................................7
5. Software..........................................................................................................................................................................................8
5.1 Сreating new account .................................................................................................................................................8
5.2 Wired network connection steps.............................................................................................................................8
5.3 Wireless Wi-Fi network connection steps.......................................................................................................... 10
5.4 Operation...................................................................................................................................................................... 12
5.5 Notication messages.............................................................................................................................................. 13
5.6 RTSP support ............................................................................................................................................................... 14
6. Limited Warranty....................................................................................................................................................................... 16
Rev. 4.0
Attention!
As a result of continuous upgrades and functionality improvements, technical
characteristics of the device can be changed without any preliminary declaration.
This manual can contain some inaccuracy or misprint. The owner reserves the right to
make corrections to the information described in the user manual and device package.
The last revision of this manual is available on www.slinex.com
Safety instructions
Please read and keep that manual.
The device installation process should be carried out by the qualied specialists.
Use the device from the –40 ˚C to +50 ˚C (–40 ˚F to 122 ˚F), always keep it within that temperature range.
Installation surface should be free from vibration and impact inuence.
Keep this device far from open sources of heat, such as radiators, heaters, and ovens.
The device can be installed near other electronic equipment in case if the temperature of the environment
does not exceed previously mentioned range.
The device should be protected from the direct inuence of the natural phenomena, such as direct sunlight,
rain or snow.
Don’t use aggressive or abradant detergent for the device surface cleaning.
Use soft wet cloth or tissues to remove strong dirt.
Nature protection
Don’t throw away the device with other industrial or nutritive trash if you see that
symbol. Some regions have separation and recycling systems for the electronic
equipment. Connect with local authorities to receive information about recycling of
electronic equipment for your region.
Rights and limitation of liability
All rights reserved. Any part of that document can not be published in any form, translated into other
languages or reproduced in any way including electronic or mechanical.
Document recording and copying are strictly forbidden without owner permission.
!

Network RJ-45 connector
{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
3 4
Sensor type
Sensor resolution
View angle
Backlight type
Voltage
Lock relay continuous current
Power consumption
Mounting type
Size
Working temperature
1/4”CMOS with mechanical IR cut lter
1,0 Mp
145˚
Infra-red, 1 m. distance
+12 V
1A
Maximum 3 W
Surface or ush mount
45×130×24 mm (1.77×5.12×0.94”)
–40 ... +50 ˚C (–40... +122 ˚F)
White & green
Green
White & orange
Orange
Red
Black
Yellow
White
Brown
Grey wire with SMA connector
Not connected
Not connected
Green wire
Not connected
Not connected
White & green wire
Orange wire
White & orange wire
1
2
3
4
5
6
Microphone
Infra-red night backlight
Video camera
Call button
Speaker
Rain shield mounting hole
1. Package
Video door station ML-20IP – 1 pc.
Angle bracket – 1 pc.
Surface mount bracket – 1pc.
Rain shield – 1 pc.
Flush mount bracket – 1 pc.
Power supply – 1 pc.
External Wi-Fi antenna – 1pc.
Mounting screws and nuts – 1 pkg.
User manual – 1 pc.
2. Specication
5
1
2
3
46
3. Description
Connection wires color code for ML-20IP door station
Type B
130 mm (5.12")
45 mm (1.77") 24 mm
(0.94")
Network, white & green wire
Network, green wire
Network, white & orange wire
Network, orange wire
Power, +12 V
Ground
Video (analog, for the 4-wire monitors)
Audio (analog, for the 4-wire monitors)
2 wires for the lock connection
External Wi-Fi antenna

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
5 6
4. Installation
4.1 Cable requirerments
Disconnect all power cables before device installation.
This device can be connected with such cable types:
) Use 2- or 4-wire cable for the video door station power and electronic lock power
• distance up to 25 meters (82 ft.) use a cable with 0,22 mm square of one wire (AWG 24);
• distance 25 to 50 (82-164 ft.) meters use a cable with 0,41 mm square of one wire (AWG 21);
• distance 50 to 100 meters (164-328 ft.) use a cable with 0,75 mm square of one wire (AWG 18).
b) Local network connection should be made with shielded or non-shielded twisted pair:
• distance up to 25 meters (82 ft.) non-shielded twisted pair can be used;
• distance 25 to 100 (82-328 ft.)meters shielded twisted pair should be used.
Also wireless Wi-Fi connection can be used for the local network. In that case, there is no need to use twisted
pair cable. Instead of twisted pair cable you should use Wi-Fi antenna connected to the SMA plug of the
video door station.
Note:
Volume setting can be made by the screwdriver inserted into the hole on the back part of the door station.
The hole is situated on the bottom part of the back pannel and covered by the rubber cap.
Android / iOS
Internet
Internet
3G / Wi-Fi
Router
Router
PC
WAN 1 2 3 4
Diagram 2. ML-20IP network wired connection by twisted pair cable
4.2 Schematic diagrams
Diagram 1. ML-20IP power and lock connection
Door station power
supply ~ 220 V / +12 V
External
Wi-Fi antenna
Analog 4-wire
monitor
SMA plug for
external
Wi-Fi antenna
Twisted pair RJ-45
ML-20IP
Video door station
ML-20IP
Video door station
ML-20IP
Video door station
Lock Lock power
supply
Brown
Brown
Red & White
Black
Red
Black
White
Yellow
White & Green
Green
White & Orange
Orange
Diagram 3. ML-20IP network wireless Wi-Fi connection
Android / iOS
3G / Wi-Fi
Wi-Fi (LAN)
«Access point»
mode
PC
WAN 1 2 3 4
Android / iOS
Power
Ground
Audio
Video
RJ-45
Twisted pair
cable pinout
Type 
8 7 6 5 4 3 2 1
White & Green
Green
White & Orange
Orange
White & Orange
Orange
White & Green
Green
Type B
8 7 6 5 4 3 2 1

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
7 8
4.3 Unit mount
Angle bracket mount
1) Take the angle bracket from the kit and place it 150-160 cm (4.9-5.2 ft.) from the oor line.
2) Mark and drill two halls in the wall.
3) Take two wall anchors from the kit and hammer them into the drilled halls.
4) Fix the angle bracket on the wall by the screws from the kit.
5) Then x surface mount bracket over the angle bracket by two bolts from the kit.
6) Connect all communication wires and x the door station on the surface mount bracket by one bolt from
the bottom side.
Surface mount
1) Take the surface mount bracket from the kit and place it 150-160 cm (4.9-5.2 ft.) from the oor line.
2) Mark and drill four halls in the wall.
3) Take four nuts from the kit and hammer them into the drilled halls.
4) Fix surface mount bracket on the wall by four screws from the kit.
5) Connect all communication wires and x the door station on the surface mount bracket by one bolt from
the bottom side.
5. Software
Enter «Google Play»(for Android) or «Apple App Store»(for iOS) and search for «Cloud Call»application,
then install this applicationи on your mobile device.
Below you can nd basic steps how to add new device to «Cloud Call» application.
Full manual on «Cloud Call» application you can nd on www.slinex.com
5.1 Creating new account
1) Start «Cloud Call» application on your mobile device and press «NEW USER» button to create an account;
2) Fill in «Email» box and press «GET CODE» button;
3) Check for a new message with activation code on your Email account and enter it into «Verication
Code» box;
4) Fill in «Password» and «Conrm Password» boxes and press «CONFIRM» button to create new account.
That password will be used to login into created account.
5.2 Wired network connection steps
1) Use twisted pair CAT5 or CAT6 cable to connect device to the router;
2) Connect mobile device into the same local network;
3) Press «CONNECT NEW DEVICE» button, then choose «EXISTING» check box and press «CONFIRM»
button;
4) New devices search will be applied and you will see the list of the devices, connected to the local
network;
!

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
9 10
5) Tap on UID in the left column, corresponding to the device sticker or press «QR CodeScan» button and
then scan QR code on your device sticker if device UID isn’t in the list;
6) Fill in device information:
Device UID: unique identication number of the device (already lled);
Device Name: any name you like;
Password: 888888 (by default);
then press «CONFIRM» button and you will see added device on the main bar.
5.3 Wireless Wi-Fi network connection steps
1) Connect mobile device into the Wi-Fi network you want to connect outdoor panel;
2) Disable 3G/4G internet connection on your mobile device;
3) Press «CONNECT NEW DEVICE» button, then choose «NEW» check box and press «CONFIRM» button;
4) On the outdoor panel enter into «Access point» mode following next steps:
Press&hold call button →rst short «beep» sound →release call button and quickly press&hold it again
→ second short «beep» sound →release call button and quickly press&hold it again →third double
«beep» →release call button → door station will be restarted and then after a minute you will hear
constant «beeps» sound. It means the door station entered «Access point» mode.
5) Press «CONTINUE» button on the mobile device screen to go to the next step;
6) Enter password of the Wi-Fi network which you want to connect to and press «CONTINUE» button;

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
11 12
7) Fill in device information:
Device UID: unique identication number of the device (already lled);
Device Name: any name you like;
Password: 888888 (by default);
then press «CONFIRM» button and you will see added device on the main bar.
Notes:
1) If there is no LAN cable connected to the monitor or outdoor panel on the rst boot then it will automatically
go into «Access point» mode and you can skip 4th step of section 5.3.
2) If device is already added to some account, you can’t add it to another one, only can share it with other
account.
5.4 Operation
Tap on the device
image to start
monitoring
Main bar Device bar
Tap on the recycle
bin to delete
this devise from
the account
Talk with
the visitor
Hang on
Door unlock
(Default password:
888888)
Disable
monitoring
Tap on settings icon
to enter device
settings
Change default
device password
Motion detection
settings
SD card
information
Door panel/
monitor
rmware update
List of
shared
devices
Change
default
unlock
password
Time sync
with mobile
device
Default
settings/
reboot
Share
device with
other
account

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
13 14
5.6 RTSP support.
Thу ML-20IP door station supports video streaming through the RTSP (Real Time Streaming Protocol). This
function allows us to view or record video on the PC or NVR (Network Video Recorder).
RTSP string format: rtsp://192.168.0.113:554/11, where 192.168.0.113 is the IP address of the door station.
For example, we can view real-time video stream through the VideoLAN (VLC) media player.
Choose «Media» → «Open network stream» or press Ctrl+N combination on the keyboard.
Enter RTSP string in «Please enter a network URL» eld. Then press «Play» button to start viewing video
stream from the door station.
5.5 Notication messages
Press button to activate notification
messages preset.
Home mode – notification messages
are disabled;
Away mode – notification messages are
enabled;
Custom mode – notification messages
can be enabled or disabled depending
on the settings inside that preset;
In case notification messages are
enabled then you wil receive push
message if somebody presses call
button on the outdoor panel.
Press «ANSWER» button to start talking
with the visitor or «CANCEL» button to
stop the call.
Take a
snapshot Record video
Speaker volume/
microphone
sensitivity
Full screen
mode
Image quality:
HD or SD
Note:
While device monitoring, one way audio is constantly active from the outdoor panel side so you can hear
what hapens nearby. To activate two way communication press «Talk with the visitor» button in the
application.
Call

{ Design. Uniqueness. Innovations } INNOVATION
DIRECT
SERIES
15 16
6. Limited warranty
Manufacturer guarantees product normal functioning during the warranty period if the user keeps all safety
instructions described in that manual.
Warranty period is 12 months from the moment of the product purchasing (warranty period could be
extended up to 24 months or more, depending on the local regulations).
Warranty period allows user to make guarantee repair in cases when normal functioning of the product was
violated by the fault of manufacturer and the user haven’t oend transporting, installation and working
conditions.
This limited warranty does not cover any damage to the product that results from improper installation,
accident, abuse, misuse, natural disaster, insucient or excessive electrical supply, abnormal mechanical or
environmental conditions, or any unauthorized disassembly, repair or modication.
Warranty void in such cases:
• the product was damaged by the fault of the customer;
• the product wasn’t properly installed according reccomendations from the manual;
• the sticker on the backside of the product was broken;
• the product was not used for its intended function.
This limited warranty covers only repair, replacement, refund or credit for defective products, as provided
above. Manufacturer is not liable for, and does not cover under warranty, any damages or losses of any kind
whatsoever resulting from loss of, damage to, or corruption of, content or data or any costs associated with
determining the source of system problems or removing, servicing or installing products. This warranty
excludes third party software, connected equipment or stored data. Manufacturer is therefore not liable for
any losses or damage attributable to third party software, connected equipment or stored data.
In the event a product has been discontinued, manufacturer shall either repair the product, oer to replace
it with a comparable product or provide a refund at the lesser of the purchase price or the product’s current
value.
Repaired or replacement products will continue to be covered by this limited warranty for the remainder of
the original warranty term.