SMC Networks PF3AmH Series User manual

Improved resistance to
moisture and foreign matter
Modular type
3-Screen Display
Digital
Flow Monitor
Compatible
Flow ratio*2100:1
*2 The flow ratio is 20 : 1 for the existing model (PF2A7mH/Large flow type).
*1 For the PF3AmmH-L
Allows for the monitoring of remote lines p. 7
The bypass construction reduces sensor
accuracy deterioration and damage. p. 1
PF3A8mH-L Series
The measured value and the device status can
be figured out easily via the process data.
p. 3
*1
p. 6
Series Output type Rated flow range [L/min]
Body ported type
PF3A703/706/712H(-L)
Series
Switch output
Analog output
IO-Link
Modular type
PF3A701/702H(-L)
Series
Switch output
Analog output
IO-Link
Modular type
With pressure/
temperature sensor
PF3A801/802H-L Series
Switch output
IO-Link
A wide range of flow measurement is possible with 1 product.
IP65
3-Color Display
Applicable fluid Air, N2
Can be connected to the air combination
p. 5
Simultaneous
measurement of the
(accumulated) flow
rate, pressure, and
temperature is
possible.
Digital Flow Switch with Pressure/
Temperature Sensor
4-Screen Display
30 3000 L type
1000 L type
1000 L type
2000 L type
2000 L type
3000
6000
12000
10
10
1000
1000
2000
2000
20
20
60
6000 L type
12000 L type
120
Digital Flow Switch
for Large Flow
CAT.ES100-117D
PF3AmH(-L) Series
RoHS
A

Display rotates 90°and can be reversed.
The display can be rotated in increments of 90°
according to the installation. The display can be
reversed for easy operation.
Installation
Example
OUT IN
OUT IN
Normal
90°rotation
Reversed display ON
(Can be set with the “Reversible display mode”)
OUT IN
Normal
90°rotation
Reversed display OFF
3-color/2-screen display *2-screen display: 2-row display of main screen and sub screen
Instantaneous flow rate Green Red (Upper Main display)
Easy operation,
improved visibility
Clockwise
90°
MAccumulated value MPeak/Bottom value MLine name
Set value
Orange
(Lower Sub display)
The lower/sub display can be changed by pressing the up/down buttons.
*Either “Input of line name” or “Display OFF” can be added via the function settings.
Upper Main display: Green At set point Upper Main display: Red At set point
3-Color Display Digital Flow Switch for Large Flow PF3AH(-L) Series
Through bore construction
*1
•Pressure loss:
75% reduction*2
(20 kPa /5 kPa)
•Maintenance-free
fluid passage
INOUT
Improved resistance to
moisture and foreign matter
The bypass construction reduces the moist air or foreign matter in contact
with the sensor, reducing sensor accuracy deterioration and damage.
Air containing moisture
or foreign matter
Sensor unit Bypass construction
IN OUT
*The figure shows the PF3A703/6/12H(-L).
*1 Excludes the modular type
*2 Compared with the existing model (PF2A7H/
Large flow type)
1

Flow control of equipment, main line,
and branch line
Remote control is possible
with accumulated pulse.
Multi-counter CEU5
sFor details, refer to the Web Catalog.
3-Color Display Digital Flow Switch for Large Flow PF3AH(-L) Series
Application
Select a digital flow switch to increase energy savings!
Functions pp. 37 to 39
For details, refer to the SMC website.
https://www.smcworld.com
SMC Model Selection Software Search
Energy Saving Program
Grease-free
Smallest settable increment: 2L/min
*For the PF3A703H
*5 L/min for the existing model (PF2A703H/Large flow type)
¡Output operation
¡Simple setting mode
¡Display color
¡Reference condition
¡Response time (Digital filter)
¡FUNC output switching function
(Analog output ⇔External input)
¡Selectable analog output function
¡External input function
¡Forced output function
¡Accumulated value hold
¡Peak/Bottom value display
¡Display OFF mode
¡Setting of a security code
¡Key-lock function
¡Reset to the default settings
¡Reversible display mode
¡Zero cut-off function
¡Delay time setting
¡
Selection of the display on the sub
screen
¡Analog output free range function
¡Error display function
¡Zero-clear function
¡Display fine adjustment function
¡Measurement display setting
Flow control is necessary for promoting energy saving
in any application. Saving energy starts from numerical
control of the flow consumption of equipment and lines
and clarification of the purpose and effect.
¡ Digital display allows visualization.
¡ 3-color/2-screen display, Improved
visibility
¡ Remote control is possible with
accumulated pulse.
2

PLC PC
Supports the IO-Link communication protocol
IO-Link Compatible PF3AmmH-mm-Lm-mm
IO-Link is an open communication inter-
face technology between the sensor/actu-
ator and the I/O terminal that is an interna-
tional standard: IEC 61131-9.
IO-Link Master
Fieldbus
Device settings can be
set by the master.
· Threshold value
· Operation mode,
etc.
Read the device data.
· Switch ON/OFF signal and analog value
· Device information:
Manufacturer, Product part number, Serial number, etc.
· Normal or abnormal device status
· Cable breakage
Configuration File (IODD File*1)
· Manufacturer · Product part no. · Set value
*1 IODD File:
IODD is an abbreviation of IO Device
Description. This file is necessary for setting
the device and connecting it to a master. Save
the IODD file on the PC to be used to set the
device prior to use.
IO-Link Compatible Device:
Digital Flow Switch for Large Air Flow
PF3A7mH-L Series
IO-Link Compatible Device:
Digital Flow Switch for Large Air Flow
PF3A8mH-L Series
p. 15
3-Color Display Digital Flow Switch for Large Flow PF3AmH(-L) Series
Display function
Operation and Display
Communication
with master
IO-Link status
indicator light Status Screen
display*2Description
Ye s
*1
IO-Link
mode
Normal
Operate Normal communication status (readout of measured value)
*1
(Flashing)
Start up
At the start of communication
Preoperate
Abnormal
Version does
not match
The IO-Link version does not match that of the master.
*The applicable IO-Link version is 1.1.
No
Communication
disconnection Normal communication was not received for 1 s or longer.
OFF SIO mode General switch output
*1 In IO-Link mode, the IO-Link indicator is ON or flashing. *2 When the lower line (sub screen) is set to mode display (Upper line for the PF3A8mH-L)
*“ModE LoC” is displayed when the data storage lock is enabled. (Except for when the version does not match or when in SIO mode)
Displays the output communication
status and indicates the presence of
communication data
SIO mode Start-up mode Preoperate mode Operate mode
3

For the PF3A7mH-L
For the PF3A8mH-L
Implement diagnostic bits in the process data.
Diagnosis items
· Over current error
· Rated flow error
· Accumulated flow error
· Flow sensor failure
· Temperature sensor failure
· Internal product malfunction
Diagnosis items
· Rated flow error
· Above/Below the rated pressure range
· Above/Below the rated temperature range
·
Error (Over current, Outside of zero-clear range, Version does not match)
· System error (Flow/Temperature sensor failure, Internal malfunction)
Process Data
Bit offset Item Note
0 OUT1 output 0: OFF 1: ON
1 OUT2 output 0: OFF 1: ON
8 Flow rate diagnosis 0: OFF 1: ON
14 Fixed output 0: OFF 1: ON
15 Error (Failure) 0: OFF 1: ON
16 to 31
Measured flow rate value Signed 16 bit
Process Data
Bit offset Item Note
0
Accumulated flow SW1 0: OFF 1: ON
1
Accumulated flow SW2 0: OFF 1: ON
2 Flow rate SW1 0: OFF 1: ON
3 Flow rate SW2 0: OFF 1: ON
4 Temperature SW1 0: OFF 1: ON
5 Temperature SW2 0: OFF 1: ON
6 Pressure SW1 0: OFF 1: ON
7 Pressure SW2 0: OFF 1: ON
8 Flow rate unit 0: L 1: ft3
9 Flow rate criteria 0: STD 1: nor
10 Flow rate diagnosis 0: Normal
1: HHH
Bit offset Item Note
11
Temperature diagnosis 0: Normal 1: HHH/LLL
12
Pressure diagnosis 0: Normal 1: HHH/LLL
13 Fixed output
0: Normal output 1: Fixed output
14 Error 0: Normal 1: Abnormal
15 System error 0: Normal 1: Abnormal
16 to 31
Measured pressure value Signed 16 bit
32 to 47
Measured temperature value Signed 16 bit
48 to 63
Measured flow rate value Signed 16 bit
64 to 79
Accumulated flow rate lower limit
Unsigned 32 bit
80 to 95
Accumulated flow rate upper limit
Bit offset 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Item Measured flow rate value (PD)
Bit offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Item Error
(Failure)
Fixed output Reservation Flow rate diagnosis Reservation OUT2 OUT1
Switch output
Bit offset 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80
Item Accumulated flow rate upper limit (PD)
Bit offset 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64
Item Accumulated flow rate lower limit (PD)
Bit offset 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48
Item Measured flow rate value (PD)
Bit offset 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32
Item Measured temperature value (PD)
Bit offset 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
Item Measured pressure value (PD)
Bit offset 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Item
System error Error Fixed output Pressure diagnosis Temperature diagnosis Flow rate diagnosis Flow rate criteria Flow rate unit Pressure 2 Pressure 1 Temperature 2 Temperature 1 Flow rate 2 Flow rate 1 Accumulated flow 2 Accumulated flow 1
The diagnostic bit in the cyclic process data makes it easy to find problems with the equipment.
It is possible to find problems with the equipment in real time using the cyclic (periodic)
data and to monitor such problems in detail with the noncyclic (aperiodic) data.
Application Example
M/C
M/C
M/C
Flow control for each branch line
Can be used for the flow control, etc.,
of the main line and branch lines
The instantaneous flow, set value, and
accumulated value can be checked at
the same time.
Main line flow control
3-Color Display Digital Flow Switch for Large Flow PF3AmH(-L) Series
4

IN
Spacer
with bracket
Piping adapter
Bolt
Can be connected to the air combination
Air Combination Connection Examples
3-Color Display Modular Type Digital Flow Switch
PF3A701H/702H(-L)Series
A right to left (-R)
flow direction is
also available.
90°rotation
For the AC30B-D + PF3A701H
The flow switch can be installed/removed without removing the piping.
Reduced maintenance time for inspection, cleaning, replacement, etc.
For the AW30-D + PF3A701H
AC30-D AC40-D Flow range
1000 L/min
2000 L/min
Series
PF3A701H(-L)
PF3A702H(-L)
Products do not come assembled.
They should be ordered separately and assembled by the customer.
1000 L/min
(PF3A701H)
2000 L/min
(PF3A702H)
Piping adapter
Air combination
Spacer with bracket
Piping adapter
Spacer with bracket
Air filter Regulator Flow switch Flow switchFilter
regulator
Unit with F.R.L is available with the simple special ordering system.
The lead time is almost the same as the standard product.
Simple Specials System
Please contact your local sales representative for more details.
Remove the steel pipe
from the flow switch.
Loosen the bracket-
retaining ring.
pp. 17, 19
When the PF3A703H is
used with steel pipes
Loosen the bolts.
(4 locations)
5

Can be connected to the air combination
4-Screen Display
Modular Type Digital Flow Switch with Pressure/Temperature Sensor
PF3A801H/802H-L Series
M3-color/4-screen display
Simultaneous measurement of the instantaneous
flow rate, accumulated flow rate, pressure, and
temperature
MPressure sensor
Rated pressure range: 0 to 1 MPa
MTemperature sensor
Rated temperature range: 0 to 50°C
MSpace-saving design, Reduced labor
AC30-D AC40-D Flow range Pressure
Temperature
1000 L/min
1 MPa 50°C
2000 L/min
Series
PF3A801H-L
PF3A802H-L 1000 L/min
(PF3A801H)
2000 L/min
(PF3A802H)
Both the flow rate and pressure can be measured with 1 product.
The installation of a digital pressure switch and a cross spacer is not necessary, thus reducing
the face-to-face and depth dimensions. In addition, only 1 cable is required for wiring. This
reduces the required installation space, piping, and wiring work.
280 mm 44 mm
9mm
245 mm
2 wires
Reduced
by 35 mm
Face-to-face dimension
reduced by 35 mm
Depth dimension
reduced by 35 mm
Reduced wiring labor
(2 wires R1 wire)
Pressure
Temperature
Instantaneous flow rate
Accumulated flow rate
1wire
p. 21
6

The sub screen (label) shows the item
to be set.
When the S button is pressed and the set value (P_1) is being displayed,
the set value (threshold value) can be set. When the S button is pressed and
the hysteresis (H_1) is being displayed, the hysteresis value can be set.
1 2 3
*Either “Input of line name” or “Display OFF” can be added via the function settings.
The sub screen can be switched by pressing the up/down buttons.
Label (Display item)
Sub screen/Left side
Visualization of settings
Allows for the monitoring of remote lines
Easy screen switching
Simple 3-step setting
With a snap shot function for set value reading
Push Push Push Push
Measured value (Current flow value)
Main screen
Set value (Threshold value)
Sub screen/Right side
3-Screen Display Digital Flow Monitor
PFG300 Series p. 31
Centralized flow control
PFG300 PFG300
PFG300
PF3A7H
PFMB
PFG300
PFMC
PFG300
The flow rate of a flow
switch installed in a
distant location can be
confirmed!
For main line
Existing model
PFG300
NewNew
Always
displayed on
one screen
Switches
between displays
Normal output/Lo side Set value (Threshold value) Normal output/Hi side Set value (Threshold value)
Mode Examples
Hysteresis mode
Window comparator mode
Normal output Set value (Threshold value) Reversed output Set value (Threshold value) Hysteresis Set hysteresis value
Reversed output/Lo side Set value (Threshold value) Reversed output/Hi side Set value (Threshold value)
It is possible to
change the settings
while checking the
measured value.
Accumulated flow Set value (Threshold value) Hysteresis value Bottom value Peak value
Setting completed
Pressing the and buttons simultaneously
for a minimum of 1 second will make the set value
(threshold value) the same as the current flow value.
Snap shot
function
Setting completed
Setting start
Release the buttons after
“---” is displayed on the
right side sub screen.
Use the or
button to adjust to the
set value.
7

Voltage input
1 V 5 V
Current input 4 mA 20 mA
Display
B
A
Voltage input
Display
1000
0
1 V 5 V
Bracket A
Bracket B
Panel mounting
Copy function
The set values of the
monitor can be copied.
Security code
The key locking function
keeps unauthorized
persons from tampering
with the settings.
Copy source
1 unit
Copy destination
10 units
2 units
Copy
6 mm shorter
25 mm
Compact: Max. 6 mm shorter
 Lightweight: Max. 5 g lighter (30 g / 25 g)
The bracket configuration allows for mounting in four orientations.
Convenient functions
Mounting
Compact & Lightweight
31 mm
Functions pp. 40 to 42
The number of
stock items can
be reduced.
The displayed value to the sensor input can be set as required.
(Voltage input: 1 to 5 V/Current input: 4 to 20 mA)
Pressure switch/Flow switch can be displayed.
A is displayed for 1 V (or 4 mA). B is displayed for 5 V (or 20 mA).
The range can be set as required.
Pressure Sensor for General Fluids/PSE570
NPN/PNP switch function Input range selection (for Pressure/Flow rate)
Select
NPN or PNP
NPN PNP
Analog output of 0 to 10 V is
also available.
Voltage
output
1 to 5 V Switchable
0 to 10 V
Current output 4 to 20 mA Fixed
Set A and B to the values shown
in the table above.
A B
PSE570 0 1000
PSE573 –100 100
PSE574 0 500
Power saving mode
Power consumption is reduced by turning off the monitor.
Current consumption*1Reduction rate*2
25 mA or less Approx. 50% reduction
*1 During normal operation *2 In power saving mode
External input function
The accumulated value, peak value, and bottom value can be reset remotely.
PFG300
PFM300
¡ Selection of the display on the sub screen
¡Analog output free range function
¡Error display function
¡Copy function
¡Selection of power saving mode
¡Output operation
¡Simple setting mode
¡Display color
¡Delay time setting
¡Digital filter setting
¡FUNC output switching function
¡Selectable analog output function
¡External input function
¡Forced output function
¡Accumulated value hold
¡Peak/Bottom value display
¡Setting of a security code
¡Key-lock function
¡Reset to the default settings
¡Display with zero cut-off setting
Mountable side by side both vertically and horizontally
One opening!
· Reduced panel fitting labor
· Space saving
Mounting
example
Mounting
example
8
Digital Flow Monitor PFG300 Series
3-Screen Display
A

Flow Switch Flow Rate Variations
Series
1 2 0.20.1 0.5 5 10 20 25 50 100 150 200 300 500 600 1000 2000 3000 6000 12000
Rated flow range [L/min]
Smallest
settable
increment
Detection
method
Applicable
fluid
Compatibility with the
PFG300 digital flow monitor
Series Detection
method
Applicable
fluid 1 2 3−3 −2 −1 −0.5 0 0.5
Rated flow range [L/min]
0.3
25
0.1
10
Thermal
type
(MEMS)
Dry air
N2
Ar
CO2
Dry air
N2
0.1 L/min
0.5 L/min
1 L/min
2 L/min
5 L/min
2 L/min
5 L/min
10 L/min
1 L/min
2 L/min
Thermal
type
(MEMS)
Bypass
flow type
Thermal
type
(Thermistor)
Air
N2
—
—
Thermal
type
(Platinum
sensor)
Bypass
flow type
Air
N2
0.1 L/min
0.01 L/min
0.001
L/min
1 L/min
1 L/min
PF2M7(-L)
PFG300
PF2A
PF3AH(-L)
PFMB
1 10
10 1000
20 2000
5 500
1 100
2 200
0.5 50
0.05
5
0.02
2
0.01
10 100
5 50
20 200
50 500
120
12000
30 3000
20 2000
10 1000
60 6000
PFG300
pp. 17, 19
pp. 13, 15
p. 31
Thermal type
(MEMS)
Dry air
N2
PFMV
−1 1
−0.5 0.5
0 1
3
0 3
0 0.5
1
Modular type
Modular type
Body ported type
Body ported type
Body ported type
Modular
type
Body ported type
−3
Dry air
N2
Thermal
type
(MEMS)
Bypass
flow type
1 L/min
PFG300
PF2MC7(-L)
10 1000
20 2000
5 500
3-Color Display Digital Flow Switch for Large Flow PF3AH(-L) Series
9
A