SOLIS SWISS AIR User manual

User Manual
SWISS AIR
Type 3802
SINCE 1
908

s APPLIANCE DESCRIPTION s SAFETY INFORMATION
• Persons with limited physical, sensory or mental capabil-
ities, or persons without the appropriate knowledge or
experience, including children, may not use the appliance
unless they are supervised by a person responsible for their
safety or given instruction by such a person as to how the
appliance is to be used. In addition, they must understand
exactly what hazards may arise from the use of the appliance
and how it can be used in a safe manner. Cleaning and main-
tenance of the appliance may not be carried out by children
unless under supervision.
• Repairs to this appliance, including mains cable replacement,
may only be carried out by authorised service agents. Improper
repair work can be a source of danger to appliance users.
• When the appliance is used in a bathroom, unplug it after use
since the proximity of water presents a hazard even when the
appliance is switched off.
• We recommend the installation of a residual current circuit-
breaker to provide additional protection when using electrical
appliances. It is advisable to use a circuit-breaker with a nomi-
nal fault current of maximum 30 mA. Your local electrician can
advise you.
• Caution! Never operate this appliance near
bathtubs, wash basins or other vessels con-
taining water.
• Do not let children play with the appliance.
2 3
EN EN
B
E
C
D
G
A
F
A Removable hair filter
(please keep clean at all times)
B Cold air button
C Heat toggle switch
D Motor speed and ON/OFF toggle switch
E Suspension loop
F Styling nozzle
G Power cord with detangler
Note: Swiss version without detangler
Please keep the hair
dryer clean and always
remove dust and hair
to increase its life span.

54
EN EN
A Removable hair filter
•To remove sucked-in dust and hair from the hair filter, you can remove the hair
filter by gently turning it to the left. Do this only if the appliance is unplugged.
Use a brush to clean the hair filter. After cleaning, put the hair filter back in place
and lock it by turning it to the right. Only place the hair filter on the hair
dryer when dry! The appliance must only be used with the hair filter in
place! Regularly cleaning the hair filter greatly increases the life span of the hair
dryer.
B Cold air button
•Use the cold air button to increase the fullness and tone of your hair and to sta-
bilise your hairstyle. We recommend using the cold air button after drying and
brushing your hair.
C Heat toggle switch
•Use the upper toggle switch to choose from 3 different heat settings: cold, warm
and maximum heat. Please refer to the description given in the section “Switch-
ing the appliance on and setting heat and motor speed” on the next page.
D Motor speed and ON/OFF toggle switch
•Use the bottom toggle switch to choose between low and high motor speed
resp. switch the appliance off. Please refer to the description given in the section
“Switching the appliance on and setting heat and motor speed” on the next
page.
E Suspension loop
•The practical suspension loop can be used to store the hair dryer safely and
saving space.
F Styling nozzle
•Use this nozzle to accurately point the jet of hot or cold air at single strands of
hair or quickly dry your hair. The styling nozzle can also used while brushing.
G Power cord with detangler
•The detangler prevents the power cord from twisting and tangling up while the
hair dryer is in use.
s STARTING UP
•Please read all safety precautions and information carefully and keep this
manual for later reading.
SWITCHING THE APPLIANCE ON AND SETTING HEAT
AND MOTOR SPEED
•Use the two toggle switches to adjust heat and motor speed:
C Upper toggle switch: heat
D Lower toggle switch: motor speed and ON/OFF
CLEANING AND MAINTENANCE
•Always pull the plug before cleaning the appliance. Keep the appliance away
from water and keep it safe from dust, dirt and lint. Regularly remove and clean
the hair filter with a soft brush. After cleaning, reinstall the hair filter. Use only a
slightly damp cloth to wipe the appliance clean and dry it afterwards with a soft
cloth.
OVERHEATING PROTECTION
•The appliance is equipped with a safety thermostat and the heating element
automatically switches off if it overheats. The motor keeps running to cool the
heating element. After a short break, the heating element switches back on auto-
matically. You should still make sure that the air inlets and outlets are completely
free from dust and lint and, if necessary, clean the appliance with a dry cloth.
cold warm maximum heat
Appliance switched
off
Motor speed low Motor speed high

6
s DISPOSAL
EU 2012/19/EU
Information for correct disposal of the product in accordance with the Euro-
pean Directive EU 2012/19/EU.
At the end of its working life this equipment must not be disposed of as an house-
hold waste. It must be taken to special local community waste collection centres or
to a dealer providing this service. Disposing of electrical and electronic equipment
separately avoids possible negative effects on the environment and human health
deriving from an inappropriate disposal and enables its components to be recov-
ered and recycled to obtain significant savings in energy and resources. In order to
underline the duty to dispose of this equipment separately, the product is marked
with a crossed-out dustbin.
Solis of Switzerland Ltd reserves the right to carry out technical and visual changes
and modifications to improve the product at any time.
SOLIS HELPLINE
This item stands out due to its long-life cycle and reliability. Despite this though,
if a malfunction ever occurs, simply give us a call. Often a breakdown can be
easily and quickly remedied with the right tip or technique without having to
straight away send off the device for repair. We will give you all the advice and
practical support you require. The contact addresses can be found at the end of
this manual.
Keep the original packaging in a safe place so that you may use it in the
event that transportation or shipping of the product becomes necessary.
EN
s Solis customer service
Please contact us in advance of
sending in products for return
or repair. We will gladly give you
the respective address. Alter-
natively, you can simply visit
www.solis.com.
Schweiz /Suisse
Svizzera
Solis Produzione SA
Centro Solis
Via Penate 4
CH – 6850 Mendrisio
Adresse für Warenretouren
abweichend – siehe:
Adresse différente pour les
retours de produit – voir:
Indirizzo differente per resi
di merce - vedi:
www.solis.com
091 – 802 90 10
[email protected]
www.solis.ch
Deutschland
Solis Deutschland GmbH
Marienstrasse 10
D – 78054 Villingen-
Schwenningen
Adresse für Warenretouren
abweichend – siehe:
www.solis.com
0800 – 724 07 02
[email protected]
www.solis.de
Österreich
Solis Austria
Bruderhofstrasse 10
A – 6800 Feldkirch
Adresse für Warenretouren
abweichend – siehe:
www.solis.com
0800 – 22 03 92
[email protected]
www.solis.at
Nederland
Solis Benelux BV
Stadskade 318
NL – 7311 XX
Apeldoorn
Afwijkend adres voor
productretouren – zie:
www.solis.com
085 – 4010 722
[email protected]
www.solisonline.nl
België/Belgique
Belgien/Luxembourg
Solis Benelux BV
Stadskade 318
NL – 7311 XX
Apeldoorn
Address for return shipment of
goods differs – please refer to:
Afwijkend adres voor
productretouren – zie:
Adresse différente pour les
retours de produit – voir:
www.solis.com
+32 – (0)2 – 808 35 82
[email protected]
www.solis.be
International
Solis Produzione SA
Centro Solis
Via Penate 4
CH – 6850 Mendrisio
Switzerland
Address for return shipment of
goods differs – please refer to
www.solis.com
+41 – 91 – 802 90 10
[email protected]
www.solis.com