Smooth Fitness 5.65i User manual

USER＇S MANUAL
5.65i MOTORIZED TREADMILL
USER WEIGHT LIMITATION: 300lbs (136kgs).
SERIAL NUMBER (found on frame):

2 5.65i TREADMILL
PRECAUTIONS
For future service or related questions:
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Precautions:
WARNING:To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important
precautions and information before operating the treadmill. It is the responsibility of the owner to ensure that all users of this
treadmill are adequately informed of all warnings and precautions.
•Use the treadmill only as described in this manual. Do not use attachments not recommended by the manufacturer.
•Place on a level surface, with 6 feet (2 m) of clearance behind it. Do not place the treadmill on any surface that blocks air
openings. To protect the floor or carpet from damage, place a mat under the treadmill.
•When choosing a location for the treadmill be sure that the location and position permit access to a plug.
•Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near
water.
•DANGER- To reduce the risk of electrical shock always unplug the appliance immediately after use.
•Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electrical shock, or injury.
•Appliance should never be left unattended when plugged in. Unplug from the outlet when not in use, and before putting on
or taking off parts.
•Close supervision is required when this appliance is used by, on or near children invalids or disabled persons.
•Do not use this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged,
or dropped in water. Call your local service center for examination and repair prior to use.
•Do not carry this appliance by the power cord or use the cord as a handle.
•Keep the cord away from heated surfaces.
•Never operate the appliance witht the air openings blocked. Keep air openings free from lint, hair and the like.
•Never drop or insert any objects into any openings.
•To disconnect, turn all controls to the off position then remove the plug from the outlet.
•Connect this appliance to a properly grounded outlet only. See power requirements.
•Do not operate the treadmill where aerosol products are used or where oxygen is being administered.
•Keep children under the age of 12 and pets away from the treadmill at all times.
•The treadmill should not be used by persons weighing more than 300LBS (136 Kgs).
•Never allow more than one person on the treadmill at a time. Wear appropriate exercise clothing when using the treadmill.
Do not wear loose clothing that could become caught in the treadmill. Athletic support clothes are recommended for both
men and women. Always wear athletic shoes. Never use the treadmill with bare feet, wearing only stockings, or in
sandals.
•When connecting the power cord, plug the power cord into a grounded circuit. No other appliance should be on the same
circuit.
•Always straddle the belt and allow it to start moving before stepping onto the belt.
•Always examine your treadmill before using to ensure all parts are in working order.
•Allow the belt to fully stop before dismounting.
•Never insert any object or body parts into any opening.
•Follow the safety information in regards to plugging in your treadmill.
•Keep the power cord away from the incline wheels and do not run the power cord underneath your treadmill. Do not
operate the treadmill with a damaged or frayed power cord.
•Always unplug the treadmill before cleaning and/or servicing. Service to your treadmill should only be performed by an
authorized service representative, unless authorized and/or instructed by the manufacturer. Failure to follow these
instructions will void the treadmill warranty.
•Never leave the treadmill unattended while it is running.
•Use “safety key” when operating the treadmill and make sure the “safety key” is clipped to the users clothing.
•Remove the “safety key” and store it in a safe place when the treadmill is not in use. Keep the “safety key” away from
children.
SAVE THESE INSTRUCTIONS.

www.smoothfitness.com 3
PRECAUTIONS
Pour réparations futures ou questions connexes :
Please staple your receipt and/or write in the name and phone number of the retail store where you purchased your treadmill.
Name: ______________________________ Phone Number: ___________________ Receipt: ______________________
Précautions :
AVERTISSEMENT : Pour réduire les risques de brûlures, d’incendie, de choc électrique ou de blessures aux personnes, lire les
précautions importantes et l’information suivantes avant de se servir du tapis roulant. Il revient au propriétaire de s’assurer que tous
les utilisateurs de ce tapis ont bien été informés de tous les avertissements et précautions.
Utiliser le tapis seulement comme il est décrit dans ce manuel. Ne pas utiliser d'accessoires non recommandés
par le fabricant
oLe placer sur une surface plane, en laissant 2 m (6 pi) d’espace libre en arrière. Ne pas placer le tapis roulant sur une
surface qui bloque les ouvertures d’air.
oPour protéger le plancher ou un tapis de dommages, placer un petit tapis sous le tapis roulant.
oChoisir pour le tapis roulant un emplacement et une position qui permettent d’avoir accès à une prise murale.
oDANGER-Afin de réduire le risque de choc électrique débranchez toujours l'appareil immédiatement après utilisation.
oNe pas faire fonctionner sous une couverture ou un oreiller. Une chaleur excessive peut se produire et provoquer un
incendie, un choc électrique ou de blessure.
oL'appareil ne doit jamais être laissé sans surveillance lorsqu'il est branché po débrancher de la prise lorsqu'il n'est pas
utilisé, et avant de mettre ou d'enlever des pièces.
oUne surveillance étroite est nécessaire lorsque cet appareil est utilisé par, sur ou près des invalides enfants ou de
personnes handicapées.
oNe pas utiliser cet appareil si le cordon ou la fiche, si elle ne fonctionne pas correctement, s'il a été échappé ou
endommagé ou tombé dans l'eau. Appelez votre centre de service local pour l'examen et la réparation avant de l'utiliser.
oNe transportez pas cet appareil par le cordon d'alimentation ou d'utiliser le cordon comme une poignée.
oGardez le cordon loin des surfaces chauffées.
oNe jamais faire fonctionner l'appareil avec les ouvertures d'air bloqué. Maintenir les ouvertures d'air libre de peluche, de
cheveux, etc.
oNe jamais laisser tomber ou insérer des objets dans les ouvertures.
oPour débrancher, mettre toutes les commandes à la position hors tension, puis retirez la fiche de la prise.
oBranchez cet appareil à une prise de terre seulement. Voir les exigences de puissance
oGarder le tapis roulant à l’intérieur, à un endroit sans humidité ni poussière. Ne pas mettre le tapis roulant dans un garage,
sur une terrasse couverte ou près de l’eau.
oNe pas faire fonctionner le tapis roulant pendant la vaporisation de produits aérosol ou l’administration d’oxygène.
oNe pas laisser les enfants de moins de 12 ans et les animaux s’approcher du tapis roulant.
oLe tapis roulant ne doit pas être utilisé par des personnes pesant plus de 136 kg (300 lb).
oIl ne doit jamais y avoir plus d’une personne sur le tapis à la fois. Porter des vêtements d’exercice appropriés pour utiliser
le tapis roulant. Ne pas porter de vêtements lâches qui pourraient être pris dans le tapis roulant. Les vêtements de soutien
athlétiques sont recommandés tant pour les hommes que pour les femmes. Porter toujours des chaussures d’athlétisme.
Ne pas être pieds nus, ou porter seulement des chaussettes ou des sandales lors de l’utilisation du tapis roulant.
oBrancher le cordon d’alimentation dans un circuit avec mise à la terre. Aucun autre appareil ne doit être sur le même
circuit.
oToujours enjamber le tapis et le laisser commencer à rouler avant de monter dessus.
oToujours examiner votre tapis roulant avant de l’utiliser pour s’assurer que toutes les pièces fonctionnent correctement.
oLaisser le tapis s’arrêter complètement avant de descendre.
oNe jamais insérer d’objets ou de parties du corps dans une ouverture.
oSuivre les directives de sécurité en ce qui concerne le branchement de votre tapis roulant.
oGarder le cordon d’alimentation éloigné des roues inclinées et ne pas faire passer le cordon d’alimentation sous votre
tapis roulant. Ne pas faire fonctionner le tapis roulant si le cordon d’alimentation est endommagé ou effiloché.
oDébrancher toujours le tapis roulant avant de le nettoyer ou de le réparer.
oToute réparation au tapis doit être effectuée par un réparateur agréé, à moins d’autorisation ou de directives contraires du
fabricant. Le non-respect de ces instructions annulera la garantie du tapis roulant.
oNe jamais laisser le tapis roulant sans surveillance lorsque la clé de sécurité est insérée.
oUtiliser la « clé de sécurité » pour faire fonctionner le tapis roulant et s’assurer qu’elle est accrochée aux vêtements des
utilisateurs.
oRetirer la « clé de sécurité » et la ranger dans un endroit sûr lorsque le tapis roulant n’est pas en fonction. Garder la « clé
de sécurité » hors de la portée des enfants

4 5.65i TREADMILL
POWER REQUIREMENTS
Power Requirements:
IMPROPER CONNECTION OF THE EQUIPMENT GROUNDING CONNECTOR CAN RESULT IN THE RISK OF AN ELECTRIC
SHOCK. CHECK WITH A QUALIFIED ELECTRICIAN OR SERVICE MAN IF YOU ARE IN DOUBT AS TO WHETHER THE
PRODUCT IS PROPERLY GROUNDED. DO NOT MODIFY THE PLUG PROVIDED WITH THE PRODUCT, IF IT WILL NOT FIT
THE OUTLET; HAVE A PROPER OUTLET INSTALLED BY A QUALIFIED ELECTRICIAN.
This treadmill can be seriously damaged by sudden voltage changes in your home’s electrical power. Voltage spikes, surges and
noise interference can result from weather conditions or from other appliances being turned on or off. To reduce the possibility of
treadmill damage, always use a surge protector (not included) with your treadmill.
Surge protectors can be purchased at most hardware stores. The manufacturer recommends a single outlet surge protector with a
UL 1449 rating as a Transient Voltage Surge Suppressor (TVSS) with a UL suppressed voltage rating of 400V or less and an
electrical rating 110VAC, 15 amps.
This treadmill must be grounded to reduce the risk of electrical shock. Grounding provides a path of least resistance for electric
current, should the treadmill malfunction. This treadmill is equipped with an electrical cord that has an equipment-grounding
conductor and a grounding plug. Always plug the power cord into a surge protector, and plug the surge protector into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
This product is for use on a nominal 110-volt circuit, and has a grounding plug that looks like the plug illustrated in the drawing
below.
GFCI / AFCI outlets and GFCI / AFCI Circuit Breakers are NOT recommended for use on this product. GFCI outlets and GFCI
Circuit Breakers may cause this equipment to function improperly.

www.smoothfitness.com 5
POWER REQUIREMENTS
Alimentation :
UN MAUVAIS BRANCHEMENT DU CONNECTEUR DE MISE À LA TERRE DE L’ÉQUIPEMENT POURRAIT PROVOQUER UN
CHOC ÉLECTRIQUE. EN CAS DE DOUTE, CONSULTER UN ÉLECTRICIEN OU UN RÉPARATEUR QUALIFIÉ POUR SAVOIR
SI LE PRODUIT EST CORRECTEMENT MIS À LA TERRE. NE PAS MODIFIER LA FICHE FOURNIE AVEC LE PRODUIT. SI
ELLE N’ENTRE PAS DANS LA PRISE, FAIRE INSTALLER UNE PRISE APPROPRIÉE PAR UN ÉLECTRICIEN
PROFESSIONNEL.
Ce tapis roulant pourrait être gravement endommagé en cas de changement soudain de tension dans votre alimentation électrique.
Les conditions météorologiques ou la mise sous tension ou hors tension d’autres appareils électriques peuvent provoquer des
pointes de tension, des surtensions ou un brouillage. Pour réduire la possibilité que le tapis soit endommagé, toujours utiliser un
limiteur de surtension (non inclus) avec votre tapis roulant.
Il est possible d’acheter des limiteurs de surtension dans la plupart des quincailleries. Le fabricant recommande un limiteur de
surtension UL 1449 à prise unique comme suppresseur de tension transitoire (TVSS) ayant un taux de suppression de tension de
400 V ou moins et une tension électrique de 110 V C.A., 15 A.
Ce tapis roulant doit être mis à la terre pour réduire le risque de choc électrique. La mise à la terre fournit une voie de moindre
résistance au courant électrique en cas de mauvais fonctionnement du tapis roulant. Ce tapis roulant est équipé d’un cordon
électrique avec un conducteur de mise à la terre et une fiche de mise à la terre. Brancher toujours le cordon électrique dans un
limiteur de surtension et brancher le limiteur de surtension dans une prise appropriée, correctement installée et mise à la terre
conformément à tous les codes locaux et ordonnances.
Ce produit doit être utilisé avec un circuit nominal de 110 volts et à une fiche de mise à la terre qui ressemble à celle illustrée ci-
dessous.
Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre ne sont PAS recommandés pour ce produit.
Les prises avec disjoncteur de fuite de terre et les disjoncteurs de fuite de terre pourraient provoquer un mauvais
fonctionnement de cet équipement.

6 5.65i TREADMILL
BEFORE YOU BEGIN
Open the boxes:
Open the boxes of your new equipment. Inventory all parts included in the boxes, and Supplied Hardware lists
on pages 8 for a full count of the parts included. If you are missing any parts or have any questions contact us
directly at 888-800-1167
Gather your tools:
Before you begin, make sure that you have gathered all the necessary tools you may require to assemble the unit
properly. Having all of the necessary equipment at hand will save time and make the assembly quick and hassle-free.
Please note that your assembly kit includes all of the tools necessary to assemble the unit. You may however choose
to use your own Phillips head screwdriver and/or Allen wrench
Clear your work area:
Make sure that you have cleared away a large enough space to properly assemble the unit. Make sure the space is
free from anything that may cause injury during assembly. After the unit is fully assembled, make sure there is a
comfortable amount of free area around the unit for unobstructed operation.
Invite a friend:
Some of the assembly steps may require heavy lifting. It is recommended that you obtain the assistance of another
person when assembling this product.
User Weight Limitation:
Please note that there is a weight limitation for this product. If you weigh more than 350LBS (Approx. 160 Kgs). It is
not recommended that you use this product. Serious injury may occur if the user’s weight exceeds the limit shown
here. This product is not intended to support users whose weight exceeds this limit.
Care and maintenance:
The safety level can be maintained only if it is examined for damage and wear.
Replace any defective components immediately and stop all use of the equipment until repaired.
Always take care when mounting the equipment. Straddle the equipment by placing your feet on the straddle rails.
Dismount from the equipment only after all parts have stopped.
Always check the wear and tear components like pulley, belts, etc.…To prevent injury.
There is an emergency stop, in the form of a SAFETY KEY, to prevent injury; This key should always be attached to
your clothing when using the treadmill.
Hardware Ruler
Millimeters

www.smoothfitness.com 7
PARTS LIST
PART NAME SPECIFICATION QUANTITY
565i-1 Base fame 1
565i-2 Platform frame 1
565i-3 Incline frame 1
565i-4 Upright frame 2
565i-5 Ezfit linking parts 2
565i-6 Motor base frame 1
565i-7 Computer frame 1
565i-8 External extension tube frame 1
565i-9 Internal extension tube frame 1
565i-10 Running deck support 1
565i-11 Allen C.K.S half thread screwM10*65 M10*65 1
565i-12 Allen C.K.S half thread screwM10*50 M10*55 4
565i-13 Allen C.K.S half thread screwM10*45 M10*45 1
565i-14 Allen C.K.S half thread screwM8*55 M8*55 8
565i-15 Allen C.K.S half thread screwM8*50 M8*50 2
565i-16 Allen C.K.S half thread screwM8*40 M8*40 2
565i-17 Allen C.K.S half thread screwM8*35 M8*35 2
565i-18 Allen C.K.S full thread screwM8*20 M8*20 2
565i-19 Allen socket head full thread screwM8*80 M8*80 2
565i-20 Allen socket head full thread screwM8*75 M8*75 2
565i-21 Allen socket head full thread screwM8*30 M8*30 2
565i-22 Allen socket head full thread screwM8*10 M8*10 4
565i-23 Hex full thread boltM8*50 M8*50 1
565i-24 Hex full thread boltM8*40 M8*40 1
565i-25 Hex full thread boltM8*20 M8*20 2
565i-26 Philips full thread screwM8*25 M8*25 2
565i-27 Philips full thread screwM6*25 M6*25 6
565i-28 Philips C.K.S full thread screwM5*20 M5*20 3
565i-29 Philips C.K.S full thread screwM5*10 M5*10 12
565i-30 Philips C.K.S full thread screwM4*10 M4*10 13
565i-31 Philips C.K.S self-tapping screw ST4*15 ST4*15 34
565i-32 Philips C.K.S self-tapping screwST4*30 ST4*30 4
565i-33 Philips C.K.S self-tapping screwST4*10 ST4*10 8
565i-34 Philips self-tapping screw ST3*10 ST3*10 6
565i-35 Philips self-tapping screw ST4*15 ST4*15 8
565i-36 Philips self-tapping screw ST3*10 ST3*10 2
565i-37 Philips C.K.S steel tapping screw ST4*15 ST4*15 7
565i-38 Flat washerΦ10 Φ10 5
565i-39 Flat washerΦ8 Φ8 17

8 5.65i TREADMILL
PARTS LIST
565i-40 Washer Φ5 Φ5 1
565i-41 Curve washer Φ8 Φ8 4
565i-42 Self-fix bolt M10 M10 6
565i-43 Self-fixing bolt M8 M8 8
565i-44 Ferrite cover 4
565i-45 Lateral cover (left) 1
565i-46 Motor cover 1
565i-47 Lateral cover (left) 1
565i-48 Side rail 2
565i-49 Central side rail 2
565i-50 End cap（Left）1
565i-51 End cap（Right）1
565i-52 Computer cover 1
565i-53 PCB cover 1
565i-54 PCB 1
565i-55 Accessory tray (left) 1
565i-56 Accessory tray (right) 1
565i-57 Bottle holder 2
565i-58 Safety key 1
565i-59 Hand pulse 2
565i-60 Metal socket 1
565i-61 Tube bushing 2
565i-62 Tube plug 2
565i-63 Foot cover 2
565i-64 Upright lateral cover (left) 1
565i-65 Upright lateral cover (right) 1
565i-66 Motor base frame gasket (1) 2
565i-67 Motor base frame gasket (2) 4
565i-68 Back cover 1
565i-69 Shock absorber (1) 4
565i-70 Shock absorber (2) 2
565i-71 Wheel 4
565i-72 Pop-pin knob 1
565i-73 Form tube 2
565i-74 Foot 4
565i-75 Cable right 1
565i-76 Cable guide 3/8 3/8 1

www.smoothfitness.com 9
PARTS LIST
565i-77 Cable guide1/8 1/8 1
565i-78 Strap 8
565i-79 Switch 1
565i-80 Rest switch 1
565i-81 Controller 1
565i-82 Power code 1
565i-83 Filter 1
565i-84 Choke Φ6*Φ20 6
565i-85 Adaptor 1
565i-86 Motor 1
565i-87 Incline motor 1
565i-88 Running deck 1
565i-89 Front roller 1
565i-90 Rear roller 1
565i-91 Hydraulic 1
565i-92 Transmission belt 1
565i-93 Running belt 1
565i-94 Ferrite 2
565i-95 Cushion 4
565i-96 Stand post wire 1
565i-97 Control board 1
565i-98 Filter(if with ce) IF WITH CE 1
565i-99 Inducement(if with ce) IF WITH CE 1
565i-100 Handle bar wire 1
565i-101 Up handlebar cover 2
565i-102 Down handle bar cover 2
565i-103 Hand pulse set 1
565i-104 Philips C.K.S steel tapping screw ST4*20 7
565i-105 Fan box 1
565i-106 Fan box cover 1
565i-107 Fan box Baffle 1
565i-108 Fan 1
565i-109 Cross crew M4×40 2
565i-110 Self-lock nut M4 2

10 5.65i TREADMILL
PARTS DIAGRAM
MOST OF THE PARTS SHOWN HERE HAVE BEEN PRE-ASSEMBLED.
30
98
99
2
3
9
8
1
6
10
11
12
12
12
12
13
14
14
16
16
17
18
19
20
20
21
22
22
23
24
25
26
26
27
27
27
27
28
28
28
29
29
29
29
29
292929
29
29
30
30
30
30
30
313131
31
31
31
31
104
33
33
343434
343434
35
35
35
35
35
36
83
37
37
37
37
37
38
38
38
38
38
39
3939
39
39
39
39
39
39
39
39
40
42
42
42
42
42
42
43
43
43
44
44
44
44
45
46
47
48
48
49
49
50
51
52
53
54
55
56
57
57
58
60
61
63
63
6465
66
66
67
67
68
69
69
69
70
70
71
71
72
74
74
74
74
7576
77
78
79
80
81
82
85
86
87
88
89
90
91
92
93
94
94
95
31
31
3333
3384
84
84
84
43
19
43
39
31
31
96
100
41
102
101
41
102
101
59
62
32
73
103
62
32
73
31
7
31
4
4
5
15
15
5
97
107106
105
108
104
104
104
109
110

www.smoothfitness.com 11
ASSEMBLY
–
PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
Step1: Assemble console mast to the base frame.
1).Place the product in the area it will be used
Note: the treadmill must be placed on a level surface.
2).Remove the treadmill from the packing
3).Rotate the left and right uprights towards the front of the treadmill.
4).Once the uprights are in position secure the left side with 4 M8*50 bolts.
5). Repeat the above process for the right side
Bolts should be hand tight only. Do
not tighten until step 2 is complete
Caution Pinch point Do not
pinch the wires between frame
Only and hand tighten
bolts until step is
complete

12 5.65i TREADMILL
ASSEMBLY
Step2: Assemble the console to the console masts
1).Rotate the console towards the direction of the arrow.
Caution: Do not Pinch the wire between the upright frame and the
console assembly( wires on right side)
2). Secure the console assembly to the uprights with 2 x
M8*20mm knobs
4). TIGHTEN ALL BOLTS NOW. Do not proceed until all bolts have
been fully tightened.
Caution Pinch point! Do not pinch wires between the frame.
Tighten all bolts and fasteners now

www.smoothfitness.com 13
ASSEMBLY
Step3: Assemble the Frame Covers
1).Slide the frame covers on to the upright and down over the base frame.
2).Fasten the frame cover using 2 x ST4*20 Screws
Tighten all bolts and fasteners now

14 5.65i TREADMILL
ASSEMBLY
Step3: Install the Cup Holders
1).Insert the cup holders into the console assembly.
These parts snap into place
Tighten all bolts and fasteners now

www.smoothfitness.com 15
FOLDING INSTRUCTIONS
How to fold and unfold the treadmill:
Your treadmill can be folded up for space saving storage. To do this follow the instructions here:
Fold Up
After the workout session, you can fold the
treadmill to the upright position. Lift up the
rear end of the treadmill until the upper
folding latch clicks. Before releasing the
treadmill frame verify the folding mechanism
is locked.
Unfold
1. Push up the on deck frame with your
hands.
2. Loosen then pull the locking knob
3. Lower the treadmill deck frame. The deck
frame will begin tol drop automatically
without hand support.
Horizontal Adjustment
For floor stability, you can adjust the 2
screws located under the front of base
frame.
1. Lift the machine on one side and then
turn the screw under the front of base frame.
2. Turn the screw clockwise to make the
screw go up.
3. Turn the screw counterclockwise to make
the screw go down.

16 5.65i TREADMILL
MAINTENANCE
HOW TO MAINTAIN YOUR TREADMILL:
Proper maintenance is very important to ensure your treadmill is always in top working condition. Improper
maintenance could cause damage or shorten the life of your treadmill.
•Important: Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer,
keep liquids away and keep it out of direct sunlight.
•Inspect and tighten all parts of the treadmill regularly. Replace any worn parts immediately.
BELT ADJUSTMENT:
The running belt has been properly adjusted at the factory. However transportation, uneven flooring or other
unpredicted reasons could cause the belt to shift off center resulting in the belt rubbing with the plastic side rail or end
caps and possibly causing damage. To adjust the belt back to it’s proper position please follow the directions below:
1. If your belt tends to walk to the right, rotate the right tension bolt clockwise. We recommend adjustments of
1/4 turn at a time, and follow with a test. If your belt continues to walk to the right, simply adjust the left belt
tension bolt by turning it 1/4 turn counterclockwise, and follow with a test.
2. If your belt tends to walk to the left, rotate the left tension bolt clockwise 1/4 turn at a time, and follow with a
test. If the belt continues to walk to the left, simply adjust the right tension bolt counterclockwise.
3. If your belt appears to be loose, simply tighten both bolts evenly 1/4 turn. If it appears tight, simply loosen
both bolts evenly 1/4 turn.
Right and left tension bolts are located at the rear of the treadmill.
DECK LUBRICATION:
The walking belt has been pre-lubricated at the factory. However, it is recommended that the walking board be
checked periodically for lubrication to ensure optimal treadmill performance. Your treadmill should not have to be
lubricated usually within 3 months.
Smooth Fitness recommends lubricating the walking deck a minimum of twice a year for light use (2 days a week) and
four times a year for heavier use(3 times a week multiple users)
Please visit www.smoothfitness.com for approved maintenance supplies

www.smoothfitness.com 17
MAINTENANCE
To apply lubricant to the walking belt:
1. Position the walking belt so that the seam is located on top and in center of the walking board.
2. Insert the nozzle of the lubricant container under the belt
3. While lifting the side of the walking belt, position the nozzle between the walking belt and the board
approximately 15 cm (6 inches) from the front of the treadmill. Apply the silicone lubricant to the walking
board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Note: it is
important to get the lubricant as far to the center of the walking board as possible.
4. Allow the silicone to "set" for 1 minute before using the treadmill.
Apply lubricant from front to back.
CLEANING:
Routine cleaning of your treadmill will extend the product's life.
Warning:To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is
unplugged from the wall electrical outlet before attempting any cleaning or maintenance.
Important:Never use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep
liquids away and keep it out of direct sunlight.
After each workout:Wipe off the console and other treadmill surfaces with a clean, water dampened soft
cloth to remove excess perspiration.
Weekly:Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and
eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.
Note: when lubricating the belt, make sure the treadmill is located on a surface that can
be easily cleaned. After lubricating your treadmill running belt, clean any excess silicone
off the belt and frame.

18 5.65i TREADMILL
IMPORTANT STEPS
Warning:
Before using this product, please consult your personal physician for a complete physical examination. Frequent and
strenuous exercise should be approved by your doctor first. If any discomfort should result from your use of this
product, stop exercising and consult your doctor. Proper usage of this product is essential. Please read your manual
carefully before exercising.
Avertissement :
Avant d’utiliser de produit, veuillez consulter votre médecin personnel pour un examen médical complet. Des
exercices fréquents et difficiles doivent d’abord être approuvés par votre médecin. Si vous ressentez un malaise par
suite de l’utilisation de produit, arrêtez les exercices et consultez votre médecin. Un usage approprié de ce produit est
essentiel. Veuillez lire attentivement votre manuel avant de commencer les exercices.
Les enfants doivent rester éloignés de l’équipement pendant son utilisation et lorsqu’il est laissé sans surveillance.
Portez toujours des vêtements appropriés pour les exercices, y compris des chaussures d’athlétisme. Ne portez pas
de vêtements amples qui pourraient être pris dans l’appareil durant les exercices.
Please keep all children away from the equipment during use and when equipment is unattended.
Always wear appropriate clothing, including athletic shoes, when exercising. Do not wear loose clothing that could
become caught during exercising.
Make sure that all bolts and nuts are tightened when equipment is in use. Periodic maintenance is required on all
exercise equipment to keep it in good condition.
Before beginning:
How you begin your exercise program depends on your physical condition. If you have been inactive for several
years, or are severely overweight, you must start slowly and increase your time gradually, a few minutes per week.
Initially you may be able to exercise only for a few minutes in your target heart rate zone. However, your aerobic
fitness will improve over the next six to eight weeks. Don’t be discouraged if it takes longer. It’s important to work at
your own pace. Ultimately, you’ll be able to exercise continuously for 30 minutes. And the better your aerobic fitness,
the harder you will have to work to stay in your target heart rate zone. But remember these essentials:
Contact your physician before starting a workout or training program. Have your doctor review your training and
diet programs to advise you of a workout routine you should adopt.
Begin your training program slowly with realistic goals that have been set by you and your doctor.
Supplement your program with some type of aerobic exercise such as walking, jogging, swimming, dancing and/or
bicycling. Monitor your pulse frequently. If you do not have an electronic heart rate monitor, have your physician
show you the proper way to manually check your pulse by using your wrist or neck. Establish your target heart
rate based on your age and condition.
Drink plenty of fluids during the course of your routine. You must replace the water content lost from
excessive exercising to avoid dehydration. Avoid drinking large amounts of cold liquids. Fluids should be at
room temperature when consumed.

www.smoothfitness.com 19
MUSCLE CHART
Targeted muscle groups:
The exercise routine that is performed on this product will develop primarily lower body muscle groups. These muscle
groups are shown in gray color on the chart below.
MUSCLE GROUPS
A Shoulder muscles Calf muscles G
B Pectoral muscles Trapezium muscles H
C Bicep muscle Tricep muscles I
D Abdominal muscles Back muscles J
E Forearm muscles Gluteal muscles K
F Quadricep muscles Hamstring muscles L

20 5.65i TREADMILL
STRETCHING ROUTINE
Warm up and cool down:
A successful exercise program consists of a warm-up, aerobic exercise, and a cool-down. Do the entire program at least two and
preferably three times a week, resting for a day between workouts. After several months, you can increase your workouts to four or
five times per week.
Warming up is an important part of your workout, and should begin every session. It prepares your body for more strenuous exercise
by heating up and stretching out your muscles, increasing your circulation and pulse rate, and delivering more oxygen to your muscles.
At the end of your workout, repeat these exercises to reduce sore muscle problems. We suggest the warm-up and cool-down
exercises on the following pages:
Toe Touch:
Slowly bend forward from
your waist, letting your back
and shoulders relax as you
stretch toward your toes.
Reach down as far as you
can and hold for 15 counts.
Shoulder Lift:
Lift your right shoulder up
toward your ear for one
count. Then lift your left
shoulder up for one count as
you lower your right shoulder.
Inner Thigh Stretch:
Sit with the soles of your feet
together with your knees
pointing outward. Pull your
feet as close into your groin
as possible. Gently push
your knees towards the floor.
Hold for 15 counts.
Hamstring Stretch:
Sit with your right leg
extended. Rest the sole of
your left foot against your
right inner thigh. Stretch
toward your toe as far as
possible. Hold for 15 counts.
Relax and then repeat with
left leg extended.
Side Stretch:
Open your arms to the side
and continue lifting them until
they are over your head.
Reach your right arm as far
upward toward the ceiling as
you can for one count. Feel
the stretch up your right side.
Repeat this action with your
left arm.
Calf-Achilles Stretch:
Lean against a wall with your
left leg in front of the right
and your arms forward. Keep
your right leg straight and the
left foot on the floor; then
bend the left leg and lean
forward by moving your hips
toward the wall. Hold, and
then repeat on the other side
for 15 counts.
Head Roll:
Rotate your head to the right
for one count, feeling the
stretch up the left side of your
neck. Next, rotate your head
back for one count, stretching
your chin to the ceiling and
letting your mouth open.
Rotate your head to the left
for one count, and finally,
drop your head to your chest
for one count.