Page 4 Subject to changes | © 2017 SOLARWATT GmbH | AZ-TM-PME-1164 | Rev 001 | Version: 07/2017
4.2 SOLARWATT EnergyManager
DANGER
The SOLARWATT EnergyManager should only be commissioned by a quali ed electri-
cian! There is a risk of electric shock!
Intended use
The product has been built using state-of-the-art technology and generally recognized
good engineering practices. However, damage to the device and other property may occur
if the device is used improperly or not as intended. The product is used for energy man-
agement in a household. Any use other than or beyond this intended use is considered
incorrect usage. The manufacturer/supplier is not liable for the resulting damages. The
owner solely bears the risk. The intended use also requires compliance with the operating
and installation manual and all other applicable documents.
General safety instructions
Installation of the product may only be carried out by a recognized skilled technician.
This person also assumes responsibility for the correct installation and commissioning.
Observe all safety instructions provided on the packaging and affi xed to the device when
working with the product. Check to ensure that there is no damage to the device, the
accessories and the mains adapter prior to commissioning and on a regular basis during
operation. In case of doubt, have an electrician inspect the equipment to ensure that it
is sound. If there is any damage to the product or repairs are needed, these tasks may
only be entrusted to authorized persons. Ensure that the appropriate mains adapter is
used and that the mains voltage of the unit matches the mains voltage in your country.
The product should only be operated with the mains adapter supplied. If a di erent 24 V
mains adapter is used, the manufacturer/supplier shall not be held liable for any resulting
damages. Do not open the EnergyManager or the mains adapter! Removal of or damage to
the housing may expose live parts and impair the function of the equipment.
Prevention of damage
The product is exclusively intended for installation in dry, dust-free indoor areas. Protect
the unit from dust, damp, moisture, aggressive substances and vapors. The ambient tem-
perature must lie between -10°C and +50°C. Do not touch any electronic components or
connections on the EnergyManager, because this may damage or destroy the equipment.
Ground before working on the device. When connecting the mains adapter, ensure that
the mains adapter is not placed in a warm environment in the immediate vicinity of a cold
environment and ensure suffi cient temperature equalization. Commissioning when there
is condensation on the equipment poses a life-threatening danger! If the product or mains
adapter is damaged or destroyed, it must immediately be decommissioned by a quali-
ed expert. Only operate the product when the device is in technically sound condition.
Always contact a quali ed technician when there are error messages on the device.
