Smake HoopStation EPS User manual

HoopStation EPS
Assembly instructions
HoopStation

1 / 25
Smake |HoopStation | Manual
Requirements
To operate the HoopStation you need the
Mighty Hoop HoopMaster Station and the
5.5“ frame.

2 / 25
Smake |HoopStation | Manual
Preparations

3 / 25
Smake |HoopStation | Manual
1 Base
14× 4×4×

4 / 25
Smake |HoopStation | Manual
2 Base
24× 4× 2×
1
2

5 / 25
Smake |HoopStation | Manual
3 Base
32×
2×
2×
1
2

6 / 25
Smake |HoopStation | Manual
4 HoopMaster Fixture Station
43×8×
1×
1
2

7 / 25
Smake |HoopStation | Manual
5 HoopMaster Fixture Station

8 / 25
Smake |HoopStation | Manual
6 TouchBox
51×
1×
4×

9 / 25
Smake |HoopStation | Manual
7 TouchBox
Optional
Use the adhesive pads to
prevent damage
to the plate.

10 / 25
Smake |EPS Jump | Assembly Manual
8 Media-unit
4x
14× 4×4×

11 / 25
Smake |HoopStation | Manual
9 Connect the PC
1
2
PUSH

12 / 25
Smake |EPS Jump | Software Manual
10 Mount the projector
1
2
3

13 / 25
Smake |HoopStation | Manual
11 Power
1
2

14 / 25
Smake |HoopStation | Manual
11 Connection
If you want to use the barcode system,
updates or the extended function, you
need an Ethernet switch. (page 16)
If you do not want to use these functions you can
connect the TouchBox directly to the HoopStation.
(page 21)
We recommend to run the HoopStation
on the network if possible. Only then up-
dates and new functions are possible.

15 / 25
Smake |HoopStation | Manual
11 Connection
Note
In the new hardware version the network connection
is located in the lower part of the black box, the power
plug is now on the side.
DC Power-Plug
Ethernet / Network

16 / 25
Smake |HoopStation | Manual
12 Connection with switch*
Connect a network cable to the TouchBox and the
switch, shown here in red.
Then connect another network cable between HoopSta-
tion and switch, shown here in blue.
Finally connect the switch to your company network
with a network cable, shown here in yellow.
*the network switch is not included

17 / 25
Smake |HoopStation | Manual
13 Adjust the image focus
Adjust the image focus
Move the focus ring to the left or to the right to adjust
the image focus.

18 / 25
Smake |HoopStation | Manual
13.1 Control panel grid
Control panel grid
The control panel grid guides you through the process
of using the
control panel buttons to launch active options inside
your onscreen display menu.
The control panel grid represents the 8 buttons sur-
rounding the button on the control panel.

19 / 25
Smake |HoopStation | Manual
13.2 Projector Position
Projector Position
Press this button to access the following image
position settings:
Please turn off the „Auto Keystone
Set the „Projector Possition„ to „Front Ceiling“