Socket 7Qi User manual

COMMAND BARCODES
2D IMAGER MODELS - D750, 7Qi, 7Xi, 7XiRx
This document pertains to the following DuraScan D750, CHS 7Qi/7Xi/7XiRx
The part number (P/N) is
labeled on the
DuraScan 700 Series.
Model P/N
D750 Gray 8550-00096 Model P/N
7Qi Blue 8550-00081
7Qi Gray 8550-00078
7Qi Green 8550-00090
7Qi Red 8550-00080
7Qi White 8550-00082
7Qi Yellow 8550-00079
Model P/N
7Xi Gray 8550-00059
7XiRx White 8550-00060
The part number (P/N) is labeled inside the battery compartment for
the CHS 7 Series.

Table of Contents
General Command Barcodes
Data Editing - Prex/Sufx
Rumble/Beep Modes
Language Settings
Charging Stand Modes
Apple iOS Oscreen Keyboard
Advanced Users Only
1D Symbologies
2D Symbologies
Postal Symbologies
SCANNER MODES
3
5
6
7
8
9
10
13
17
20
23

INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
All Bluetooth Connection Modes OK
Scan only with Scanner in Application Mode (SPP) or Application Mode (MFi-SPP)
Scan only with Basic Mode (HID)
Symbologies
Make sure the scanner is not connected to a host computer or device before scanning a
command barcode!
To use scanner on multiple hosts, perform the unpair sequence.
1.Power on the scanner.
2.Press and hold down the trigger button.
3.Press and hold down the power button.
4.After you hear 3 beeps, release both buttons.
By default, the Scanner is in Basic Mode as a Keyboard device.
For scanners in Bluetooth Application Mode (SPP) or Application Mode (MFi-SPP), you can alterna-
tively congure some settings by using the Scanner Settings app. You can download the app from iTunes,
and Google Play.
GENERAL COMMAND BARCODES
3

4
Scan command barcode(s) to quickly congure the Scanner. By default, the Scanner is in Basic Mode as a
Keyboard device.
IMPORTANT! Make sure the Scanner is not connected to a host computer / device before scanning a com-
mand barcode!
Bluetooth Connection Mode (General)
Basic Mode (HID)-Keyboard (default)
Congures the Scanner as a Keyboard class device
(required for Apple iOS / Mac OS, Nokia E71).
#FNC HID Acceptor 000000000000#
Basic Mode (HID)-Peripheral
Congures the Scanner as a Peripheral class device
(optional for Windows and Android).
#FNC COD HID 000500#
Application Mode (SPP)
Changes the Scanner to Bluetooth Serial Port Prole
(SPP) mode (optional for Windows and Android).
#FNC SPP Acceptor 000000000000#
Application Mode (MFi-SPP)
Changes the Scanner 7Qi, 7Xi, 7XiRx to Apple Ap-
plication Mode (MFi-SPP) (equivalent to Application
Mode (SPP).
#FNC IOS ACCEPTOR 000000000000#
Factory Defaults
Factory Reset
Congures the Scanner to revert all settings to fac-
tory defaults. The Scanner powers off after scan-
ning this barcode.
#FNB41FB970001#

5
You can congure the Scanner to automatically add a sufx and/or prex to each scan of data.
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Character or Command to Insert Scan to Enable
Carriage Return Sufx
(Default)
#FNB 4160C100010D#
Tab Sufx
#FNB 4160C1000109#
Carriage Return & Line Feed Sufx
#FNB 4160C100020D0A#
Data As Is – No prex or sufx
#FNB 4160C10000#
DATA EDITING – PREFIX / SUFFIX

6
Important! Make sure the Scanner is not connected to a host computer before scanning a command bar-
code.
*For Models 7Xi/7Qi Rev M and below refer to page 12.
Rumble/Beep Modes
Vibrate “On”
Enables Scanner to vibrate to indi-
cate successful scan
#FNB01310001000100FA0000#
Vibrate “Off”
Disables Scanner from vibrating to
indicate successful scan
#FNB013100010000#
Beep “On”
Enables Scanner to beep to
indicate successful scan
#FNB01190E000100030078004B#
Beep “Off”
Disables Scanner from beeping to
indicate successful scans
#FNB01190E000100000078004B#
RUMBLE/BEEP MODES

7
Basic Mode (HID) Keyboard Language Settings
Scan to Enable Language
English
#FNB41FBA10000#
French
#FNB41FBA10001#
German
#FNB41FBA10002#
Spanish
#FNB41FBA10003#
LANGUAGE SETTINGS

8
Charging Stand Modes
Mobile Mode - Normal (default)* Scanning this
barcode will enable the scanner to enter mobile
mode. It will always be in manual trigger mode
even when placed in the stand or cradle.
*Scanner Factory Reset returns to Mobile Mode.
#FNB 41FBA50000#
Auto Mode (Presentation Mode)
Scanning this barcode will enable the scanner to
enter auto mode. When the scanner is in auto
mode, it will switch to presentation trigger mode
when it detects power on the cradle pins. When
the scanner is removed from the cradle it will
remain in presentation trigger mode until the
users presses the trigger. At that point it will
switch to normal manual trigger mode. Auto Mode
command barcode is also printed on the Charging
Stand label.
#FNB 41FBA50003#
CHARGING STAND MODES

9
APPLE IOS OSCREEN KEYBOARD
Apple iOS Onscreen Keyboard
Apple iOS Onscreen Keyboard and Beep Enabled (Default)
Congures the Scanner to activate the iOS onscreen keyboard when connected to an iOS device and the
Scanner power button is double-pressed.
Scan only with Scanner in Basic Mode
Disable both Onscreen Keyboard and Beep
#FNB 41FBDA000C000000000000000000000000#
Enable Beep
#FNB 41FBDA000C000500000000000000000000#
Disable Beep
#FNB 41FBDA000C000100000000000000000000#

ADVANCED USERS ONLY
Bluetooth Connection Modes
*For Models 7Xi/7Qi Rev M and below refer to page 4.
Basic Mode (HID) (default)
Congures the Scanner to Human Interface
Device (Basic Mode). The Scanner will be
discoverable as a Keyboard to other Bluetooth
devices.
Required for Apple iOS, Mac OS, Nokia E71.
#FNB00F40001#
Basic Mode (HID)-Keyboard (default)
Changes a Scanner in Basic Mode (HID)-Pe-
ripheral mode to
Basic Mode (HID)-Keyboard mode.
Required for Mac OS and Nokia E71, optional
for Apple iOS.
#FNB0001000540#
Basic Mode (HID)-Peripheral
Changes a Scanner in Basic Mode (HID)-Key-
board mode to
Basic Mode (HID)-Peripheral mode.
Optional for Windows and Android.
#FNB0001000500#
Application Mode (SPP)
Congures the Scanner to Serial Port Prole
(SPP) mode.
Required for BlackBerry, optional for Windows
and Android.
#FNB00F40000#
Application Mode (MFi-SPP)
Changes a Scanner 7Ci to Application Mode
(MFi-SPP).
Required for Apple iOS applications developed
with SocketScan 10 SDK.
#FNB00F40002#
10