SMART-AVI USB2PRO User manual

USB 2.0 EXTENDER OVER CAT5
EXTENDS USB 2.0
UP TO 300 FEET
OVER CAT5 CABLE
Quick Start Guide
USB
Signal Type USB 2.0
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power Supply External 100-240 VAC/5VDC2A
Dimensions 3.625” W x 1” H x 3” D
Weight 1.5 lb
Operating Temp. 0 to 40°C (32° to 104° F)
Storage Temp. -20° to 60°C (-4° to 140° F)
Humidity Up to 95% (non-condensing)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
USB2PRO
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
USB-2PTX 1 USB 2.0/1.1 CAT5
Transmitter
USB-2PRX 1 USB 2.0/1.1 CAT5 Receiver
5VDC2A 1 PS5VD2A power supply
Quick Start Guide 1

OVERVIEW
SmartAVI’s USB2Pro extends standard USB (Universal
Serial Bus) 2.0 signals up to 300 feet using a single CAT5
cable. The USB2Pro supports all USB 2.0 high-speed
devices, from keyboards to digital cameras and will operate
on Windows®, Mac and Linux® operating systems. An
integrated four-port hub allows for multiple devices to be
connected to the USB2Pro at once. Additional USB hubs
can be added, increasing the amount of devices that can
be plugged into the USB2Pro.
FEATURES
• Supports all USB 2.0 and1.1 Devices Transparently
(Flash Drives, Printers, Cameras, Scanners, etc.)
• Supports USB 1.1 keyboard and mouse
• Works on Windows, Mac and Linux Operang
Systems
• Integrated Four-Port Hub
• Bus-Powered Local Unit
• Power Adaptor for Remote Unit
• Plug-and-Play
1. Power off all devices.
2. Connect the USB source (computer) to the USB port on the front of the USB2Pro Transmitter.
3. Connect the USB2Pro Transmitter to the USB2Pro Receiver with a CAT5 cable using the front ports.
4. Connect up to 4 USB 2.0 devices to the rear ports on the USB2Pro Receiver.
5. Power on the USB2Pro Transmitter and Receiver by plugging the AC Adapter into the front ports of the unit.
6. Power on the computer and USB devices.
HARDWARE INSTALLATION
FROND AND BACK
VIDEO
USB IN
USB OUT
CAT5/6
USB2PRO-TX USB2PRO-RX
300 FT
USB-2PTX Front Panel USB-2PTX Back Panel
USB-2PRX Front Panel USB-2PRX Back Panel