SMART-AVI RDU-8P User manual

2-Port DVI-D and USB 1.1
Local/Remote Switch
with Integrated Extender
2-PORT DVI-D AND USB 1.1
LOCAL/REMOTE SWITCH -
EXTENDS UP TO 275 FEET
OVER STP CABLE
Quick Start Guide
VIDEO
Format DVI-D Single Line
Maximum Pixel Clock 165 MHz
Input Interface (2) DVI-D 29-pin female
Output Interface (1) DVI-D 29-pin female
Resolution Up to 1920 x 1200 @60Hz
DDC 5 volts p-p (TTL)
Input Equalization Automatic
Input Cable Length Up to 20 ft
Output Cable Length Up to 20 ft
USB
Signal Type USB 2.0, 1.1, and 1.0
w/ internal hub
Input Interface (2) USB Type B
Output Interface (2) USB 1.1 Type A for KVM Devices;
(2) USB 2.0 Type A Transparent
OTHER
Power External 100-240 VAC/ 5VDC2A
Dimensions 9 in W x 1 in H x 3 in D
Weight 1 lb
Approvals UL, CE, ROHS Compliant
Operating Temp. 0-55 °C (32-131°F)
Storage Temp. -20-85 °C (-4-185 °F)
Humidity Up to 95%
Emulation Keyboard and Mouse
NOTICE
The information contained in this document is
subject to change without notice. SmartAVI makes
no warranty of any kind with regard to this material,
including but not limited to, implied warranties of
merchantability and tness for particular purpose.
SmartAVI will not be liable for errors contained
herein or for incidental or consequential damages in
connection with the furnishing, performance or use of
this material.
No part of this document may be photocopied,
reproduced, or translated into another language
without prior written consent from SmartAVI
Technologies, Inc.
800.AVI.2131, 702.800.0005
2455 W Cheyenne Ave, Suite 112
North Las Vegas, NV 89032
SmartAVI.com
TECHNICAL SPECIFICATION
RDU-8P
WHAT’S IN THE BOX
PART NO. Q-TY DESCRIPTION
RDU-2P-TX-S 1 2-Port DVI-D and USB 1.1
Transmitter
RDU-2P-RX-S 1 2-Port DVI-D and USB 1.1
Receiver
PS5VDC4A 2 PS5VD4A Power Supply
Quick Start Guide 1

OVERVIEW
The RDU-2P is a perfect solution for sharing the output of
two computers from a remote location. It extends DVI-D
and USB 1.1 from two computers to a remote location up
to 275 feet away. Both the transmitter and receiver have an
integrated remote switch, allowing you to switch between
the two computers locally or from the remote location. With
its DDC learning capabilty, the RDU-2P is fully plug-and-play
FEATURES
• DDC from internal table for Mac/PC
• DDC learning from display
• Switches inputs locally and from the remote unit
• Supports Mac, PC, and Linux DVI
• Supports High Resolution 1920x1200 60Hz WUXGA
• Uses universal DVI Single Link connectors
• Zero pixel loss with TMDS signal correction
• Supports all USB 1.1 Devices Transparently
(Flash Drives, Printers, Cameras, Scanners, etc.)
• Supports USB 1.1 keyboard and mouse
• Front panel tactile port switch on both the transmitter
and receiver
1. Power off all devices.
2. Connect two DVI-D sources to the DVI-D ports of the RDU-2PTX labeled IN1 and IN2
3. Connect two USB sources to the USB ports of the the RDU-2PTX labeled IN1 and IN2
4. Connect the RDU-2PTX to the the RDU-2PRX with two STP (Sheilded Twisted Pair) cables using the rear ports labeled DVI
and USB
5. 5. Connect a DVI monitor to the OUT port on the rear of the RDU-2PRX
6. 6. Connect up to 4 USB 1.1 devices to the USB IN ports on the RDU-2PRX
7. Connect the power supply to the POWER ports on the RDU-2PTX and RDU-2PRX
8. Power on the RDU-2P using the front switch
9. Power on the computers, displays and USB 1.1 devices
RDU-2P-TX RDU-2P-RX
HARDWARE INSTALLATION