SMART-AVI DVX-2P Series User manual

DVX-2P
Quick Start Guide
PART NO. QTY DESCRIPTION
DVX-2P-TXS 1 Dual DVI-D, USB, Audio and RS232 over
CAT6 STP Transmitter
DVX-2P-RXS 1 Dual DVI-D, USB, Audio and RS232 over
CAT6 STP Receiver
Power Supply 2 PS5VDC2A
© Copyright 2017 SmartAVI, All Rights Reserved
NOTICE
The information contained in this document
is subject to change without notice. Smart-AVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and fitness for any particular purpose.
Smart-AVI will not be liable for errors contained herein or for
incidental or consequential damages in connection with the
furnishing, performance or use of this material.
No part of this document may be photocopied, reproduced or
translated into another language without prior written consent
from Smart-AVI.
For more information, visit www.smartavi.com.
SmartAVI, Inc. / Twitter: @smartavi
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
http://www.SmartAVI.com
Extend 2 DVI-D, RS232, Stereo Audio
and USB1.1
VIDEO
Video Interface DVI-D
Resolution 1920 x 1200 @ 60 Hz,
Resolution up to 1280 x 1024 min. 75 Hz
Input Interface DVI-D (Single-Link)
Upgradeable Onboard Flash
USB
CAT6 (STP) Maximum Range 220 ft
USB Data Data Rate of 12 Mbps
Compatable with USB version 1.1
USB Connectors USB-TX-DVX-2P, Type A;
USB-TX-DVX-2P, Type B
RS232 & AUDIO
RS232 TX-DB9 Female;
RX-DB9 Male
CAT6 STP CAT6
Protocol Full duplex, transparent to all baud rate
Audio Signal Type Stereo Audio
Bandwidth 15 MHz.0db
Impedance 100 Ohm
Connector 3.5 mini jack
OTHER
Power 110/120 V - 5 VDC - 4 A
Dimensions 10.81” L x3.38”W x 1.06” H
Weight 2 lbs
ORDER INFO
Part No. Description
DVX-2PS Dual DVI-D, USB, Audio and RS232 over CAT6 STP
Extender. Includes: [DVX-2P-TX, DVX-2P-RX, and
2 x PS5VD4A-WLLMNT]
DVX-2P-TXS Dual DVI-D, USB, Audio and RS232 over CAT6 STP
Transmitter. Includes: [DVX-2P-TX and
PS5VD4A-WLLMNT]
DVX-2P-RXS Dual DVI-D, USB, Audio and RS232 over CAT6 STP
Receiver. Includes: [DVX-2P-RX, and
PS5VD4A-WLLMNT]
What’s in the Box?
Technical Specications*
Designed and Manufactured in the USA

Product - Installation Diagram
Connecting the DVI
1. Turn o a computer and a monitor.
2. Connect DVI male to male cable between the computer and the transmitter.
3. Connect a monitor or a projecter to the DVI port on the receiver.
4. Connect the transmitter and the receiver with 4 CAT6 STP cables.
Connecting the USB IN/OUT
1. Connect the transmitter to the host using the A-B USB cable (included with the unit).
2. The A side of the connectorwould go to the computer host and the B side would be connected to the transmitter.
3. Connect the receiver to the peripheral.
4. Connect the CAT6 STP Cable.
Note: The receiver provides remote power up to 500 mA to the connected peripherals. This power comes
from the host computer and is passed by the transmitter to the receiver. In some applications, and external
power supply is required. SmartAVIcan provide a power supply for such for such cases with the receiver and
transmitter units.
Connecting the AUDIO and RS232
1. Connect an RS232 cable and/or audio cable to the source unit.
2. Connect the audio using 3.5 mm cable at the transmitter.
3. Connect the speaker/s at the receiver.
4. Connect the last CAT6 STP cable.
Application
• Film and Music Industry: perfect for recording
studios and editing stations that need to be
isolated.
• Medical: in an environment where display
monitors and workstations cannot be in close
proximity of various pieces of medical equipment.
• Data Centers and Server Rooms: allows for users to
access CPUs from a remote work space.
DVX-2P-TX Back
DVX-2P-RX Back
DVX-2P-TX Front
DVX-2P-RX Front