Solos SD-B147 User manual

Continuous operation for 2 mins at most after
pause for 18 mins
SKU: SD-B147
SOLOS Basic Standing Desk User Manual
154 lbs
100-240V
2
0.98"/s
28.0"
47.6"
39.4"-63.0"
19.7"-31.5"
0-40°C

Install Supporting beam(4)
Install transmission rod(5)
Install (5)&(2)(3),use 0.1X0.1’’/2.5X2.5mm wrench(D) to tighten(G).
Rotation angle does not exceed one
third of the circle
Loose screws on(4) with wrench 0.16’’x0.16’’/4x4mm(C),then
stretch supporting beam
Install the Feet
Install(1)&(2)(3) together,use 0.2’’x0.2’’/5x5mm wrench(C) to tighten the screws(A).
x8
0.2"x0.2"
Please adjust the support beam size(4)
according to table top size.
Tighten screws on supporting beam
with wrench0.16’’x0.16’’/4x4mm(C)
Install supporting beam on the column(2)(3),tighten
screw(B) with wrench 0.2’’x0.2’’/5x5mm(C)
x4
0.2"x0.2"0.16"x0.16"
0.1"x0.1"

x12
Install(8), use Allen key 0.1’’x0.1’’/2.5x2.5mm to tighten
the screws.
Attach adapter(7) onto the desk top by cable tie(10)
Connect all the cables onto the Adapter(7)
Install desktop with screw(F),use electric drill to tighten
Distance≤200mm
Install baffle(8)
Install desktop
Install(6)&(2)(3),use Allen key 0.2’’x0.2’’/5x5mm to tighten the screws(A).
Install Supporting plate(6)
Use the cable tie(10) to fix all the connection
cables on the desk to keep it clean.
x4
x12
x4
0.2"x0.2"
0.1"x0.1"

Adjust the desk downwards
Adjust the desk upwards
Press the UP button or DOWN button to lift or lower
the height of desk surface
Common fault treatment
Instruction
How to use handswitch
154 lbs;