Sodex Sport S30052 User manual

DESCRIPTION
Steel structure
Powder Coated
CONFORM
European norm
NF EN 1271
ASSEMBLY INSTRUCTIONS
VOLLEYBALL MOBILE POSTS,
TENSION BY CAPSTAN
PRODUCT REF :S30052 PAIR
Note: We recommend that the distance between two
pillars should not exceed 9.5m
ASSEMBLY TIME
The time to make the assembly of this volleyball post is estimated for 1 person, at 35minutes. (without
filling the counterweights).
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is recommended to:
- Check every week that all the bolts are correctly tightened.
- Fix paint defects if the unit has been damaged, using the adapted paint specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
WARRANTY
One full year parts and labour guarantee. Every claim regarding the condition of the delivered equipment
has to be done within the warranty period following receipt of the product.
The warranty will not apply to:
- Any degradation during transport.
- Any degradation due to poor maintenance.
- Any degradation due to use differing from which the product was intended.
- Any defect claimed after the end of the warranty period.
- Any damage due to a faulty installation or assembly of the product.

2
ASSEMBLY
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Phillips Screwdriver
GUIDING TO SAND (x2)
SS Screws M5x10
x16
SS Screws M5x10
STEP 1:
Open the caps and fill sand into the counterweight
STEP 2:
Close the caps
NECESSARY
ITEMS
x8
SS Screws M5x10

3
ASSEMBLY
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Wrench 17
NECESSARY
ITEMS
1- ASSEMBLAGE OF BASE AND COUNTERWEIGHT WITH WHEELS (x2)
x1
Capstan + hook S
x4
Turn-knob M8X20
Turn-knob M10x15
Counterweight
with wheels
Base
x2
Turn-knob M10X15
SS Screw M10x35
x10 x12
SS Washers 10
x1
Turn-knob M10x15
x2
Pulleys
x2
Pulley supports
x4
SS Round head
screws M8x15
x2
SS Lock nuts M10
Allen’s key 5mm
x4
Peg

4
ASSEMBLY
2- ASSEMBLAGE OF SECOND COUNTERWEIGHT (x2)
NECESSARY
ITEMS
Peg
x2
Peg
STEP 1
STEP 2
x2
Turn-knob M8X20
Turn-knob M8x20

5
ASSEMBLY
3- ASSEMBLY OF THE PULLEY SUPPORTS (x2)
NECESSARY
ITEMS
x2
SS Round head
screws M8x15
x1
Pulley supports
Repeat this step on the second post.
SS Round head
screws M8x15
NECESSARY
ITEMS
x1
Pulleys
SS Screw M10x35
x1 x2
SS Washers 10
x1
SS Lock nuts M10
Pulley
SS Screws M10x35 +
SS Washers 10 +
SS Lock nuts M10
Repeat this step on the second post.
4– ASSEMBLY OF THE PULLEYS (x2)

6
ASSEMBLY
NECESSARY
ITEMS
5- ASSEMBLAGE COUNTERWEIGHT ON POST AND THE PULLYES (x2)
Upper part of post
Lower part of post
SS Screws M10x35 +
SS Washers M10
Do the same with the other post
x4
SS Screw M10x35
x4
SS Washers 10

7
ASSEMBLY
6– NET TENSION
NECESSARY
ITEMS
Fix the net cord
to the U hook
Fix the net cord to
the S hook
STEP 1 STEP 2
x1
Capstan +
stainless steel hook
Adjust the height of net by taking the PVC turn-knob and
pull it downwards. When the net is at the right height, roll
the cord around the hook (at least 4 times) to block it
x1
Turn-knob M10
Turn-knob M10

NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1 S30052-011 F2 Upper parts
2 Lower parts 2 + 2 Plastic buble + carton 5 layers 23 1530x200x180
A2 S30052-041 BBase 2Plastic buble +
carton 2 layers 5.6 720x750x100
A3 S30052-042 BCounterweight with
wheels 1Plastic buble + carton 2 layers 9520x380x150
A4 S30052-05 CSecond counterweight 1Plastic buble +
carton 2 layers 8.5 520x200x150
A5 S30052-042 BCounterweight with
wheels 1Plastic buble +
carton 2 layers 9520x380x150
A6 S30052-05 CSecond counterweight 1Plastic buble +
carton 2 layers 8.5 520x200x150
ACCESSORIES IN CLEAR PVC BAG 1
Package
N° Ref Designation Description Qty Note
A1 BITH1035 +
LITA102220
SS Screw M10x35 +
SS Washers 10 8 + 8 Assemble posts on base
A1 Capstan + hook “S”, inox
D5, Lg 106mm 1 + 1 Assemble on post
A1 NVN10 Nylon cord D6 3m lg +
Turn knob M10 1 + 1 Assemble on post
ACCESSORIES IN CLEAR PVC BAG 2
Package
N° Ref Designation Description Qty Note
A2 Peg 4Assemble the two
counterweights
A2 NVN1015 Turn knob M10x15 2
Fix the
counterweights to the
bases
A2 NVN0820 Turn knob M8x20 4Fix the pegs to the
counterweights
VISA PACKING DEPARTMENT DATE :
PACKING LIST
VOLLEYBALL MOBILE POSTS,
TENSION BY CAPSTAN
PRODUCT REF S30052 Index J PAIR

ACCESSORIES IN CLEAR PVC BAG 2
Package
N° Ref Designation Description Qty Note
A2 PULYN30 Alu pulley D30 2Assembled on
support pulley
A2
BITH1035 +
LITA102220 +
TITD10
SS Screw M10x35 +
SS Washers 10 +
SS Lock nuts M10
2 + 4 + 2 Assembled on
support pulley
A2 Pulley support 2Fixed to the posts
A2 BITK0815 SS Round head screws
M8x15 4Fixed to the support pulley
PRE-ASSEMBLED ACCESSORIES
Package
N° Ref Designation Description Qty Note
A1 BNT7660 Slip ring for tube D76/60 2Assemble the upper &
lower parts
A1 DXI1M + MKI28 2 locking bolts Ø10 +
2 SS chains + 2 SS rings 2 + 2 + 2 Assembled on upper part
A1 NNT60 PVC cap D60 2Assembled on post
A2 NC34 Rubber cap D34 4Assembled on base
A3+A4
A5+A6 BITK0510 SS Screws M5x10 16 Assembled on counterweight
A3+A5 BXN06530 PVC wheel D65 4Mounted on the base
A3+A5
BTBI0860 +
LITA081815 +
TITD08
Threaded rod part BC
M8x60 + SS washer 8 +
SS Lock nuts M8
4 + 8 + 4
Assembled on
counterweight with
wheels
A3+A4
A5+A6 TC03 Rubber 3mm 8Paste on Second counterweight
A3+A4
A5+A6 Rubber U lg 480 mm 4Put at the end on the counterweight
VISA PACKING DEPARTMENT DATE :
PACKING LIST
VOLLEYBALL MOBILE POSTS,
TENSION BY CAPSTAN
PRODUCT REF S30052 Index J PAIR