Socket CHS 7Xi User manual

Socket
Bluetooth®Cordless Hand Scanner (CHS)
7Xi and 7XiRx
2D and 1D Barcode Scanners
User’s Guide

1/2013 Document # 6410-00233 O
COPYRIGHT NOTICE
Copyright © 2010-2013 Socket Mobile, Inc. All rights reserved.
Socket, the Socket logo, Battery Friendly, Socket Bluetooth Cordless Hand Scanner, SocketCare, Mobility Friendly, and
SoMo are trademarks or registered trademarks of Socket Mobile, Inc. Bluetooth and the Bluetooth logos are
registered trademarks owned by Bluetooth SIG, Inc., U.S.A. and licensed to Socket Mobile, Inc. Apple, iPad, iPhone,
iPod touch, and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a
trademark of Apple Inc. All other brand and product names are trademarks of their respective holders.
The Socket Bluetooth Cordless Hand Scanner includes technology licensed under United States Patent Numbers
5,902,991, 7,429,000 B1 and D526,320 S.
Reproduction of the contents of this manual without the permission of Socket Mobile is expressly prohibited. Please
be aware that the products described in this manual may change without notice.
Feel free to contact Socket Mobile at:
Socket Mobile, Inc.
39700 Eureka Drive
Newark, CA 94560-4808
USA
http://www.socketmobile.com/contact
Direct: [phone]
USA/Canada Toll-free: 1-800-552-3300
Other than the above, Socket Mobile can assume no responsibility for anything resulting from the application of
information contained in this manual.
Please refrain from any applications of the Socket Bluetooth Cordless Hand Scanner that are not described in this
manual. Please refrain from disassembling the Bluetooth Cordless Hand Scanner. Disassembly of this device will void
the product warranty.
You can track new product releases, software updates and technical bulletins by visiting the Socket Mobile website
at: http://www.socketmobile.com.
IMPORTANT! The information in this User’s Guide pertains to
2D versions of the Socket Bluetooth Cordless Hand Scanner,
the CHS 7Xi and 7XiRx
If you have a 1D version of the CHS (7Ci / 7Di / 7DiRx / 7M / 7P), please refer to the appropriate
user’s guide at: http://www.socketmobile.com/pdf/data-collection/chs-series7-v3_ug.pdf

3
TABLE OF CONTENTS
COPYRIGHT NOTICE 2
1 INTRODUCTION 4
2SCANNER SETUP 11
3SETUP FOR WINDOWS PC 13
4SETUP FOR WINDOWS MOBILE 31
5SETUP FOR APPLE 49
6 SETUP FOR ANDROID 56
7 SETUP FOR BLACKBERRY 71
APPENDICES
A SPECIFICATIONS 84
B SAFETY AND USAGE TIPS 87
C BARCODE LABEL SPECIFICATIONS 89
D DECODE ZONE 90
E COMMAND BARCODES 91
F SPECIAL BUTTON SEQUENCES 104
G CAB INSTALLATION INSTRUCTIONS 106
H TROUBLESHOOTING 107
I TECHNICAL SUPPORT 114
LIMITED WARRANTY 115
SOCKETSCAN SOFTWARE LICENSE AGREEMENT 116
REGULATORY COMPLIANCE 117

CHAPTER 1: INTRODUCTION 4
1 | INTRODUCTION
Thank you for purchasing the Socket Bluetooth Cordless Hand Scanner (CHS), a portable
handheld barcode scanner that is small, light, comfortable to use and enables you to scan
data from 2D and 1D barcodes into a wide variety of computers, smartphones and PDAs.
The versions 7Xi and 7XiRx are also Apple®iOS certified for iPad®, iPhone®and iPod touch®
mobile digital devices.
SCANNER MODELS (2D VERSIONS)
Model
Part Number
Antimicrobial Casing
Apple iOS Certified
7Xi
8550-00059

7XiRx
8550-00060


PACKAGE CONTENTS
Socket Bluetooth
Cordless Hand Scanner
(2D model)
Charger with
international plugs
Lanyard/Belt Clip with
retractable tether
CD with software and
documentation
PRODUCT REGISTRATION
Socket highly recommends that all customers register their products. Registered users
receive priority for technical support and can opt in for special offers, upgrades, and new
product information. Register online at: http://support.socketmobile.com Alternatively, if
you install SocketScan 10, you can register the CHS through the software.
SOCKETCARE™SERVICE PROGRAM
SocketCare is an enhanced service program that features priority technical support,
accelerated repair and replacement and more. http://www.socketcare.com/
•SocketCare Plus 2 Year Warranty - SKU# SC1804-1349
•SocketCare Plus 3 Year Warranty - SKU# SC1805-1350
•SocketCare Comprehensive Plus – SKU# SC1806-1351

CHAPTER 1: INTRODUCTION 5
SYSTEM COMPATIBILITY REQUIREMENTS /COMPATIBLE DEVICES
For the latest list of compatible devices, please view the CHS Spec Sheet at:
http://ww1.socketmobile.com/Libraries/Documents/CHS_Series_7_Spec_Sheet.sflb.ashx
OS System Compatibility Requirements /
Compatible Devices
Bluetooth HID
Support
Bluetooth SPP
Support1
Windows
PC
•
Windows 7, Vista, XP
•Microsoft, Toshiba or Broadcom Bluetooth stack

Windows
RT
•Windows RT
 
Windows
Mobile
•Windows Mobile 6.x
 Microsoft
Bluetooth stack

Microsoft
or Broadcom
Bluetooth stack
Apple iOS Made for the following Apple devices:
•iPod touch (3rd – 5th generation)
•iPhone 3GS - 5
• iPad, iPad 2
 except
iPhone 3G

Only with
7Xi / 7XiRx &
compatible
application
1
Mac OS2
•
Mac OS X 10.4 to 10.6.6 for Mac / MacBook
•Bluetooth driver v2.24f3 (v1965) or v2.37f1

Android
Android 2.1 to 4.x. See Spec Sheet for device list.
 Android 2.2
to 4.x with HID
support

BlackBerry
BlackBerry OS 5.0.0.714 or later for Bold 9700
3


QNX BlackBerry PlayBook


1See Socket website for list of compatible applications (coming soon). Alternatively, use SocketScan 10 SDK.
2Compatibility verified for latest models at time of testing. Other models or Bluetooth driver versions not tested.
3Other devices not tested with SocketScan 10 and may require the previous software version.
ADDITIONAL DOCUMENTATION
Download the Quick Start Guide, Command Barcodes Sheet, SocketScan Advanced
Programming Guide or other manuals: http://www.socketmobile.com/support/downloads/

CHAPTER 1: INTRODUCTION 6
ABOUT BLUETOOTH HID AND SPP MODES
The CHS 7Xi and 7XiRx support two kinds of Bluetooth connections: Human Interface
Device (HID) and Serial Port Profile (SPP), each with its advantages and disadvantages.
By default, the CHS is set to HID mode for Keyboard devices, which requires no
software installation. For better performance, Socket highly recommends that
you use SPP (especially if scanning 2D barcodes).
See chart on previous page to check which mode(s) work with your OS / device platform.
Feature
CHS in HID mode
CHS in SPP mode
No software installation required


Supports SocketScan 10 software
with Socket EZ Pair


Non-printable ASCII, UNICODE,
international keyboard support


Parsing / data checks (with
SocketScan 10 SDK)


Binary data (with SDK)


Scanner configuration methods Special barcodes SocketScan 10 utility or special
barcodes
Scanner configuration options
Limited configuration options
Many configuration options
Change keyboard language
settings to English, French,
German, or Spanish


Barcodes containing a lot of data Less efficient communications
may lead to slower performance
More efficient data
communications
Compatible CHS revisions
All
7Xi / 7XiRx: All revisions,
requires compatible application
To change modes, use the Command Barcodes Sheet in Appendix E of this manual.
To learn more about HID and SPP, please read our white paper:
http://www.socketmobile.com/pdf/techbrief/socketscan-10-sdk_white-paper.pdf
ABOUT THE SOFTWARE
SocketScan™10 keyboard wedge software enters scanned data
directly into any program as if the data were manually typed. It
features Socket EZ Pair, which lets you scan an onscreen barcode to
quickly pair with a device. There are also utilities for configuring
scanner and software settings. Download the latest software from:
http://www.socketmobile.com/support/downloads/
Software for Bluetooth SPP mode only. No software
installation required for HID mode.
SocketScan 10 keyboard wedge software is designed for scanning
7 bit ASCII data. For Unicode, DoubleByte, Multibyte (e.g., for
Japanese or Chinese) or binary data, use the SocketScan 10 SDK to
convert the data before it is sent to your application. Learn more
about the SDK at: http://www.socketmobile.com/products/sdk/

CHAPTER 1: INTRODUCTION 7
ACCESSORIES
Accessory
SKU Number
Charging Cradle
For 7Xi:
SKU# AC4055-1382
For 7XiRx:
SKU# AC4056-1383
USB A Male to DC Plug Cable SKU# AC4051-1192
Car Charger SKU# AC4057-1384
AC Power Supply with USB charge
cable SKU# AC4058-1415
Battery Replacement Kit SKU# AC4059-1479
Lanyard with Pull Reel SKU# AC4038-1070
Protective Carrying Case / Belt Holster
From Taylor Made Cases
SKU# TM-HS650-KT
Waterproof Skin
From Viziflex Seels
SKU# SMS01
For more information on Socket accessories for the CHS, please visit:
http://ww1.socketmobile.com/products/bluetooth-scanners/accessories-bt.aspx
For more information on accessories from Taylor Made Cases, Viziflex Seels or other partners,
please visit: http://ww1.socketmobile.com/products/star/custom-cases.aspx

CHAPTER 1: INTRODUCTION 8
HARDWARE FEATURES
Product Diagram
Trigger button
Power button
Status indicator LED
Protective rubber bumper
Power connector
(Remove rubber cap to access)

CHAPTER 1: INTRODUCTION 9
Antimicrobial Protection (CHS 7XiRx only)
The CHS 7XiRx is made with antimicrobial materials to provide an extra layer of
protection to the devices against the multiplication and spread of potentially harmful
bacteria and microbes.
Socket recommends using Sani-Cloth®Plus brand disposable cloth wipes as the standard
disinfectant wipe for the CHS 7XiRx. For more information about the wipes, please visit:
http://www.pdipdi.com
Do not use a bleach-based or Dispatch® brand cloth wipes, as they negate all
antimicrobial properties that have been added to the device.
To clean the scanner window, use an eye lens cleaner or clean, soft cloth.
Status Indicator LED
LED
LED Behavior
Meaning
Bluetooth Status (Blue) 1 blink per second Bluetooth radio is on, but not connected
1 blink per 3 seconds
Scanner connected to computer
Good Read (Green) On Data successfully scanned and transmitted to
host device
On when connected to
charging source
Scanner is fully charged
Battery Status (Red)
1 blink per second
20% battery capacity remaining
On when connected to
charging source
Battery Charging (on cradle or AC power)
Off Powered off or Good Battery status
Status Indicator Beeps
Beep Patterns Meaning
2 beeps (low-high)
Power on
2 beeps (high-low) Power off
1 beep Scanner connected to computer and ready to scan barcodes. When
connected, the scanner will auto power off after 2 hours of inactivity.
1 beep with green LED
(configurable setting)
Data successfully scanned and sent to computer.
1 beep (low) You have double-pressed the power button, and the CHS has enabled
support for simultaneous scanning and onscreen keyboard entry for
Apple iOS
2 beeps (same tone) Scanner disconnected from computer. When disconnected, the scanner
will auto power off after 5 minutes of inactivity.
1 long beep Scanner unsuccessfully tried multiple times
to connect to computer. After
these attempts, the scanner will go into sleep mode. I
n sleep mode, if the
trigger button is pressed, the CHS will restart the connection attempts.
The CHS will automatically power off after 5 minutes of inactivity.
5 beeps The CHS detects an internal fault, will reset and power off. If connected
to a host computer, the scanner will disconnect during the reset.

CHAPTER 1: INTRODUCTION 10
Vibrate
Vibrate Meaning
Vibrate Mode
Data successfully scanned and sent to host device.
If the CHS supports SPP mode for your OS, you can modify the LED, beep and
vibrate settings, by using the Scanner Settings utility (see chapter for your OS).
Bluetooth Mode Sequence
When the CHS is powered on, its Bluetooth mode will gradually change if no connection is made.
Time after turning on CHS
Bluetooth mode
0-5 minutes
Discoverable and connectable
5 minutes
CHS automatically powers off
If a button is pressed, but no connection is made, the CHS will stay powered on
for another 5 minutes.
Simultaneous Use of CHS and Socket Plug-in Device
You can use the CHS and a Socket plug-in barcode / RFID / magnetic stripe reader
simultaneously on the same host computer or device. However, you will need to run two
different versions of SocketScan concurrently.
•For the CHS, use SocketScan 10, which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
•For Socket plug-in devices, use SocketScan 7 (or older), which you can download from:
http://www.socketmobile.com/support/downloads/data-collection/series5/
•For more information about Socket plug-in devices for data collection, please visit:
http://ww1.socketmobile.com/products/handheld-computers/accessories-
hc.aspx?cat=Data%20Collection

CHAPTER 2: SCANNER SETUP 11
2 | SCANNER SETUP
ASSEMBLING THE AC ADAPTER
If you wish to charge the CHS with the AC adapter, the correct plug for your region must
be attached first. Four different plugs are included. Simply find the correct plug for your
region and slide it into the head of the adapter until it latches. Plug the cable into the AC
adapter head, making sure it is positioned correctly.
The charger cannot be sold in Japan.
CHARGING THE SCANNER
The CHS must be fully charged before first use. Use the AC adapter to charge from a wall
outlet. Optional charging accessories are also available. Initial charging takes about 3
hours.
The LED will be solid red while charging and green when the battery is full.
Included Charging
Hardware
•
AC adapter with international plugs
•USB A Male to DC Plug Cable (2A maximum)
AC Adapter Rating
5V, 2A, positive pole center
Power Jack Connector
4 mm barrel
Optional Charging
Hardware
•
Charging cradle
•Car charger
•AC or DC adapter from Socket SoMo
For more information, including how to purchase, please
see Accessories.
WARNING: Do not remove or replace the pre-installed battery if you
have an early version of the CHS 7Xi / 7XiRx. Check the first 4 digits of
the Serial Number (S/N) labeled inside the battery compartment. If the
number is less than 1135, then the battery should not be removed. If the
the number is 1135 or greater, you can remove the battery and replace
it with the Battery Replacement Kit as needed.

CHAPTER 2: SCANNER SETUP 12
ATTACHING THE TETHER (OPTIONAL)
1. Use a coin or screwdriver to unlock and remove the battery cover. Turn the lock
underneath the scanner to a horizontal position to unlock.
2. Remove the battery cover.
The Bluetooth Device Address (BDA) is printed on a label inside the
battery compartment. The address is used to identify the CHS.
3. Attach the tether to the battery cover. Wrap the string loop around the inside
part of the lock.
4. Replace the battery cover and turn the lock to a vertical position to secure it.
Battery Type
Li ion rechargeable
Battery Life
10 hours on single charge*
* Battery performance may vary depending on vibrate settings and work environment
Revision Letter - follows Part Number (P/N)
Bluetooth Device Address
(BDA)

CHAPTER 3: SETUP FOR WINDOWS PC 13
3 | SETUP FOR WINDOWS PC
This chapter explains how to install and use the Bluetooth
Cordless Hand Scanner (CHS) with a Bluetooth enabled computer
running Windows 8, 7, Vista or XP
Before you begin the instructions in this chapter, make sure you
have charged the scanner, as described in Chapter 2, “Scanner
Setup”
CONNECTION OPTIONS
For Windows, the CHS offers two different connection options. For more information about HID
and SPP, see Chapter 1.
Bluetooth
Mode
Pros Cons
HID
Instructions
on next
page
•
No software installation needed
•Can change keyboard language settings to
English, French, German or Spanish.
•
Limited configuration options
•Limited to printable ASCII and some
non-printable characters
•Less efficient data communications for
barcodes containing lots of data
SPP
Instructions
on page 18
•
Many configuration options
•Broad character set, including non-printable
ASCII, international keyboards
•More efficient data communications for
barcodes containing lots of data
•
Software installation required
The CHS has been successfully tested in SPP mode with the Microsoft, Broadcom, and
Toshiba Bluetooth stacks. Due to the many device manufacturer and Bluetooth stack
combinations, the CHS might not work correctly in SPP mode on some PCs.
Socket highly recommends that you use the CHS in SPP mode. To learn more, read
our white paper: http://www.socketmobile.com/pdf/techbrief/socketscan-10-
sdk_white-paper.pdf.

CHAPTER 3: SETUP FOR WINDOWS PC 14
OPTION 1: USING THE CHS IN HID MODE
To pair the CHS with your computer:
You only need to pair the CHS with you computer the first time you try
to connect.
1. Power on the CHS. Press and hold the small power button until the LED turns
blue and the CHS beeps twice (low-high).
The LED blinks blue once per second to show that the Bluetooth radio is
on but not connected.
2. Scan this barcode to configure the CHS for HID mode for peripherals. Afterwards,
the CHS will beep 3 times.
3. Turn on Bluetooth on your computer. Refer to your computer’s documentation for
instructions.
4. Use your computer’s Bluetooth software to connect to the CHS (see instructions
on next page).
In the device search, the CHS will appear as Socket 7Xi [xxxxxx] for the 7Xi /
7XiRx. The characters in brackets are the last six characters of the CHS
Bluetooth Device Address (BDA), which is labeled inside the battery
compartment.
To identify your type of Bluetooth stack, click Start. Right-click on My
Computer and click Properties | Hardware tab | Device Manager and
identify the manufacturer of your Bluetooth device.
Only computers running Bluetooth 2.0 will prompt for a passkey.

CHAPTER 3: SETUP FOR WINDOWS PC 15
Bluetooth
Stack
Connection Instructions
Microsoft
(Windows 7) 1. Right-click on the Bluetooth icon in the task tray. In the pop-up menu,
click Add a Device. A device search will begin.
2. In the device list, select Socket CHS 7x or Socket 7Xi and click Next.
3. If prompted, select Enter the device’s pairing code and enter the passkey
0000 (four zeroes). Click Next.
4. Follow the remaining screens to complete the wizard.
Microsoft
(Windows
Vista / XP)
1. Right-click on the Bluetooth icon in the task tray. In the pop-up menu,
click Add a Bluetooth Device.
2. In the welcome screen, check the box My device is set up and ready to
be found. Click Next. A device search will begin.
3. In the device list, select Socket 7Xi. Click Next.
4. If prompted, select Use the passkey found in the documentation and
enter the passkey 0000 (four zeroes). Click Next.
5. Follow the remaining screens to complete the wizard.

CHAPTER 3: SETUP FOR WINDOWS PC 16
Bluetooth
Stack
Connection Instructions
Toshiba
1. Double-click on the Bluetooth icon in the task tray.
2. In Bluetooth Settings, click New Connection.
3. In the connection wizard, select Express Mode. Click Next. A device search
will begin.
4. In the device list, select Socket 7Xi. Click Next.
5. If a passkey is requested, enter 0000 (four zeroes). Click OK.
6. Follow the remaining screens to complete the wizard.
Broadcom
(Widcomm) 1. Click on the Bluetooth icon in the task tray.
2. On the left side, under Bluetooth Tasks, click Add a Bluetooth Device. A
device search will begin.
3. In the device list, select Socket 7Xi.
4. If a passkey is requested, enter 0000 (four zeroes). Click Pair Now.
5. If prompted to select a Bluetooth service, select the CHS. click Finish.
Use Bluetooth v2.1 or later for best results. Do not use Quick Connect |
Bluetooth serial devices when the CHS is in HID mode.

CHAPTER 3: SETUP FOR WINDOWS PC 17
The CHS will beep once when it has connected and is ready to scan
barcodes. The LED will also blink blue once every 3 seconds.
To scan barcodes:
1. Open your application. Place the cursor where you want to enter data.
2. Hold the CHS about 4 inches (10 cm) from the barcode and press and hold the
trigger button. An aiming beam will appear for 3 seconds. Keep your hand
steady while scanning.
For example, try scanning the following barcode:
After data is read and sent to the computer, by default, the CHS will beep
once and vibrate, the LED will flash green, and the beam will turn off.
By default, a carriage return is applied after scanned barcode data is
entered. To disable the automatic carriage return, you can use the
Command Barcodes (use the Data Editing barcode for Data As Is).
If no data is read in a few seconds, the beam will turn off, and you must try
again.
The CHS supports keyboards in English, French, German, and Spanish. To
change keyboard language, see HID Keyboard Language Settings in
Appendix E.
To Disconnect:
To disconnect, turn off the CHS. Press and hold the power button for at least 3
seconds, until the CHS beeps twice (high-low) and the blue LED turns off.
Automatic Reconnection:
After you power on the CHS, it will automatically try to connect to the last computer it
paired and connected to. Make sure your computer is in range with Bluetooth enabled.
If the CHS is connected to your computer and gets disconnected, it will try to reconnect. Make
sure the computer is on and in range. If the CHS cannot reconnect after several attempts, it will
emit a long beep. Press the trigger button to restart the reconnection process.
See Appendix F for unpairing instructions.

CHAPTER 3: SETUP FOR WINDOWS PC 18
OPTION 2: USING THE CHS IN SPP MODE
To install SocketScan 10 software:
1. Access the SocketScan 10 installation file, either from the Socket website or the
SocketScan 10 installation CD.
•To install from a web download (recommended to ensure the latest software)
−Open: http://www.socketmobile.com/support/downloads/data-collection/series7/ss10/
−Click on the link for the exe file.
•To install from the SocketScan 10 installation CD:
−Insert the CD into the CD drive of your computer. It should auto-run.
(If the CD does not auto-run, use My Computer or File Explorer to access your
CD drive and click on setup.exe)
−In the Getting Started with SocketScan 10 wizard, click on the Installation link on
the left side. Scroll down to the section for Windows Desktop and click Install.
2. Download and run the installation file.
•Internet Explorer: In the Security Warning screens, click Run. When asked if
you want to run the file, click Run.

CHAPTER 3: SETUP FOR WINDOWS PC 19
•Firefox: Click Save File. In the Downloads list, double-click
SocketScan10Setup.exe. In the warning screen, click OK.
•Chrome: Click Save at the bottom of the screen. Click on the link for the
SocketScan10Setup.exe file. In the Security Warning screen, click Run.
3. Follow the installation wizard to install software for Windows Desktop.
If a previous version of SocketScan 10 is already installed on your
computer, and you choose to uninstall it, make sure SocketScan 10 is not
running before you start the uninstall. When prompted, make sure you
restart your computer.
4. A message will state that on the next screen, you will need to configure an
incoming Bluetooth serial COM port to connect with the CHS. Click Yes.

CHAPTER 3: SETUP FOR WINDOWS PC 20
5. The SocketScan Settings screen will appear.
•Select the incoming Bluetooth serial COM port that you would like SocketScan
to use to connect to the CHS.
•In most cases, Use keyboard wedge and Show keyboard wedge icon in
tray should both be selected.
Click Ports if a suitable incoming Bluetooth COM port is not listed and
you would like to add one. Also, if SocketScan Settings lists multiple COM
ports, you can determine if any are already paired to a Socket Bluetooth
barcode scanner and/or which one is incoming.
For the Toshiba Bluetooth stack, to determine which COM port is incoming,
click Ports. Incoming COM ports will be listed as LocalCOM-Server.
For most users, Use keyboard wedge and Show keyboard wedge
icon in tray should be selected. For more information about the
keyboard wedge and VIN decode options, please see SocketScan Settings.
6. After making all your selections, click OK.
7. In the last screen of the installation wizard, click Finish. If prompted, restart your
computer.
After installation, a SocketScan 10 shortcut will appear on your desktop.
Click it to quickly launch SocketScan 10.