Socket SocketScan S730 User manual

Bluetooth®wireless technology
laser barcode scanner
Model S730
www.socketmobile.com
SOCKETSCAN®
S730 USERGUIDE
socketmobile.com

Package Contents 4
Product Information 5
Attach Wrist Strap 6
Charge the Battery 7
Optional Charging Accessories 8
Powering on/off 9
Scanning Barcodes 10
Bluetooth Connection Modes 11-12
How to setup your scanner:
Download our Companion App for Apple® and Android Device 13
Setup Alternatives
How to setup your scanner in Basic Mode:
Basic Mode 14
How to setup your scanner in Application Mode:
Android 15
Apple®16-17
Windows 18
TABLE OF CONTENTS

Bluetooth Unpairing 19
Factory Reset 20
Restore Method 21
Bluetooth Reconnection of Scanner 22
Status Indicators 23-26
Product Specifications 27-28
Helpful Resources 29
Safety, Compliance & Warranty 30-40
Battery Warning Statements 35-36
Command Barcodes 41-47
TABLE OF CONTENTS

© 2019 Socket Mobile, Inc. All rights reserved. Socket®, the Socket Mobile logo, SocketScan®,
DuraScan®, Battery Friendly® are registered trademarks or trademarks of Socket Mobile, Inc. Micro-
soft® is a registered trademark of Microsoft Corporation in the United States and other countries.
Apple®, iPad®, iPad Mini®, iPhone®, iPod Touch®, and Mac iOS® are registered trademarks of Apple,
Inc., registered in the U.S. and other countries. The Bluetooth® Technology word mark and logos are
registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Socket Mobile,
Inc. is under license. Other trademarks and trade names are those of their respective owners.
Thank you for choosing Socket Mobile!
Let’s get started!
PACKAGE CONTENTS
SocketScan
S700
Wrist Strap Charging Connector
GET STARTED WITH
YOUR BARCODE SCANNER
More at: socketmobile.com/companion
Set up your scanner with
Socket Mobile Companion App
Download for Free!
Insert Card

PRODUCT INFORMATION
Scanner head
Product label
Lanyard Eyelet
Scan Indicator Light
Scan button
Power button*
Battery Light (Green/Yellow/Red)
Bluetooth Light (Blue)
Charging pins
Power Connector
Stand Attachment/
Battery Door twist lock
5
Made with antimicrobial additives to help provide protection against bacteria.
Socket Mobile’s barcodes scanners can be wiped clean with a cloth dampened with isopropyl
alcohol or water. Or, the barcode scanners can be wiped clean with a Sani-Cloth.
Warning: DO NOT IMMERSE IN WATER (scanner’s mechanics could be damaged)
DO NOT USE BLEACH FOR CLEANING (scanner’s material property may be aected)
*Also used to display the on-screen keyboard in Basic Mode (iOS only).

Attach the Lanyard (optional)
1. Detach the string loop of the tether from the lanyard.
2. Feed the string loop through the eyelet.
3. Pull the tether through the string loop.
4. Pull tight so the string loop is secure.
5. Reattach the string loop’s tether to the lanyard.
ATTACH WRIST STRAP
6

Plug in the power adapter and the scanner will beep twice.
The scanner must be fully charged before rst use. Please allow 8 hours
uninterrupted charging for the initial battery charge.
The scanner will stop charging once the battery is full (No overcharging
occurs)
• Amber Light = Charging
• Solid Green Light = Fully charged
Important: Charging from a computer USB port is not reliable and
not recommended.
CHARGE THE BATTERY
Power Adapter
7

Available separately
OPTIONAL CHARGING ACCESSORIES
8
For all optional accessories visit our Socket Store.com.
AC Power Supply
International Adapters
available
Charging Dock Charging Stand

Powering On:
Press and hold down the small
power button until the Battery
light turns on and the scanner
beeps twice (low-high).
Powering O / Disconnecting:
Press and hold down the small
power button until the scanner
beeps twice (high-low) and all
lights turn o.
Scanner will power o
automatically if device is not con-
nected within 5 minutes. Scanner
connected to a device will power
o within 2 hours if idle/inactive.
POWERING ON/OFF
Power button
9

MODEL - S730 CAUTION - LASER LIGHT. DO NOT
STARE INTO BEAM. CLASS 2 LASER PRODUCT
COMPLIES WITH LASER NOTICE 50.
ATTENTION - LUMIERE LASER NE PAS
REGARDER LE RAYON. CLASSE 2 PRODUIT LASER
650nm
1.0mw
1D Laser Barcode Scanner
Aim the scan beam
across the entire barcode
Scanning Barcodes
1. Hold the scanner at least 4 inches from the barcode.
2. Aim, press and hold the scan button.
By default, the scanner will beep, vibrate, and the scan indicator will
ash green to conrm a successful scan.
Caution: Do not stare directly into the scanner’s laser beam.
SCANNING BARCODES
Scan button
10