SMART-AVI USB2CX User manual

USB 2.0 Extender over CAT5
EXTENDS USB 2.0
UP TO 330 FEET
OVER CAT5 CABLE
Quick Start Guide
USB
Signal Type USB 2.0
Input Interface (TX) (1) USB Type B (Female)
Output Interface (RX) (4) USB Type A (Female)
OTHER
Power External 100-240 VAC/5VDC3A
Dimensions 4.3” W x 1.1” H x 2.5” D
Weight 1.5 lb
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95% (non-condensing)
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
(888)-994-7427, (702)-800-0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
USB2CX
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
USB2CX-TX 1 USB 2.0 over CAT5 Transmitter
USB2CX-RX 1 USB 2.0 over CAT5 Receiver
PS5VD3A 2 5V 3A Power Supply
Quick Start
Guide 1

OVEVIEW
SmartAVI’s USB2СX extends standard USB (Universal Serial
Bus) 2.0 signals up to 330 feet (100 meters) using a single
CAT5 cable. The USB2СX supports all USB 2.0 high-speed
devices, from keyboards to digital cameras, and will operate
on Windows®, Mac® and Linux® operating systems. An
integrated four-port hub allows for multiple devices to be
connected to the USB2СX at once. Additional USB hubs can
be added, increasing the number of devices that can be
plugged into the USB2СX.
FEATURES
• Supports All USB 2.0 and 1.1 Devices Transparently
(Flash Drives, Printers, Cameras, Scanners, etc.)
• Supports USB 1.1 Keyboard and Mouse
• Works on Windows, Mac and Linux Operang
Systems
• Integrated Four-Port Hub
• Bus-Powered Local Unit
• Power Adapter for Remote Unit
• Plug-and-Play
USB2CX-TX Transmitter
1. Power off all devices.
2. Connect the KM source device (computer) to the USB2CX-TX with a USB cable using the USB-B input port.
3. Install a CAT5 cable into the USB2CX-TX uplink port.
4. Connect a power supply to the USB2CX-TX.
USB2CX-RX Receiver
1. Install the CAT5 cable into the USB2CX-RX uplink port.
2. Connect the USB2CX-RX to the desired peripherals using the USB-A output ports.
3. Connect a power supply to the USB2CX-RX.
4. Power on all devices.
HARDWARE INSTALLATION
USB2CX-TX Front panel
USB2CX-RX Front panel
USB2CX-RX Back panel
USB2CX-TX Back panel
< • • • >
USB2СX
Receiver
< • • • >
USB2СX
Transmitter
Up to 330 feet
USB IN
USB OUT
CAT5