Socket 7Qi User manual

COMMAND BARCODES
2D IMAGER MODELS - 7Qi, 7Xi, 7XiRx
This document pertains to the following CHS Series 7:
Model P/N
7Qi Blue 8550-00081
7Qi Gray 8550-00078
7Qi Green 8550-00090
7Qi Red 8550-00080
7Qi White 8550-00082
7Qi Yellow 8550-00079
7Xi Gray 8550-00059
7XiRx White 8550-00060
The part number (P/N) is labeled inside the battery compartment for the CHS Series 7.
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Table of Contents
General Command Barcodes
Data Editing - Prex/Sufx
Rumble/Beep Modes
Language Settings
QX Stand Modes
Apple iOS Oscreen Keyboard
Advanced Users Only
1D Symbologies
2D Symbologies
Postal Symbologies
SCANNER MODES
3
5
6
7
8
9
10
13
17
20
23
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

INSTRUCTIONS: Scan command barcode(s) to quickly congure the barcode scanner.
Many of the command barcodes only work with a scanner in a particular Bluetooth mode as indicated
by the header row of each table.
All Bluetooth Connection Modes OK
Scan only with CHS in SPP or iOS Mode
Scan only with CHS in HID Mode
Symbologies
Make sure the CHS is not connected to a host computer or device before scanning a
command barcode!
To use the CHS on multiple hosts, perform the unpair sequence.
1.Power on the CHS.
2.Press and hold down the trigger button.
3.Press and hold down the power button.
4.After you hear 3 beeps, release both buttons.
By default, the CHS is in HID mode as a Keyboard device.
For scanners in Bluetooth SPP or iOS mode, you can alternatively congure some settings by using
the Scanner Settings app. You can download the app from iTunes, and Google Play.
GENERAL COMMAND BARCODES
3
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

4
Scan command barcode(s) to quickly congure the CHS. By default, the CHS is in HID mode as a Keyboard
device.
IMPORTANT! Make sure the CHS is not connected to a host computer / device before scanning a command
barcode!
Bluetooth Connection Mode (General)
HID-Keyboard (default)
Congures the CHS as a Keyboard class device
(required for Apple iOS / Mac OS, Nokia E71).
#FNC HID Acceptor 000000000000#
HID-Peripheral
Congures the CHS as a Peripheral class device
(optional for Windows and Android).
#FNC COD HID 000500#
SPP Mode
Changes the CHS to Bluetooth Serial Port Prole
(SPP) mode (optional for Windows and Android).
#FNC SPP Acceptor 000000000000#
iOS Mode
Changes the CHS 7Qi, 7Xi, 7XiRx to Apple iOS mode
(equivalent to SPP mode).
#FNC IOS ACCEPTOR 000000000000#
Factory Defaults
Factory Reset
Congures the CHS to revert all settings to factory
defaults. The CHS powers off after scanning this
barcode.
#FNB41FB970001#
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

5
You can congure the CHS to automatically add a sufx and/or prex to each scan of data.
Note: Scanning multiple commands in a single instance will overwrite (not append) the previous
command.
Character or Command to Insert Scan to Enable
Carriage Return Sufx
(Default)
#FNB 4160C100010D#
Tab Sufx
#FNB 4160C1000109#
Carriage Return & Line Feed Sufx
#FNB 4160C100020D0A#
Data As Is – No prex or sufx
#FNB 4160C10000#
DATA EDITING – PREFIX / SUFFIX
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

6
Important! Make sure the CHS is not connected to a host computer before scanning a command barcode.
*Barcodes only work for 7Xi/7Qi with Rev M and above. For Rev M and below refer to page 12.
Rumble/Beep Modes
Vibrate “On”
Enables CHS to vibrate to indicate
successful scan
#FNB01310001000100FA0000#
Vibrate “Off”
Disables CHS from vibrating to
indicate successful scan
#FNB013100010000#
Beep “On”
Enables CHS to vibrate to indicate
successful scan
#FNB01190E000100030078004B#
Beep “Off”
Disables CHS from beeping to
indicate successful scans
#FNB01190E000100000078004B#
RUMBLE/BEEP MODES
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

7
HID Keyboard Language Settings
Scan to Enable Language
English
#FNB41FBA10000#
French
#FNB41FBA10001#
German
#FNB41FBA10002#
Spanish
#FNB41FBA10003#
LANGUAGE SETTINGS
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

8
QX Stand Modes
Mobile Mode - Normal (default)* Scanning this
bar code will enable the scanner to enter mobile
mode. It will always be in manual trigger mode
even when placed in the stand or cradle.
*Scanner Factory Reset returns to Mobile Mode.
#FNB 41FBA50000#
Auto Mode (Presentation Mode)
Scanning this bar code will enable the scanner
to enter auto mode. When the scanner is in auto
mode, it will switch to presentation trigger mode
when it detects power on the cradle pins. When
the scanner is removed from the cradle it will re-
main in presentation trigger mode until the users
presses the trigger. At that point it will switch to
normal manual trigger mode. Auto Mode command
barcode is also printed on the product label.
#FNB 41FBA50003#
QX STAND MODES
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

9
APPLE IOS OSCREEN KEYBOARD
Apple iOS Onscreen Keyboard
Apple iOS Onscreen Keyboard and Beep Enabled (Default)
Congures the CHS to activate the iOS onscreen keyboard when connected to an iOS device and the CHS
power button is double-pressed.
Scan only with CHS in HID mode
Disable both Onscreen Keyboard and Beep
#FNB 41FBDA000C000000000000000000000000#
Enable Beep
#FNB 41FBDA000C000500000000000000000000#
Disable Beep
#FNB 41FBDA000C000100000000000000000000#
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

ADVANCED USERS ONLY
Bluetooth Connection Modes
*Barcodes only work for 7Xi/7Qi with Rev M and above. For Rev M and below refer to page 4.
HID Mode (default)
Congures the CHS to Human Interface Device
(HID) mode. The CHS will be discoverable as a
Keyboard to other Bluetooth devices.
Required for Apple iOS, Mac OS, Nokia E71.
#FNB00F40001#
HID-Keyboard (default)
Changes a CHS in HID-Peripheral mode to
HID-Keyboard mode.
Required for Mac OS and Nokia E71, optional
for Apple iOS.
#FNB0001000540#
HID-Peripheral
Changes a CHS in HID-Keyboard mode to
HID-Peripheral mode.
Optional for Windows and Android.
#FNB0001000500#
SPP Mode
Congures the CHS to Serial Port Prole (SPP)
mode.
Required for BlackBerry, optional for Windows
and Android.
#FNB00F40000#
iOS Mode
Changes a CHS 7Ci to iOS mode.
Required for Apple iOS applications developed
with SocketScan 10 SDK.
#FNB00F40002#
10
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Bluetooth Connection Mode (ADVANCED Users Only)
SPP Acceptor Mode
Changes the CHS to Bluetooth Serial Port Prole
(SPP) mode as an acceptor (waits for computer /
device to initiate connection).
#FNC SPP Acceptor 000000000000#
SPP Initiator Mode
Changes the CHS to Bluetooth Serial Port Prole
(SPP) mode as an initiator. Use barcode generating
software or website (e.g., http://barcode.tec-it.
com) to create a barcode with the following data:
#FNC SPP Initiator aabbccddeeff#
Where aabbccddeeff is the Bluetooth Device
Address of the computer / device you want to
connect the CHS to.
Recommended barcode (module) width: 2-3cm
N/A
Bluetooth Connection Roles — For SPP or iOS Mode Only Rumble/Beep Mode (Advanced Users)
Acceptor (default)
Congures the CHS to accept a Bluetooth
connection puts the CHS in discoverable mode.
#FNA#
Initiator
Congures the CHS to initiate a connection to a
computer / device with the Bluetooth Device
Address specied in the barcode.
The barcode must be formatted in Code 128 and
contain the data
#FNIaabbccddeeff#
such that aabbccddeeff is the Bluetooth Device
Address of the computer/device you want to
connect to the CHS.
Required for Windows when using SPP mode.
You must create a custom barcode for each comput-
er / device that you want to connect to the CHS.
Use barcode generating software or website (e.g.,
http://barcode.tec-it.com))
11
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

12
Data Mode Rumble/Beep Mode (Advanced Users)
Raw Mode
Congures the CHS to raw mode (i.e., all scan data
is sent as raw bytes instead of packets).
#FNB 41FB9B0000#
Packet Mode
Congures the CHS to packet mode (i.e., the CHS
encapsulates scan data into packets, with header
and tail information to ensure integrity of data
when received by host).
#FNB 41FB9B0001#
Rumble/Beep Mode (Advanced Users)
Congures the CHS to Beep, Flash the LED Green, and Vibrate after successfully decoding data
Scan only with CHS in HID mode
Enable Beep and Vibrate
#FNB 41FB990007#
Disable Beep and Vibrate
#FNB 41FB990002#
Disable Vibrate
#FNB 41FB990003#
Disable Beep
#FNB 41FB990006#
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable WITH BEEP Special Commands
for HID Mode Scan to Enable NO BEEP
#FNB4
1FBDA000C00060001010D000000000000#
Ctrl + Z
#FNB
41FBDA000C00020001011D000000000000#
#FNB
41FBDA000C000600010104000000000000#
Ctrl + A
#FNB
41FBDA000C000200010104000000000000#
#FNB
41FBDA000C00060001202B000000000000#
Shift + Tab
#FNB
41FBDA000C00020001202B000000000000#
#FNB
41FBDA000C000600010116000000000000#
Ctrl + S
#FNB
41FBDA000C000200010116000000000000#
13
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Important! Print out page to scan. Do not scan on screen.
*Default
Scan to Enable Symbologies Scan to Disable
Codabar
Code 93 / Code 93i
Interleaved
2 of 5
1D SYMBOLOGIES
14
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable Symbologies Scan to Disable
*EAN/UPC – UPC-E
*EAN/UPC – UPC-E
EAN/UPC – UPC-E1
*EAN/UPC – EAN 8
15
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable Symbologies Scan to Disable
Standard 2 of 5
GS1 DataBar (RSS)
*EAN/UPC – EAN-13
*Code 128 / GS1 128
16
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable Symbologies Scan to Disable
*Code 39
Code 11
17
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Important! Print out page to scan. Do not scan on screen.
*Default
Scan to Enable Symbologies Scan to Disable
Aztec
*Data
Matrix
(Required to scan
onscreen barcode in
Socket EZ Pair
for SPP mode)
MaxiCode
2D SYMBOLOGIES
18
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable Symbologies Scan to Disable
QR Code
MicroPDF417
*PDF417
GS1
Composite – CC-A/B
19
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19

Scan to Enable Symbologies Scan to Disable
GS1
Composite – CC-C
GS1
DataBar (RSS)
Limited
GS1
DataBar (RSS)
20
www.ime.de
ime mobile solutions GmbH • Borsigstraße 7-9 • D-93092 Barbing • [phone] • info@ime de • www ime de
29-03-19