Slinex RD-30 User manual

RD-30
Wireless Digital
Video Doorbell
USER’S MANUAL
Revision 02

3
Congratulations
Safety Precautions
Prior To Use
To reduce the risk of electrical shock and injury, please follow
these basic safety precautions before using the product.
1. Carefully read and observe the instructions in this manual.
2. Follow all warnings marked on the unit.
3. Must set the time and the date when replace batteries.
3. Unplugthis product from the wall outlet before cleaning, then
use a damp cloth to wipe. Do not use liquid or aerosol
cleaners.
4. Do not place objects on the line cord that may cause
damage.
5. Do not place the Outdoor phone near the metal.
6. Pay attention to the polarity of the batteries, insert the
rechargeable batteries in accordance with polarity symbols
(this instruction is found in the installing batteries section.)
7. Keep out of the reach of children.
8. Use only in the described manner.
9. Stop using if it becomes damaged.
1
Design and specifications are subject to change without notice.
Indoor phone
Receiving Frequency Range 2.400 GHz 2.4835 GHz
Monitor 2.4'' Color LCD
Date Rate 2.0 Mbps
Receiving Sensitivity -90dBm
Demodulation Type GFSK/FSK
Resolution 320 240 (RGB)
Transmitting Power 19dBm(TYP)
Power Requirement 3 Ni-MH1.2V,800mAh
Power Consumption 450 mA Max
Operating Temperature -10 40
Operating Humidity 0% 85% RH
Weight 110 g
Size(WXHXD) Handset: 165 5
0
27mm
Charger : 79 77 42 mm
No. of outdoor phones
supported Max. 4
Item Detail
Technical Specification
2 0
-
-
pc.
+ -
-
°C
x x
xx
Thank you for choosing our quality product. Please read the
manual carefully before installing your system and follow all of
the directions to ensure proper installation.

Technical Specification
Outdoor phone
Transmit Frequency Range 2.400 GH
z
2.4835 GHz
Date Rate 2.0 Mbps
Transmitting Power 19d Bm (TYP)
Modulation Type GFSK/FSK
Transmitting Distance Outdo or : 2 00 m, door: 50m
Image Sensor Type 1/4 Color CMOS Image Sensor
Effective Pixels H:320 V:240
Image Processing Motion JPEG
Image Resolution / Frame Rate H:320 V :240 / 25fps
White Balance Auto
Lens 4.3mm / F2.8
Viewing Angle (Diagonal)
50
Minimum Illumination 1 LUX (without LED illumination)
LED 6 LEDs
Power Requirement
+9 - 12V DC-5% or 2-LR14 (C), 1.5V batteries
Power Consumption 500mA Max (cells),
400mA Max (+12V DC)
Operating Temperature -30 40
Operating Humidity 0% 85% RH
Weight 166 g
Size(W H D) 185 68 50 mm
Item Detail
19
Supports up to 4 outdoor units
2.4'' (320x240) QVGA LCD display
Video resolution: 320 x 240, with 25pics per second
Wide angle lens and LED for night vision
Long standby doorbell (battery up to 2 years or connect with
DC +9 12V)
Water-proof outdoor station IP55
Microphone and speakerphone
Brightness and talk volume are adjustable
Crystal sound quality
Transmitting distance: with up to 200 m range out of doors
Transmitting distance: with up to 50 m range indoors
Remote door opening (Optional)
DIY installation to save high labor cost
Introduction
2
-
-
-
°
+ - °C
-
x x
x x
In

Once you have unpacked your product, make sure that all the
parts shown below are available. If any pieces are missing or
broken, please promptly call your dealer.
Adapter
(7.5V, 300mA)
3 AAA Ni-MH
batteries
Outdoor phone
rear cover
Rain Cover
User' s Manual
Unpacking
Screws
3
Indoor phone
(Handset)
Indoor phone
(Charger)
Outdoor phone
Engineering Mode
1. Pressand hold the and beneath Menu at the same
time about 5 seconds in standby mode, then the display will
show as follow:
Registration
Cleared !
Delete the Usege Mode
1 8
Unlock Time
1# 5 S
Antenna
(Optional)
3. Then press Up or Down to change the unlock time.
After a set time, press the Save.
Change the Unlock Time
1. Press and hold the and beneath Menu at the
same
time about 5 seconds in stanby mode, then the display will show as
follow:
2. Press Left or Right to select the desired panel.

Layout
Camera
LED light
Microphone
Speaker
Call button
Sensor light
Outdoor Phone
417
Chapter 7: Default Setting
Note:
If you reset the handset to the factory default, all of the
settings will return to the factory default.
The pictures will store in this menu, you can save or delete them.
On the upper left of the picture will display the corresponding
Outdoor phone’s number.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose , then press
beneath Select.
3.Press Left or Right to browse pictures.
4.If you want to delete the current pictures, use Left or
Right to choose Delete, press the beneath Del.
The display will show Delete?, Press beneath Yes to
confirm. After a beep the LCD shows the next picture.
5.Press beneath Back to return to the previous menu.
Chapter 6: Snap Show
This function allows you to reset the handset settings to the
factory default.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose , then press
beneath Select.
3.Press Up or Down to choose YES or NO to enable
or disable the function.
4.Press beneath Select to save the settings and return to
the previous menu.
Result: After resetting, the handset will return to standby mode.
Menu Description

5
Indoor Phone
Indoor Charger
Charge pins
Left Soft key Right Soft key
(Manual Snap)
LCD display
Navigation
key
Power/
End key
Accept key
Unlock key
Microphone
Antenna Locking Switch
Speaker
Battery
compartment
cover
Charging pins
Antenna
Chapter 4: Key Tone
Every time you press a key, your handset acknowledges it with a
key tone. You can disable the key tones for a silent use. In certain
error conditions, a warning tone will sound when an incorrect key
is pressed.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose ,then press
beneath Select.
3.Press Up or Down to choose On or Off to enable or
disable the function.
4.Press beneath Select to save the settings and return to the
previous menu.
Chapter 5: Snap Setting
This function allows you to set auto snap or not. If the Auto Snap
is selected On, the handset will take pictures automatically during
the conversation or the monitoring.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose ,then press
beneath Select.
3.Press Up or Down to choose On or Off to enable or
disable the function.
4.Press beneath Select to save the settings and return to the
previous menu.
Menu Description
16
Note:
Also, you can use Snap key to take photos manually.

15
6
The rechargeable Ni-MH batteries (AAA size, 1.2 V, 800 mAh)
come with your phone. Install the batteries before use.
1.
Indoor phone
2.
3. To replace the battery cover, slide the
cover up until it snaps in place.
Reversing the orientation may damage the handset.
The batteries need to be replaced if they do not
recover their full storage capacities after recharging.
When replacing the batteries, always use good
quality Ni-MH re-chargeable batteries. Never use
other batteries or conventional alkaline batteries.
Notes:
Installing Batteries
Insert new batteries as indicated,
matching correct polarity (+,-).
Chapter 2: Volume
Chapter 3: B rightness
This function allows you to adjust the volume (9 levels are
adjustable) during a call.
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose Јthen press
beneath Select.
3.Press Left or Right to select the volume that you like.
Each time you press Left or Right , the handset
sounds with the selected volume.
4.Press beneath Back to save the settings and return to the
previous menu.
Menu Description
This function allows you to adjust the light level (9 levels are
adjustable).
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose Јthen press
beneath Select.
3.Press Left or Right to select the light level that you
like. Each time you press Left or Right , the handset
displays with the selected light level.
4.Press beneath Back to save the settings and return to the
previous menu.
Note:
Also, you can use Left or Right key to adjust the
volume in the standby mode.
Note:
Also, you can use Up or Down key

Outdoor phone
1.Install two C size batteries (not supplied) into the battery
compartment.
2.Drill four screws to fix the battery up.cover
7
! Important Note: Before initial operation, YOU SHOULD
FULLY CHARGE THE HANDSET for
about 15 hours.
To charge the handset, you should place it on the charger.
Charging Handset
14
Chapter 1: Date&Time
1.Press beneath Menu to display the main menu items.
2.Press Up or Down to choose , then press
beneath Select.
3.If you want to set the time, you can press Left or Right
to choose the Hour or the Minute, and press the Up
or Down to adjust.
4.If you want to select the date, you can press Left or
Right to choose the Year or the Month or the Date ,
and press the Up or Down to adjust.
5.Press beneath Back to return to the previous menu.
Menu Description
Notes:
The time format is 24-hour format and the date format is
YY-MM-DD.
The Date&Time must be set beforehand to ensure that the
time displayed on the monitoring pictures are correct.
When you replace batteries, you must set the time and the
date again.
The Date&Time setting order is Hour -ЈMinute -ЈYear -
ЈMonth -ЈDate.

Installation Instruction
Indoor phone
Connect the modular end of the AC
power adapter to the power jack of
the charger, then plug the AC adapter
into a standard AC wall outlet.
Outdoor phone
1.Choose a proper location for the outdoor phone. Be sure to
consider the average height of visitors.
2.Align the rain cover and screws with the holes in the wall.
3.Install the outdoor phone into the rain cover. Please refer to
the picture 3 below.
4.Drill a screw to fix and finish the installation.
To AC wall outlet
Align
1234
8
Away from electrical
appliances, such as a TV,
personal computer or
another cordless phone.
In a HIGH and CENTRAL
location with no
obstructions such as walls
microwave oven and WIFI.
.
Slide the
antenna locking
switch to
unlocking
position the
receiver
antenna will pop
up to receive
better signal.
Notes:
13
In the evening, when someone presses the Call button on the
Outdoor phone, all the LED lights will light on.
Light Sensor
Unlocking
During a conversation, to unlock the door, press on the
Outdoor phone.
Operations
Calling Indoor phone
In standby mode, press the Call button on the Outdoor phone.
The corresponding indoor phone rings, and the image of the
visitor appears on the LCD of the indoor phone.
1. If the master does not want to answer, press to cancel
the ringer and the video.
2. After the master press , the will stopindoor phone
ringing. Then the conversation starts.
3. Press to end the conversation.
Notes:
The conversation can be up to 2 minutes. After 2 minutes,
the line will be disconnected automatically.
The monitor process can be up to 5 minutes. After 5
minutes, the indoor phone will quit monitor mode
automatically.

Diagram
9
1 2
Operations
Monitor
Note:
Both the batteries and the power supply are available, but
not to use them at the same. To support some special
functions, like monitoring, backlight, on the call button and
unlocking, please connect the power supply.
Outdoor Phone
9+ V
2
1
The maximum output
current can be 1A.
DC Power
+9 12 V
-
9+ V
21
For normal
close lock
DC Power
+9 12 V
For normal
open lock
The maximum output
current can be 1A.
Outdoor Phone
Connection Mode 1
Connection Mode 2
Lock
Lock
3.When redisters two or more Outdoor phones, the LCD will display
1#, 2# ...Monitor(Pictures below), and you can press Up or
Down to choose the monitor which you need, then press
beneath Select.
About the monitor function, the LCD wiil automatically display the
corresponding menu according to the registered Outdoor phones.
1. In the standby mode, press beneath Mon.
2. When registers one Outdoor phone. the LCD will display 1#
Outdoor phone.
DC Power for lock
DC Power
for lock
-
-
-

To turn the indoor phone on, press .
To turn the indoor phone off, press .
Turning On / Off
First, press the Call button of the Outdoor phone , then hold the
Register key on the back of the Outdoor phone until the LED
light blinks. Second, press beneath Menu on the Indoor
phone, then select the Register menu. Once a prompt tone is
heard, the Outdoor phone has been registered to the Indoor
phone successfully.
If twice prompts tones is heard the registration, the registration
was unsuccessful, turn off the Indoor phone and remove the
batteries from the Outdoor phone before you hold the Register
key. Then turn on the Indoor phone again, re-install the Outdoor
phone’s batteries and try again.
Register
Register
Button
Call button
10
Operations
11
Operations
Register
The Indoor phone can support up to 4 Outdoor phones.
1. When you have registered one Outdoor phone, the register
interface will display as follow
2. When you have registered 4 Outdoor phones, the register
interface will display as follow