SOLTEK SL-55F5 User manual
1
Notice to End Users
This User’s Guide & Technical Reference is for assisting system
manufacturers and end users in setting up and installing the mainboard.
Every effort has been made to ensure that the information in this manual is
accurate. Soltek Computer Inc. is not responsible for printing or clerical errors.
Information in this document is subject to change without notice and does not
represent a commitment on the part of Soltek Computer Inc.
Companies and products mentioned in this manual are for identification
purposes only. Product names appearing in this manual may or may not be
registered trademarks or copyrights of their respective companies.
SOLTECK COMPANY INC. PROVIDES THIS MANUAL “ASIS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR
CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. IN NO EVENT SHALL SOLTEK COMPUTER
INC. BE LIABLE FOR ANY LOSS OR PROFITS, LOSS OF BUSINESS,
LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS, OR FOR
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
OF ANY KIND, EVEN IF SOLTEK COMPUTER INC. HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM
ANY DEFECT OR ERROR IN THIS MASNUAL OR PRODUCT.
(C)Copyright 1999 Soltek Computer Inc. All rights reserved
WebSite
http
://www.soltek.com.tw
Edition :June 1999
Version :2.0
Model: SL – 55F5 / 55F1
2
CONTENT
CHAPTER 1 INTRODUCTION..................................................................4
FEATURES ..................................................................................................... 4
CPU......................................................................................................4
Chipset .................................................................................................4
L2 Cache ..............................................................................................4
Main Memory.......................................................................................4
BIOS.....................................................................................................5
Super I/O Function...............................................................................5
Onboard built-in AC97 Digital Audio Controller ................................ 5
Onboard built-in VGA Controller ........................................................5
Other Functions ...................................................................................5
MAINBOARD LAYOUT................................................................................... 6
CHAPTER 2 HARDWARE SETUP............................................................7
CPU SETTINGS ............................................................................................. 7
AMD K6-2 / K6-III CPUs Settings....................................................... 7
Cyrix / IBM 6x86MX, MII CPUs Settings ............................................8
IDT WinChip C6 /C6-2 CPUs Settings...............................................10
Intel Pentium / AMD K5 CPUs Settings............................................. 11
Intel Pentium MMX CPUs Settings....................................................12
VCORE VOLTAGE SETTINGS - SW2............................................................. 13
CPU RAT I O SETTINGS – SW2.....................................................................14
CPU CLOCK SETTINGS – SW1 ................................................................... 15
JUMPER SETTINGS ...................................................................................... 17
JFAN 1~2: Onboard FAN (12V) Connector .......................................17
JVIO: Single / Dual Voltage Select.....................................................17
JBAT1: Clear CMOS Data................................................................. 17
JWOL1: Wake On LAN.......................................................................17
JCD_IN1: CD-ROM Audio connector ...............................................17
CD_IN1: CD-ROM Audio connector................................................. 17
GAME / MIDI Port: ........................................................................... 17
MIC: Microphone Jack ......................................................................18
LINE IN: Audio in Jack......................................................................18
LINE / SPEAKER OUT: Audio out Jack ............................................18
RT2: Reserved.................................................................................... 18
J1 Switch Signal Summary................................................................. 19
J2 Switch Signal Summary................................................................. 20
CONNECTORS ............................................................................................. 21
3
SOFTWARE SETUP ....................................................................................... 22
Onboard AC97 Audio Codec Driver Installation...............................22
Onboard VGA Driver Installation......................................................22
CHAPTER 3 AWARD BIOS SETUP ........................................................23
STANDARD CMOS SETUP .......................................................................... 24
BIOS FEATURES SETUP .............................................................................. 26
CHIPSET FEATURES SETUP.......................................................................... 30
POWER MANAGEMENT SETUP .................................................................... 33
PNP/PCI CONFIGURATION SETUP............................................................... 36
LOAD SETUP DEFAULTS.............................................................................. 38
CPU SPEED SETTING............................................................................. 38
INTEGRATED PERIPHERALS ......................................................................... 39
SUPERVISOR/USER PASSWORD.................................................................... 42
IDE HDD AUTO DETECTION ..................................................................... 43
SAV E & EXIT SETUP ................................................................................... 43
EXIT WITHOUT SAV I N G .............................................................................. 43
4
Chapter 1
Introduction
Features
CPU
1. Supports Intel Pentium P54C/MMX (P55C) CPUs at 133 ~ 233 MHz
2. Supports Cyrix/IBM 6x86(L) CPUs at PR133+ ~ PR250+MHz and
6x86MX/MII CPUs at PR166+ ~ PR350+ MHz
3. Supports AMD K6-2 250 ~ 500Mhz and K6-III CPUs.
4. Supports IDT C6/C6-2 200 ~ 266MHz
5. Provides SOCKET 7 ZIF Socket
6. Supports 66/75/83/95/100/105/110/115/120/124 MHz CPU clock
Chipset
1. VIA VT8501 Apollo MVP4 chipset
2. PCI Rev 2.2, 5V, 33MHz interface compliant
3. AGP V2.0 compliant for 66(1X)/133(2X)MHz transfer modes
4. Onboard built-in AC97 Digital Controller
5. Onboard built-in VGA controller (share system memory)
L2 Cache
yOnboard supports 512K(55F5)/1MB(55F1) write back cache with
Pipelined Burst SRAMs
Main Memory
1. Memory range from 8MB (minimum) to 768MB(SDRAM) (maximum)
with DRAM Table Free configurations
2. Up to 256MB/Row support 16Mb, 64Mb, 128Mb, 256Mb SDRAM
technology
3. Supports SDRAM with 12/10/8ns speed
4. Supports 3 pcs 168pin DIMM sockets (3.3V Unbuffered and 4 clock
type)
5
BIOS
1. AWARD Plug and Play BIOS
2. Support APM V1.2 and ACPI V1.0 spec
3. Flash Memory for easy upgrade
Super I/O Function
1. Integrated USB V1.1 and Intel Universal HCI V1.1 controller with
three USB ports. Provide 3 USB connectors.
2. Supports 2 IDE channels with 4IDE devices (including ZIP/LS-120
devices)
3. Provides PCI IDE Bus Master function and supports Ultra ATA33/66
function
4. One floppy port
5. Two high speed 16550 FIFO UART ports
6. One parallel port with EPP/ECP/SPP capabilities
7. Support Legacy keyboard and PS/2 mouse connector
8. Built-in RTC, CMOS, keyboard controller on single I/O chip
9. Peripherals boot function (with ATX power)
Onboard built-in AC97 Digital Audio Controller
1. Integrated sound controller compatible with Sound Blaster Profor
Windows DOS box and real-mode DOS legacy compatibility
2. Standard V1.0 or V2.0 AC97 Codec interface
3. Plug and Play with 4 IRQ, 4DMA and 4 I/O space options for 4.
SoundBlaster Pro and MIDI hardware
5. Hardware assisted FM synthesis for legacy compatibility
Onboard built-in VGA Controller
1. Supports 2 to 8 MB of frame buffer located in system memory
2. Real time DVD MPEG-2 and AC-3 playback Video processor
3. Integrated 24-bits 230MHz true color DAC
4. Extended screen resolutions up to 1600 * 1200
5. DirectX6 and OpenGL ICD API
Other Functions
1. Micro ATX size 21.1cm x 24.4cm.
2. 3 PCI Master slots, 1 ISA slot.
3. Supports SCSI/CD-ROM Boot function.
4. Supports jumperless setting.
5. Supports Wake On Lan (WOL) function. **
6. Onboard built-in hardware monitor feature.
** For support WOL, the ATX power supply has to have at
least 5V/720mA standby current. **
6
Mainboard Layout
Mainboard default setting for AMD K6-2 350/100MHz CPU
JVIO
12
56
JBAT1
1
Li
Battery
IDE 2
FDD 1
IDE 1
PCI 1
PCI 2
PCI 3
ISA SLOT
JWOL1
JUSB2
CD_IN1
JCD_IN1
JFAN1
JFAN2
RT2
ATX Power
VGA1 COM1
COM2
LPT1
USB0
USB1
PS/2
K/B
GAME1
MIC LINE
IN
LINE
/ SPK
OUT
Socket 7
SW1
SW2
4
8
1
1
ON
ON
BIOS
J1
J2
P. B .
Cache
VIA
VT8501
VIA
VT82C686A
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
ON
U
p
U
p
Down
Down
HDD LED IR
SPK RST
PWR
PWR LED T/LED
SMI
1
55F5 layout
NOTE: 1. Adjust SW2 DIP1 ~ DIP4 for selecting Vcore Voltage.
2. Adjust SW2 DIP5 ~ DIP7 for selecting CPU Ratio.
3. SW2 DIP8 is unused. So user can ignore its position.
7
Chapter 2
Hardware Setup
CPUSettings
AMD K6-2 / K6-III CPUs Settings
ON
SW1
14
SW2
18
ON
6 4 2
5 3 1
JVIO
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
K6-III 450/100
SW2 SW1
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
K6-2 450/100
SW2 SW1
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
K6-III 400/100
SW2 SW1 ON
14
OFF
OFF
ON
ON
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
K6-2 475/95
K6-III 475/95
SW2 SW1
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
K6-2 500/100
K6-III 500/100
SW2 SW1
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
K6-2 380/95
SW2 SW1
ON
14
OFF
OFF
ON
ON
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
K6-2 400/100
SW2 SW1
ON
18
OFF
OFF
OFF
OFF
OFF
OFF
ON
K6-2 333/95
SW2 SW1
ON
14
OFF
OFF
ON
ON
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
K6-2 300/100
SW2 SW1
ON
14
OFF
ON
ON
ON
ON
18
OFF
OFF
OFF
OFF
OFF
OFF
ON
K6-2 350/100
ON
14
OFF
ON
ON
ON
SW2 SW1
JVIO
5 1
6 2
8
Cyrix / IBM 6x86MX, MII CPUs Settings
ON
SW1
14
SW2
18
ON
(66MHz X 3.5)
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
14
OFF
OFF
OFF
ON
SW2 SW1
(75MHz X 3.0)
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
(95MHz X 2.5)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
MII-300
(100MHz X 2.5)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
ON
ON
ON
SW2 SW1
(83MHz X 3.5)
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
(75MHz X 4.0)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
MII-366
MII-333
(66MHz X 4.0)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
OFF
OFF
ON
SW2 SW1
(83MHz X 3.0)
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
(100MHz X 2.5)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
ON
ON
ON
SW2 SW1
(75MHz X 3.5)
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
6 4 2
5 3 1
JVIO
JVIO
5 1
6 2
9
Cyrix / IBM -1
ON
SW1
14
SW2
18
ON
(95MHz X 4.0)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
MII-450
(100MHz X 4.0)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
ON
ON
ON
SW2 SW1
MII-466
(100MHz X 3.5)
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
14
OFF
ON
ON
ON
SW2 SW1
MII-433
(83MHz X 4.0)
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
(95MHz X 3.5)
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
MII-400
(100MHz X 3.0)
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
ON
14
OFF
ON
ON
ON
SW2 SW1
MII-380
(95MHz X 3.0)
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
ON
14
OFF
OFF
ON
ON
SW2 SW1
MII-350
6 4 2
5 3 1
JVIO
JVIO
5 1
6 2
Cyrix / IBM –2
10
IDT WinChip C6 /C6-2 CPUs Settings
ON
SW1
14
SW2
18
ON
ON
18
OFF
OFF
OFF
ON
ON
ON
ON
C6-233(66MHz X 3.5)
SW2 SW1
ON
14
OFF
OFF
OFF
ON
ON
18
OFF
OFF
ON
ON
ON
ON
ON
C6-225(75MHz X 3)
SW2 SW1
ON
14
OFF
OFF
ON
ON
ON
18
OFF
ON
ON
ON
ON
ON
ON
C6-240(60MHz X 4.0)
ON
14
OFF
OFF
OFF
OFF
SW2 SW1
ON
18
OFF
ON
ON
ON
ON
ON
ON
C6-2 266(100MHz X 5.0)
ON
14
OFF
ON
ON
ON
SW2 SW1
6 4 2
5 3 1
JVIO
JVIO
5 1
6 2
11
Intel Pentium / AMD K5 CPUs Settings
ON
SW1
14
SW2
18
ON
ON
18
OFF
OFF
ON
ON
ON
ON
ON
Pentium-200
K5-PR200
SW2 SW1
ON
14
OFF
OFF
OFF
ON
ON
18
OFF
ON
ON
ON
ON
ON
ON
Pentium-166
K5-PR166
SW2 SW1
ON
14
OFF
OFF
OFF
ON
ON
18
OFF
OFF
ON
ON
ON
ON
ON
Pentium-133
K5-PR133
ON
14
OFF
OFF
OFF
ON
SW2 SW1
6 4 2
5 3 1
JVIO
JVIO
5 1
6 2
12
Intel Pentium MMX CPUs Settings
ON
SW1
14
SW2
18
ON
ON
18
OFF
OFF
OFF
OFF
OFF
ON
ON
Pentium MMX-200
SW2 SW1
ON
14
OFF
OFF
OFF
ON
ON
18
OFF
OFF
OFF
OFF
ON
ON
ON
Pentium MMX-166
SW2 SW1
ON
14
OFF
OFF
OFF
ON
ON
18
OFF
OFF
OFF
OFF
OFF
OFF
ON
PentiumMMX-233
ON
14
OFF
OFF
OFF
ON
SW2 SW1
6 4 2
5 3 1
JVIO
JVIO
5 1
6 2
13
VcoreVoltageSettings-SW2
Vcore SW2
DIP1 ~ DIP4
18
ON
ON
OFF
OFF
OFF
18
ON
ON
OFF
OFF
OFF
18
ON
ON
ON
OFF
OFF
18
ON
ON
ON
OFF
OFF
18
ON
ON
ON
OFF
OFF
18
ON
ON
OFF
OFF
OFF
18
ON
ON
ON
ON
OFF
OFF
14
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
8
ON
OFF
OFF
OFF
OFF
2.1V
2.2V
2.3V
2.4V
2.5V
2.6V
2.7V
2.0V
Vcore SW2
DIP1 ~ DIP4
18
ON
ON
ON
ON
18
ON
ON
ON
ON
ON
18
ON
ON
OFF
OFF
OFF
18
ON
ON
ON
OFF
OFF
ON
18
ON
ON
OFF
OFF
18
ON
ON
ON
ON
OFF
18
ON
ON
ON
OFF
OFF
18
ON
ON
ON
ON
OFF
2.9V
3.0V
3.1V
3.2V
3.3V
3.4V
3.5V
2.8V
NOTE: 1. Adjust SW2 DIP1 ~ DIP4 for selecting Vcore Voltage.
2. Adjust SW2 DIP5 ~ DIP7 for selecting CPU Ratio.
3. SW2 DIP8 is unused. So user can ignore its position.
14
CPURatioSettings–SW2
1567
567
567
567
567
567
567
567
567
8
ON
OFF
OFF
OFF
18
ON
ON
ON
ON
18
ON
ON
OFF
OFF
18
ON
ON
ON
OFF
18
ON
ON
OFF
OFF
18
ON
OFF
OFF
OFF
18
ON
ON
ON
OFF
18
ON
ON
ON
OFF
18
ON
ON
OFF
OFF
1.5x
2.0x
2.5x
3.0x
3.5x
Ratio
4.0x
4.5x
5.0x
5.5x
Ratio
SW2
DIP5 ~ DIP7
SW2
DIP5 ~ DIP7
NOTE: 1. Adjust SW2 DIP1 ~ DIP4 for selecting Vcore Voltage.
2. Adjust SW2 DIP5 ~ DIP7 for selecting CPU Ratio.
3. SW2 DIP8 is unused. So user can ignore its position.
15
CPUClockSettings–SW1
CPU Clock PCI Clock
60
66.8
70
75
80
83.3
95
100
30
33.4
35
25
26.6
27.7
33.3
SW1
14
ON
ON
ON
ON
OFF
14
ON
ON
ON
OFF
OFF
14
ON
OFF
OFF
OFF
OFF
14
ON
ON
OFF
OFF
OFF
14
ON
ON
ON
OFF
OFF
14
ON
ON
ON
OFF
OFF
14
ON
ON
OFF
OFF
OFF
14
ON
ON
OFF
OFF
OFF
(CPU Clock /2)
(CPU Clock /2)
(CPU Clock /2)
(CPU Clock /2)
(CPU Clock /3)
(CPU Clock /3)
(CPU Clock /3)
(CPU Clock /3)
SW1-1
16
75
80
83.3
105
110
115
120
124
37.5
40
41.6
35
36.6
38.3
41.3
SW1
CPU Clock PCI Clock
14
ON
ON
ON
ON
ON
14
ON
ON
ON
ON
OFF
14
ON
ON
OFF
OFF
OFF
14
ON
ON
ON
OFF
OFF
14
ON
ON
ON
ON
OFF
14
ON
ON
ON
ON
OFF
14
ON
ON
ON
OFF
OFF
14
ON
ON
ON
OFF
OFF
(CPU Clock /2)
(CPU Clock /2)
(CPU Clock /2)
(CPU Clock /3)
(CPU Clock /3)
(CPU Clock /3)
(CPU Clock /3)
(CPU Clock /2)
SW1-2
17
JumperSettings
JFAN 1~2: Onboard FAN (12V) Connector
FAN# Function
JFAN1 CPU FAN
JFAN2 System FAN
JVIO: Single / Dual Voltage Select
Status JVIO
Single Voltage
For P54C / K5 / 6x86 CPUs
6 4 2
5 3 1
Dual Voltage
For MMX / 6x86L / MII / K6
/ K6-2 / K6-III CPUs
6 4 2
5 3 1
JBAT1: Clear CMOS Data
Status JBAT1
Hold CMOS Data
(Default)
31
Clear CMOS Data
31
JWOL1: Wake On LAN
connect the network card to WOL signal connector.
JCD_IN1: CD-ROM Audio connector
Connect JCD_IN1 to the CD-ROM Audio Connector.
CD_IN1: CD-ROM Audio connector
Connect CD_IN1 to the CD-ROM Audio Connector.
GAME / MIDI Port:
Connect Joystick or MIDI device to this port.
18
MIC: Microphone Jack
LINE IN: Audio in Jack
LINE / SPEAKER OUT: Audio out Jack
RT2: Reserved
19
J1 Switch Signal Summary
J1 Pin Signal Description
1 +5V
2 HDD LED Signal
3 HDD LED Signal
HDD LED Connector
4 +5V
N.C. 5 No Connection
6 Infrared Transmit Signal
7 GND
8 Infrared Receive Signal
(low speed)
9 Infrared Receive Signal
(high speed)
Infrared Connector
10 +5V
N.C. 11 No Connection
12 5V Standby
PWR 13 Power Switch
14 SMI Signal
SLEEP 15 GND
J1pin1~pin4:IDELEDActivityLight
This connector connects to the hard disk activity indicator light on the case.
J1 pin6 ~ pin10: Infrared Port Module Connector
The system board provides a 5-pin infrared connector-R1 for an optional
wireless transmitting and receiving module. Pin 6 through pin 10 are Transmit,
GND, Receive (low speed), Receive (high speed), and Vcc, Respectively.
J1pin12,pin13:ATXPowerSwitch
Toggle this pin for turning on/off the ATX Power Supply.
J1pin14,pin15:SleepSwitch
Toggle this jumper force the system to sleep and the system won’t wake up
until the hardware event is coming. (the BIOS Power Management setting
must be Enabled.)
20
J2 Switch Signal Summary
J2 Pin Signal Description
1 Speaker Signal
2 No Connection
3 Ground
Speaker Connector
4 +5V
5 Reset Signal
Reset Switch 6 Ground
N.C. 7 No Connection
8 +5V
9 No Connection
Power LED Connector
10 Ground
11 No Connection
N.C. 12 No Connection
N.C. 13 No Connection
14 Turbo LED Connector
Turbo LED Connector 15 Ground
J2 pin1 ~ pin4: Speaker Connector
The speaker connector is a 4-pin connector for connecting the system and the
speaker.
J2 pin5, pin6: Reset Switch
The system board has a 2-pin connector for rebooting your computer without
having to turn off your power switch. This prolongs the life of the system’s
power supply.
J2pin8~pin10:PowerLED
See the following drawing for jumper position, and pin8 ~ pin10 is connected
to power LED.
J2pin14~pin15:TurboLED
This manual suits for next models
1
Table of contents
Other SOLTEK Motherboard manuals
SOLTEK
SOLTEK SL-85DRV+ User manual
SOLTEK
SOLTEK SL-75KAV User manual
SOLTEK
SOLTEK SL-75KAV User manual
SOLTEK
SOLTEK SL-75DRV5 User manual
SOLTEK
SOLTEK SL-67B-W User manual
SOLTEK
SOLTEK SL-75KV User manual
SOLTEK
SOLTEK SL-54A2 User manual
SOLTEK
SOLTEK SL-75DRV3/75DRV3+ User manual
SOLTEK
SOLTEK 65kv User manual
SOLTEK
SOLTEK SL-85MIR3 User manual
SOLTEK
SOLTEK SL-67EV1 Use and care manual
SOLTEK
SOLTEK SL-63AV Use and care manual
SOLTEK
SOLTEK SL-53D5-S Use and care manual
SOLTEK
SOLTEK SL-56D1 User manual
SOLTEK
SOLTEK SL-845GVI User manual
SOLTEK
SOLTEK 75FRV User manual
SOLTEK
SOLTEK SL-B8E-FG User manual
SOLTEK
SOLTEK SL-65MV Use and care manual
SOLTEK
SOLTEK SL-865G3 User manual
SOLTEK
SOLTEK SL-865G User manual
Popular Motherboard manuals by other brands
JETWAY
JETWAY For Socket 370 user manual
IBASE Technology
IBASE Technology MI912 user manual
Supermicro
Supermicro X11DPU user manual
iWave
iWave iW-RainboW-G20D Hardware user's guide
Intel
Intel BLKD915PGNL - LGA775 800FSB 4DDR Audio Lan SATA ATX... Technical product specification
Advantech
Advantech AIMB-585 user manual