Sony ericsson Hbh-gv435a User manual

Bluetooth™

Headset

HBH-GV435a

English

Language

O

Bluetooth™

Headset

HBH-GV435a

User Guide

Sony Ericsson HBH-GV435a

This manual is published by Sony Ericsson Mobile Communications

AB, without any warranty. Improvements and changes to this manual

necessitated by typographical errors, inaccuracies of current

information, or improvements to programs and/or equipment, may be

made by Sony Ericsson Mobile Communications AB at any time and

without notice. Such changes will, however, be incorporated into new

©Sony Ericsson Mobile Communications AB, 2007

Publication number: 1202-4342.P1C

Some of the services in this manual are not supported by all networks.

This also applies to the GSM International Emergency Number 112.

Contact your network operator or service provider if you are in doubt

whether you can use a particular service or not.

The Bluetooth word mark and logos are owned by the Bluetooth SIG,

Inc. and any use of such marks by Sony Ericsson is under license.

This product is leadfree and halogenfree.

P

Introduction

Bluetooth™ Headset HBH-GV435a

The Bluetooth™ Headset HBH-GV435a can be

connected to any device with Bluetooth wireless

technology that supports the handsfree or headset profile.

This user guide focuses on usage with a Sony Ericsson

mobile phone.

Bluetooth™ Headset HBH-GV435a

The Bluetooth™ Headset HBH-GV435a can be

connected to any device with Bluetooth wireless

technology that supports the handsfree or headset profile.

This user guide focuses on usage with a Sony Ericsson

mobile phone.

Bluetooth™ Headset HBH-GV435a

The Bluetooth™ Headset HBH-GV435a can be

connected to any device with Bluetooth wireless

technology that supports the handsfree or headset profile.

This user guide focuses on usage with a Sony Ericsson

mobile phone.

Bluetooth™ Headset HBH-GV435a

The Bluetooth™ Headset HBH-GV435a can be

connected to any device with Bluetooth wireless

technology that supports the handsfree or headset profile.

This user guide focuses on usage with a Sony Ericsson

mobile phone.

Q

Increase volume

Call handling button

Decrease volume

Indicator light (LED)

Microphone

Power button

R

Speaker

Charging connector

S

User Guide symbols

Press and release

Press twice within 1/2 second

Press and hold

Press and hold simultaneously

Steady red light

Steady green light

T

User Guide symbols (continued)

First time use: Charge until the LED turns green.

Red flash

Green flash

Beep tone

Ring signal

U

Getting started

Charging

Fully charged

Charging

Battery needs charging

V

Adding the headset to the phone

Before you can use your Bluetooth headset with your

phone it has to be added once to the phone. Follow the

instructions from the phone user guide on how to turn on

Bluetooth in your phone.

1. Turn on Bluetooth in your phone.

2. Turn on Bluetooth visibility in your phone. This makes

your phone visible to other Bluetooth devices.

3. Prepare your headset according to page 14.

4. If your phone supports auto pairing, press YES when

Add device? appears in your phone to complete the

procedure. If not, continue with step 5.

20 cm

NM

5. Prepare your phone according to the phone user

guide on how to add a Bluetooth device. Please

note that for some phones you may need to enter a

passcode. The headset passcode is 0000.

After you have added the headset to the phone, it will

automatically connect to the phone as soon as it is turned

on and within range.

Before you can use your Bluetooth headset with your

phone it has to be added once to the phone. Follow the

instructions from the phone user guide on how to turn on

Bluetooth in your phone.

1. Turn on Bluetooth in your phone.

2. Turn on Bluetooth visibility in your phone. This makes

your phone visible to other Bluetooth devices.

3. Prepare your headset according to page 14.

The headset beeps and flashes green when successfully added

NN

4. If your phone supports auto pairing, press YES

when Add device? appears in your phone to

complete the procedure. If not, continue with step

5.

5. Prepare your phone according to the phone user guide

on how to add a Bluetooth device. Please note that for

some phones you may need to enter a passcode. The

headset passcode is 0000.

After you have added the headset to the phone, it will

automatically connect to the phone as soon as it is turned

on and within range.

Before you can use your Bluetooth headset with your

phone it has to be added once to the phone. Follow the

instructions from the phone user guide on how to turn on

Bluetooth in your phone.

1. Turn on Bluetooth in your phone.

2. Turn on Bluetooth visibility in your phone. This makes

your phone visible to other Bluetooth devices.

The headset beeps and flashes green when successfully added

NO

3. Prepare your headset according to page 14.

4. If your phone supports auto pairing, press YES

when Add device? appears in your phone to complete

the procedure. If not, continue with step 5.

5. Prepare your phone according to the phone user guide

on how to add a Bluetooth device. Please note that for

some phones you may need to enter a passcode. The

headset passcode is 0000.

After you have added the headset to the phone, it will

automatically connect to the phone as soon as it is turned

on and within range.

Before you can use your Bluetooth headset with your

phone it has to be added once to the phone. Follow the

The headset beeps and flashes green when successfully added

NP

instructions from the phone user guide on how to

turn on Bluetooth in your phone.

1. Turn on Bluetooth in your phone.

2. Turn on Bluetooth visibility in your phone. This makes

your phone visible to other Bluetooth devices.

3. Prepare your headset according to page 14.

4. If your phone supports auto pairing, press YES when

Add device? appears in your phone to complete the

procedure. If not, continue with step 5.

5. Prepare your phone according to the phone user guide

on how to add a Bluetooth device. Please note that for

some phones you may need to enter a passcode. The

headset passcode is 0000.

After you have added the headset to the phone, it will

automatically connect to the phone as soon as it is turned

on and within range.

The headset beeps and flashes green when successfully added

NQ

Prepare the headset

Make sure the headset is turned off (see page 17).

Make sure the indicator light flashes red and green

NR

Optimal range and wearing

Objects, walls and a greater distance than 5 m can effect the sound.

Wear your headset on the same side of your body as your phone for

best performance.

Objects, walls and a greater distance than 5 m can effect the sound.

Wear your headset on the same side of your body as your phone for

best performance.

Objects, walls and a greater distance than 5 m can effect the sound.

Wear your headset on the same side of your body as your phone for

best performance.

Objects, walls and a greater distance than 5 m can effect the sound.

Wear your headset on the same side of your body as your phone for

best performance.

NS

Putting the headset on

Make sure you twist the speaker round into your ear.

Left and right ear use

NT

Calling

Turning the headset on

Turning the headset off

(5 s)

(2

S

)

(5 s)

(2

S

)

pçåó=bêáÅëëçå=jçÄáäÉ=`çããìåáÅ~íáçåë=^_

pbJOON=UU=iìåÇI=pïÉÇÉå

ïïïKëçåóÉêáÅëëçåKÅçã

e_eJdsQPR~

NOMOJQPQO=mN`

mêáåíÉÇ=áå=uuuu

NV

Answering a call

OM

Making a call

Sony Ericsson HBH-GV435a User manual

Popular Headset manuals by other brands