Sony Ericsson HBH-DS980 User manual

Stereo Bluetooth™ Headset
HBH-DS980
English
Hrvatski
Slovenčina
Slovenščina
This is the Internet version of the User’s guide. © Print only for private use.

1
Contents
English ......................................................... 3
Hrvatski ..................................................... 21
Slovenčina ................................................. 39
Slovenščina ............................................... 60
Declaration of conformity ........................ 78
This is the Internet version of the User’s guide. © Print only for private use.

3
English
Introduction.................................................. 5
Getting started ............................................. 9
Listening to music......................................11
Calling functions ....................................... 14
Troubleshooting ........................................ 17
Viewing regulatory information................ 20
Sony Ericsson HBH-DS980
This User guide is published by Sony Ericsson Mobile
Communications AB or its local affiliated company, without
any warranty. Improvements and changes to this User guide
necessitated by typographical errors, inaccuracies of current
information, or improvements to programs and/or equipment,
may be made by Sony Ericsson Mobile Communications AB or
its local affiliated company at any time and without notice. Such
changes will, however, be incorporated into new editions of this
User guide. All rights reserved.
©Sony Ericsson Mobile Communications AB, 2007
Publication number: LZT 108 9295/6 R1A
Some of the services in this User guide are not supported by all
networks. This also applies to the GSM International Emergency
Number 112. Contact your network operator or service provider if
you are in doubt whether you can use a particular service or not.
This is the Internet version of the User’s guide. © Print only for private use.

4
The liquid identity logo is a trademark or a registered trademark of
Sony Ericsson Mobile Communications AB. Sony is a trademark
or a registered trademark of Sony Corporation. Ericsson is a
trademark or a registered trademark of Telefonaktiebolaget LM
Ericsson.
The Bluetooth word mark and logos are owned by the Bluetooth
SIG, Inc. and any use of such marks by Sony Ericsson is under
license.
This product is leadfree and halogenfree.
This is the Internet version of the User’s guide. © Print only for private use.

5
Introduction
The Stereo Bluetooth™ Headset HBH-DS980 lets you
stay in control of your incoming and outgoing phone
calls. You can enjoy stereo audio from a phone or other
Bluetooth device, such as a computer or a portable
music player. When you receive or make a call, the
music automatically pauses and starts playing again
when the call ends.
For full functionality, your phone or other device should
support the following Bluetooth profiles:
•Bluetooth Handsfree
•Bluetooth Headset
•Bluetooth Advanced Audio Distribution
•Bluetooth Audio/Video Remote Control
•Bluetooth PhoneBook Access
See the Bluetooth Handsfree Important Information
guide for more information about safe and efficient use.
This is the Internet version of the User’s guide. © Print only for private use.

6
Overview
Call handling key
and microphone
Right earpiece (removable
ear cushion)
Left earpiece
(removable ear
cushion)
Cord length
adjustment
Safety release
This is the Internet version of the User’s guide. © Print only for private use.

7
Keys and display
Volume u p
Previous track
Volume down
On/off key
Display
Music key
Next track
Menu key
This is the Internet version of the User’s guide. © Print only for private use.

8
Display information
Battery status. Animated when
charging
The headset is on
The headset is prepared to be paired
with a phone
The headset is successfully paired with
a phone or other device
Incoming call
Outgoing call
Ongoing call
Missed call
Contacts menu
Contacts not available or empty
Call list menu
Call list not available or empty
Device list menu
The phone used for making calls
Voice control is activated
The microphone is muted
Connecting to a phone or other device
Music mode
This is the Internet version of the User’s guide. © Print only for private use.

9
Getting started
To charge the headset
First time use: Charge approximately 8 hours before
using the headset.
Pairing the headset with the phone
Before you can use the headset with your phone it has
to be paired once with the phone. Follow the
instructions in the phone User guide on how to turn on
Bluetooth in your phone.
Adjusting the ringtone volume
(in standby) or the music volume
(in music mode)
Adjusting the voice volume
This is the Internet version of the User’s guide. © Print only for private use.

10
To pair the headset with the phone
1 Turn on Bluetooth in your phone.
2 Turn on Bluetooth visibility in your phone, and
keep it close to the headset, 20 cm (7 inch) or less.
3 Make sure the headset is off.
4 On the headset, press and hold down the on/off key
until the display shows .
5 If your phone supports auto pairing, press YES
when Add device? appears in your phone to
complete the procedure. If not, continue with step 6.
6 Prepare your phone according to the phone User
guide on how to pair a Bluetooth device. You may
need to enter a passcode (0000). When appears,
the headset is ready to use.
To turn the headset on
•Press and hold down the on/off key until
Sony Ericsson appears.
To turn the headset off
•Press and hold down the on/off key until
Sony Ericsson disappears.
To light up the display
•Press the menu key or on/off key. The display turns
off automatically.
This is the Internet version of the User’s guide. © Print only for private use.

11
To reset the headset to default settings
1 Switch the headset off.
2 Press and hold down the on/off key until the display
shows .
3 Press and hold down the on/off key and the call
handling key simultaneously until the headset is
turned off.
Listening to music
Before you can listen to music, the headset has to be
paired once with your phone. See “To pair the headset
with the phone” on page 10. You can also use the
headset with other devices, for example, a computer
or a portable music player.
This is the Internet version of the User’s guide. © Print only for private use.

12
To play or stop the music
•Press the music key on the headset to start or stop
the music.
To skip to another music track
•Select the next or previous track key.
To adjust the music volume
•When you listen to music, press the volume up or
down key.
Using another device as a music source
Before you can listen to music from another device,
the headset has to be paired once with the device. The
headset can be paired with up to ten devices. When you
press the music key, the headset connects to the most
recently used music device.
Note: If the last used music device is not within range,
you have to select another device in the device list.
See “To select another device as a music source” on
page 14.
This is the Internet version of the User’s guide. © Print only for private use.

13
To pair the headset with another device
1 Turn on Bluetooth in your device.
2 Turn on Bluetooth visibility in your device, and
keep it close to the headset, 20 cm (7 inch) or less.
3 In the headset, press and hold down the on/off key
until the display shows . The headset is
prepared to be paired.
4 Prepare your device according to the device User
guide on how to pair a Bluetooth device. You may
need to enter a passcode. The headset passcode is
0000.
This is the Internet version of the User’s guide. © Print only for private use.

14
To select another device as a music source
1 When the headset is on and paired with several
devices, press and hold down the menu key until
the menu icons appear.
2 Press the volume key to scroll to .
3 Press the music key to enter the device list.
4 Scroll to a device and press the music key.
Tip: To return to a previous menu level, press the
menu key.
Calling functions
Your phone uses the headset for calls, even if you are
listening to music from another device. You can pair
and connect several phones to the headset, and receive
calls from any of them.
Note: Objects, walls and a greater distance than
5 metres (16.5 feet) can affect the sound. Wear your
headset on the same side of your body as your phone
for best performance.
To answer a call
•Press the call handling key.
To reject a call
•Press and hold down the call handling key until
you hear a beep.
This is the Internet version of the User’s guide. © Print only for private use.

15
To end a call
•Press the call handling key. The display shows the
duration of the call. A call on hold is connected again.
To answer a second call
•Press the call handling key. The ongoing call is put
on hold.
To switch between two calls
•Press and hold down the call handling key until you
hear a beep.
To make a call using phone contacts
1 Press and hold down the menu key until the menu
icons appear.
2 Press the volume key to scroll to .
3 Press the call handling key to enter your contacts.
4 Scroll the alphabetical list with the volume key, and
press the call handling key to select the first letter of
the contact.
5 Scroll the contacts with the volume key, and press
the call handling key to select a contact.
6 If a contact has more than one number, scroll the
numbers with the volume key.
7 Press the call handling key to call the number.
Tip: To return to a previous menu level, press the menu
key. To select an item, you can also press the music key.
This is the Internet version of the User’s guide. © Print only for private use.

16
To make a call using the call list
1 Press and hold down the menu key until the menu
icons appear.
2 Press the volume key to scroll to .
3 Press the call handling key to enter the call list.
4 Scroll the list with the volume key, and press the
call handling key to call a number.
Tip: To return to a previous menu level, press the menu
key. To select an item, you can also press the music key.
To make a call using voice commands
1 Press the call handling key.
2 After the beep: Say the name you want to call.
Note: To be able to use this function, you first have to
activate voice control in your phone and record voice
commands. For more information on voice commands,
and if your phone supports it, see the phone User guide.
To transfer sound from phone to headset
•During an ongoing call in your phone, press the
call handling key on the headset. To transfer from
headset to phone, see the phone User guide.
To turn the microphone on or off (mute)
•During a call, press both volume keys
simultaneously.
To adjust the ringtone volume
•When you have no ongoing call or music playing,
press the volume key up or down.
This is the Internet version of the User’s guide. © Print only for private use.

17
To adjust the speaker volume for calls
•During a call, press the volume key up or down.
To select another phone for outgoing calls
1 When the headset is on and paired with several
phones, press and hold down the menu key until
the menu icons appear.
2 Press the volume key to scroll to .
3 Press the call handling key to enter the device list.
4 Scroll to a phone and press the call handling key.
The phone you have selected now is the one you
will use for outgoing calls. It is indicated by
before the phone name in the device list.
Tip: To return to a previous menu level, press the
menu key.
Note: If you pair a new phone with the headset, the
new phone will automatically be the one used for
outgoing calls. Incoming calls can be received from all
phones paired with the headset, and which are in range.
Troubleshooting
No connection to phone or other device
•Before you can use your Stereo Bluetooth Headset
with your phone or other device it has to be paired
once. See “To pair the headset with the phone” on
page 10 or “To pair the headset with another device”
on page 13.
This is the Internet version of the User’s guide. © Print only for private use.

18
•Make sure the headset is charged and within range
of the phone or other device. We recommend a
maximum distance of 5 metres (16.5 feet), with
no solid objects in between.
•Check the Bluetooth settings in the phone or other
device. For more information on Bluetooth and
pairing, go to www.sonyericsson.com/learnabout.
•Make sure your phone supports the Bluetooth
Handsfree profile. See the phone User guide.
The headset does not connect to my music source
•Make sure your phone or other device is paired
with the headset. See “To pair the headset with the
phone” on page 10, or “To pair the headset with
another device” on page 13. You may have to restart
the media player and select to use the headset.
•Make sure your phone or device supports the
Bluetooth Advanced Audio Distribution profile.
•The headset tries to connect to the most recently
used music device paired with the headset. Select
the device to use with the headset. See “To select
another device as a music source” on page 14.
This is the Internet version of the User’s guide. © Print only for private use.

19
The remote control functions do not work
•Make sure your device supports the Bluetooth
Advanced Audio Distribution profile.
The headset is switched off automatically
•The battery is too low. You hear a low beep.
Charge the battery.
•When pairing for the first time, the headset
switches off if you do not pair it with the phone
within 10 minutes.
Battery capacity
•A battery that has been infrequently used or a new
one, could have reduced capacity. It may need to
be recharged a number of times.
Unexpected behaviour
•Reset the headset. See “To reset the headset to
default settings” on page 11.
This is the Internet version of the User’s guide. © Print only for private use.

20
Viewing regulatory information
This is the Internet version of the User’s guide. © Print only for private use.