Sony NW-E103 - Network Walkman User manual

SERVICE MANUAL
Sony Corporation
Connect Company
Published by Sony Engineering Corporation
US Model
Canadian Model
AEP Model
NW-E103/E105/E107
E Model
NW-E103/E105
Australian Model
NW-E107
Tourist Model
NW-E103/E105/E107
PORTABLE IC AUDIO PLAYER
9-879-540-05
2005I16-1
© 2005.09
Ver. 1.4 2005.09
SPECIFICATIONS
NW-E103/E105/E107
Frequency response
20 to 20,000 Hz (single signal measurement)
Interface
Headphone: Stereo mini
USB
Signal-to-noise ratio (S/N)
80 dB or more (excluding ATRAC3 66 kbps)
Dynamic range
85 dB or more (excluding ATRAC3 66 kbps)
Operating temperature
5˚C to 35˚C (67˚F to 95˚F)
Power source
Size AAA (LR03) alkaline battery
Battery life (continuous
playback)
ATRAC3 format: Approximately 70 hours
(Playback at 105 kbps)
ATRAC3plus format: Approximately 60 hours
(Playback at 48 kbps)
MP3 format: Approximately 50 hours
(Playback at 128 kbps)
Dimension
56.2 ×56.2 ×19.2 mm (2
1
⁄
4
×2
1
⁄
4
×
25
⁄
32
inches)
(w/h/d, projecting parts not included)
Mass
Approx. 26 g (1oz) (battery not included)
Supplied accessories
Headphones (1)
Dedicated USB cable (1)
CD-ROM for the SonicStage software, PDF file
Operating Instructions and PDF file SonicStage
Operating Instructions (1)
Quick Start Guide
Design and specifications are subject to
change without notice.
Sampling frequency
ATRAC3, ATRAC3plus: 44.1 kHz
Audio compression technology
Adaptive Transform Acoustic Coding3 (ATRAC3)
Adaptive Transform Acoustic Coding3plus
(ATRAC3plus)
MPEG1 Audio Layer-3 (MP3): 32 to 320 kbps,
variable bit rate-compliant
Maximum recording time (Approx.)
ATRAC3plus
2 hr. 10 min. (256 kbps)
8 hr. 40 min. (64 kbps)
11 hr. 40 min. (48 kbps)
ATRAC3
4 hr. 10 min. (132 kbps)
5 hr. 20 min. (105 kbps)
8 hr. 30 min. (66 kbps)
NW-E103
ATRAC3plus
4 hr. 20 min. (256 kbps)
17 hr. 30 min. (64 kbps)
23 hr. 30 min. (48 kbps)
ATRAC3
8 hr. 30 min. (132 kbps)
10 hr. 40 min. (105 kbps)
17 hr. 00 min. (66 kbps)
NW-E105
MP3
2 hr. 10 min. (256 kbps)
4 hr. 20 min. (128 kbps)
MP3
4 hr. 20 min. (256 kbps)
8 hr. 50 min. (128 kbps)
ATRAC3plus
8 hr. 50 min. (256 kbps)
35 hr. 00 min. (64 kbps)
47 hr. 00 min. (48 kbps)
ATRAC3
17 hr. 00 min. (132 kbps)
21 hr. 40 min. (105 kbps)
34 hr. 10 min. (66 kbps)
NW-E107
MP3
8 hr. 50 min. (256 kbps)
17 hr. 40 min. (128 kbps)
US and foreign patents licensed from
Dolby Laboratories.

2
NW-E103/E105/E107
TABLE OF CONTENTS
1. GENERAL ................................................................... 3
2. DISASSEMBLY ......................................................... 5
3. TEST MODE ............................................................... 6
4. DIAGRAMS
4-1. Block Diagram ................................................................ 9
4-2. Printed Wiring Board – MAIN Board (Side A) –........... 10
4-3. Printed Wiring Board – MAIN Board (Side B) –........... 11
4-4. Schematic Diagram – MAIN Board (1/3) – ................... 12
4-5. Schematic Diagram – MAIN Board (2/3) – ................... 13
4-6. Schematic Diagram – MAIN Board (3/3) – ................... 14
5. EXPLODEDVIEWS
5-1. Overall-1.......................................................................... 15
5-2. Overall-2.......................................................................... 16
5-3. Overall-3.......................................................................... 17
6. ELECTRICAL PARTS LIST .................................. 18
Microsoft, Windows and Windows Media are trademarks or
registered trademarks of Microsoft Corporation in the United States
and/or other countries.
US and foreign patents licensed from Dolby Laboratories.
All other trademarks and registered trademarks are trademarks or
registered trademarks of their respective holders.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
Flexible Circuit Board Repairing
•Keep the temperature of the soldering iron around 270 °C
during repairing.
•Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•Be careful not to apply force on the conductor when soldering
or unsoldering.
Notes on chip component replacement
•Never reuse a disconnected chip component.
•Notice that the minus side of a tantalum capacitor may be
damaged by heat.

3
NW-E103/E105/E107
SECTION 1
GENERAL This section is extracted
from instruction manual.
Locating controls
For details about each part, refer to the pages in parentheses.
Rear sideFront side
2
1
3
4
5
7
6
8
9
0
qz
1Nx button
(page 14, 16 to 17, 19 to 22, 24, 26 to
33)
2Display (page 11, 18, 43)
For details on the display and icons,
refer to page 11.
3.–/+>button
(page 16 to 17, 19 to 22, 24, 26 to 33)
4i(headphone) jack (page 14)
5VOLUME +/– button
(page 14, 28 to 29)
6Strap hole for attaching a strap
7MENU button (page 16 to 22, 24, 26 to
33)
You can switch to the Time display by
pressing and holding the MENU button.
8Battery compartment (page 9)
9REPEAT/SOUND button
(page 18 to 20, 23)
q; GROUP/HOLD switch
(page 15 to 16, 23, 25)
: Group mode. Play or search songs
by group (page 23).
: Normal mode. Play songs by track
name (page 16).
HOLD: Protect the Network Walkman
against accidental operation (page 25).
qa USB jack (page 12)
1 Text/graphic information display (page
17)
Displays track number, track name,
current date and time (page 22 to 23,
26), MESSAGE (page 13, 43) and menu.
Press the MENU button to switch the
display mode. For details, refer to
“Changing the display mode” on page
22.
2Repeat mode indication (page 18)
The current repeat mode is displayed.
3AVLS indication (page 27)
The indication appears while the AVLS
function is activated.
4Digital sound preset indication
(page 23 to 24)
The current sound setting is displayed.
5Remaining battery indication (page 9)
The remaining battery power is
displayed.
Display

4
NW-E103/E105/E107
3Press the .–/+>button to
adjust the “year” setting and
press the Nx button to confirm.
The “month” digit blinks.
2005y 1m 1d
4As you did in step 3, adjust the
settings for “month” and “date.”
After pressing the .–/+>button
to adjust the “date” setting and pressing
the Nx button to confirm, the display
switches to the time setting screen.
1:00
5Press the .–/+>button to
adjust the “hour” setting and
press the Nx button to confirm.
The “minute” digit blinks.
1:00
6As you did in step 5, adjust the
settings for “minute.”
After pressing the .–/+>button
to adjust the “minute” setting and
pressing the Nx button to confirm, the
display switches to the time setting
screen.
DA T E- T IME
7Press the MENU button.
The display returns to the normal screen.
Adjusting the
current time
setting
(DATE-TIME)
You can set and display the current time.
1Press the MENU button.
The menu screen is displayed.
REPEATMODE >
2Press the .–/+>button to
select “DATE-TIME” and press the
Nx button to confirm.
The “year” digit blinks.
2005y 1m 1d
Nx button
MENU button
.–/+>button

5
NW-E103/E105/E107
SECTION 2
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
5 two claws
2 cosmetics plate
1 The cosmetics plate is removed in the direction of the arrow.
(Damage attention of four claws of
cosmetics plate)
4 two screws (1.4)
6 front cabinet
3 two adhesive sheets (plate, cosme)
two claws
cosmetics plate
two adhesive sheets (plate, cosme)
two claws
5 two claws

6
NW-E103/E105/E107 SECTION 3
TEST MODE
STANDING PROCEDURE
Procedure 1: In HOLD state, while pushing Nx button, set a
dry battery.
When the test mode is set, the LCD display appears
as shown below.
Procedure 2: After starting up test mode, the following contents
can be checked. (Before key input, select the
from HOLD state with S706.)
TEST MODE
• Nx button
The KEY test mode is activated. All key inputs are completed,
then Nx button is pressed, restart. (Be aware that the
initialization is included on all key input.)
• [MENU] button
EL0: ON/OFF EL back lights on/off.
• + > button
Ports: ON EL back lights on.
• . – button
Ports: OFF EL back lights off.
• + > button ( state with S706)
All LCD lights on.
• . – button ( state with S706)
All LCD lights off.
• [VOLUME +] button
BEEP turns on.
• [VOLUME --] button
BEEP turns off.
• [ REPEAT SOUND] button
Initialized. (Turns to the factory preset state, time, volume setting
and so on.)
The music data, files and so on in the memory are not changed.
•
512M 1.00.00 J11

7
NW-E103/E105/E107
SECTION 4
DIAGRAMS
Note on Schematic Diagram:
•All capacitors are in µF unless otherwise noted. (p: pF) 50 WV
or less are not indicated except for electrolytics and tantalums.
•All resistors are in Ωand 1/4W or less unless otherwise speci-
fied.
•%: indicates tolerance.
•C: panel designation.
•: B+ Line.
•Power voltage is dc 1.5V and fed with regulated dc power sup-
ply from battery terminal.
•Voltages and waveforms are dc with respect to ground under
no-signal (detuned) conditions.
no mark : PLAY
*: Impossible to measure
•Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations maybenotedduetonormalproductiontoler-
ances.
•Waveforms are taken with a oscilloscope.
Voltage variations maybenotedduetonormalproductiontoler-
ances.
•Circled numbers refer to waveforms.
•Signal path.
E: PLAY BACK
a: DIGITAL OUT
k: DIGITAL IN
Note on Printed Wiring Board
• X: parts extracted from the component side.
• Y: parts extracted from the conductor side.
• : Pattern from the side which enables seeing.
Caution:
Pattern face side: Parts on the pattern face side seen from
(Side A) the pattern face are indicated.
Parts face side: Parts on the parts face side seen from
(Side B) the parts face are indicated.
• MAIN board is multi-layer printed board.
However, the patterns of intermediate-layer have not been in-
cluded in the diagram.
*Replacement of IC400 on MAIN board requires a
special tool.
• Lead Layouts
surface
CSP (Chip Size Package)Lead layout of conventional IC
•Waveforms
1 X400
44.3 ns
2.2 Vp-p
500m V/DIV, 20 ns/DIV
2 X401 (used USB conector)
62.4 ns
1 V/DIV, 20 ns/DIV
3.4 Vp-p
3 IC700 8(OSCOUT)
30.6 µ s
500 mV/DIV, 20
µ s/DIV
1.2 Vp-p

8
NW-E103/E105/E107
•IC Block Diagrams
IC301 NJM2776RB2 (TE2)
– MAIN Board –
1
V+2
OUT R
STB_TC
IN R
VREF
V+1
X_MUTE
8
9
10
REG
5
2
3
6
7
4BIAS
IN L
OUT L
GND
VREF AMP
IC503, IC507 XC9105D091MR
3
4
2 1
VREF WITH
SOFT START,
CHIP ENABLE
CURRENT
RIPPLE DETECTION
AND FB
PHASE
COMPENSATION
BUFFER,
DRIVER
RAMP WAVE
GENERATOR,
OSC
5
GND EXT
VDD
CE VDD FB
VDD
PWM/PFM
CONTROLLER
PWM
COMPARATOR
ERROR
AMP
IC508 XC62HR2802MR IC801 SM8142BD-G-EL
NC
VIN
CE
VSS
VOUT
CURRENT
RESTRICTION
OUTPUT
CONTROL
4
5
1
2
+
–
THE SOURCE OF
CONSTANT VOLTAGE
3
8
LDR
7
CHV
6
OUT1
5
OUT2
1
VSS
2
OSC
3
ENA
4
VDD
High voltage
switching circuit
Dividing circuit Dividing circuit
Oscillator for
boosting voltage and EL driver

99
NW-E103/E105/E107
NW-E103/E105/E107
4-1. BLOCK DIAGRAM
REG USB
IC506
NOR FLASH / SRAM
IC450
NAND FLASH RAM
IC461
USB
CN400
CONNECTOR
VIN VOUT 5
1
2
2
3
5
126
38 - 53
185
197 - 207, 2 - 10
187 184 183186 182
15 - 22
29 - 32, 41 - 44 29 - 36, 38 - 45 11 1 - 9, 16 - 25, 48 13 14 1526 28
16 17 18 19 8 9
128
129
130
102
104
83
173 176 60 57 58 76 74 75 73
8910
52
59
133
148
134
127
DATA -
DATA +
GND
VBUS
VDIOUS
UDM
UDP
TRON
VBUS
VBUS
AN4
AN6/INT8
S701
>/GROUP +
S709
./GROUP –
PF2/EC2/INT4
VDD
LDR
CHV
VDD
VDD
VOUT
VOUT
VOUT
VOUT
CE
VDD
VDD
CE
VDD
EXT
VOUT VIN
VOUT
CE
VIN
IN1
+2.8V
Q460,461
OUT1
IN2
STB
OUT2
VOUT VDD
PI2
OUT2 OUT1
OSCOUT XRES XCS1 SLCK SDA OSCIN VDD
ENA1
CE
SI
SO
SCLK
+2.8V
L801
D801
+2.3V
PI5
177
A0 PI6
PC3 SCK0 SO0 PE7 SO1 SI1 SCK1 PC2
PQ2/PGMTR2
106
RST
AOUTR
AOUTL
PI3
VCC
FCE0 FCLE
FAD0 - 7 A1 - 20D0 - 15
FRE
FWP
FWE
FALE
CSI
WE
RE
CS0
LB
UB
CE0 CLE
I/O1 - 8 A1 - 20DQ0 - 15
RE WP WE ALE BES WE OE
10
RESET BEF LBS UBS
EL PANEL
LIQUID
CRYSTAL
DISPLAY
RTC
IC700
IC801
EL DRIVER
SYSTEM CONTROLLER
IC400
X700
32kHz
137 138
XTAL EXTAL
X400
22.579MHz
141 142
TE TEX
X401
16MHz
CORE DET
IC502
+1.2V REG.
IC504
CORE SW
IC501
+2.8V REG.
IC508
+VIO VBUS
+1.2V
+2.8V
+2.3V
+1.2V
+2.8V
+2.8V
IC500
Q503
Q501
Q506,507
J301
HP AMP
IC301
+2.3V REG.
IC509 L501D504
D503
SWITCHING
Q505
SWITCHING REG.
IC507
D501
D502
L500
SWITCHING
Q500
SWITCHING REG.
IC503
I/O DET
IC505
RESET
Q502,504
RESET
Q451,452
S703
VOLUME –
S702
VOLUME +
103
105
AN5
AN7/INT9
+2.3V
DRY
BATTERY
SIZE "AA"
(IEC DESIGNATION LR03)
1PC, 1.5V
S706
PF0/EC0/INT3
S705
REPEAT SOUND
S704
MENU
S707
Nx
NAND FLASH INTERFACE
USB INTERFACE
A/D, D/A CONVERTER
SERIAL INTERFACE
LEVEL BATTERY DETECT
98AN0
VOUT VDD
RESET DET
IC510
23 24 26 28 27
7
FRB0 R/B
3029
10
FCE1 CE1
31
174
7432
D703
USB
HOLD
87 PG1/DREQ0/INT5
81
i
2
5
5 1
1 4
3
4
4
1
1
7
8
3
9
2
3
5 2
14
3
CE
VDD
EXT
2
5
3
4
1
4
8
7
6 5
11
• SIGNAL PATH
: PLAY BACK
: DIGITAL OUT
: DIGITAL IN

1010
NW-E103/E105/E107
NW-E103/E105/E107
4-2. PRINTEDWIRING BOARD – MAIN BOARD (SIDE A) – :Uses unleaded solder.
• Semiconductor
Location
Ref. No. Location
D300 C-4
D703 C-8
D801 E-3
IC301 D-4
IC461 D-7
IC500 A-6
IC502 F-4
IC505 F-3
IC509 B-5
IC700 E-8
IC801 E-3
Q460 B-7
Q461 A-7
Q501 A-6
Q503 B-6
IC461
IC500
IC509
IC301
IC801
IC505 IC502
IC700
MAIN BOARD (SIDE A)
S701
+ >
S709
.–
EL PANEL
S706
1
8
HOLD
HOLD
S707
1
3
5
4
1-866-354- (11)
11
R465
E107
E107
E103/E105
R466
LCD
(LIQUID
CRYSTAL
DISPLAY)
*
*
Refer to “ NOTES WHEN REPLACING THE LCD ” (page 22),
when replacing the LCD (liquid crystal display).
Ver. 1.4

1111
NW-E103/E105/E107
NW-E103/E105/E107
4-3. PRINTEDWIRING BOARD – MAIN BOARD (SIDE B) – :Uses unleaded solder.
• Semiconductor
Location
Ref. No. Location
D501 D-7
D502 E-6
D503 F-6
D504 F-6
IC400 D-4
IC450 B-4
IC501 E-8
IC503 D-8
IC504 E-7
IC506 F-5
IC507 F-7
IC508 F-7
IC510 G-6
Q451 B-5
Q452 B-5
Q500 D-8
Q502 F-8
Q504 F-8
Q505 F-7
Q506 G-7
Q507 F-7
*Replacement of IC400 on MAIN board requires a
special tool.
IC450
CSP
(Chip Size Package)
IC506
IC510
IC501
IC508 IC507
IC504
IC503
*IC400
*CSP
(Chip Size Package)
MAIN BOARD (SIDE B)
S704
J301
MENU
S705
REPEAT SOUND
S702
S703
4
5
3
1
4
5
3
1
4
5
3
1
4
5
3
1
1
1
5
3
54
i
1-866-354- (11)
11
R424
E107
E103/E105
R432
E107
E103/E105
DRY BATTERY
SIZE "AA"
(IEC DESIGNATION LR03)
1PC, 1.5V
R425 R423
*
LCD (liquid crystal display) Part No.
*
R423
no mount
0 ohm
R425
0 ohm
no mount
1-805-850-11
1-805-850-21
Ver. 1.4
★IC450 cannot be replaced individually.
Replace it with MAIN board assembly for service.

1212
NW-E103/E105/E107
NW-E103/E105/E107
4-4. SCHEMATIC DIAGRAM – MAIN BOARD (1/3) – •See page 8 for IC Block Diagram. • See page 7 forWaveform.
Ver. 1.4
TP432
TP433
IC700
R722
R467
R464
R415
R463
R462
R465 R461
C462
C464
C707
R710
TP703
TP706 D703
S703
TP705
TP702
R709
S707 S704
S705 S709 S701 S702
C702
R704 R700 R701 R702
TP431
TP434
C860C867
R850
R851
C522
TP806
TP852
TP853
TP851
TP850
IC801
TP805
TP401
TP804
TP801
TP802
R805
R801
L801 D801
C801
C802
TP701
VDR405
Q461
Q460
SL700
S706
CN850
IC461
R466
X700
C700
TXD0
RXD0
RV5C348A-E2
470k
470k
0
100k
100k
0
0100k
0.1
1
0.1
1k
VDDRTC
VDD_RTC RB520S-30TE61
GROUP
XPLAY
10k
100pCH
10k 47k 2 2 k 1 0 k
GND
DEBUG
11
100k
100k
1
VDD
LCDCK
LCDDA
LCDCS
LCDRST
SM8142BD-G-EL
GNDEL1
VDD_EL
47k
100k
1SS403(TPH3)
0.01
4700p
ADK2
2SK3541T2L
NDS356AP
8P
0
32KHz
PAS SECONDARY
*1
S
* LCD
(LIQUID
CRYSTAL
DISPLAY)
*
Refer to “ NOTES WHEN REPLACING THE LCD ” (page 22),
when replacing the LCD (liquid crystal display).

1313
NW-E103/E105/E107
NW-E103/E105/E107
4-5. SCHEMATIC DIAGRAM – MAIN BOARD (2/3) – •See page 8 for IC Block Diagram. • See page 7 for Waveforms. *Replacement of IC400 on MAIN board requires a
special tool.
X401
R411
R412
R410
C416
C415
C408
C411
C409
R408
R407
R406
R405
R403
C407
R402
C419
C421
R400
R401
C414
C417
TP407
TP404
TP405
R421
TP408
R420
TP411
TP416
TP417
TP415
TP418
TP409
IC301
C104
R103
R102
R202
R203
C204
C103
R303
C305
C303 R101
C102
R100
C100
R200
C200
FB302
C202
R201
R302
C301
R300
FB300
FB200
FB100
TP200
TP100
C401
TP406
R431
R432
R433
R414
R425
C418
R409
R404
R711
TP400
R715
R716
C703
C701
C704
C705
C706
C709
R717
R719
R422
R720
R724
C400
C404
C405
R454 R453 C450
R452
R469
R455
C452
R450
Q451
R457
R460
R459
R458
C451
R451
R725
R723
R727
TP412
R416
R718
R714
R705
R721
TP704
TP419
TP700
J301
C410
C403
C402
VDR402
X400
C304
C101
C201
C300
D300
C302
VDR400
VDR406
VDR701
VDR700
VDR401
VDR404
VDR403
Q452
IC400
IC450
R424
C203
16MHz
1M
220
100
10p
10p
1
1
0.1
1.5k
22
22
0
2.2M
0.1
10k
0.1
0.1
1M
10k
0.1
0.1
PD4
TXD1
RXD1
100k
MSINS
10k
MSDIS
MSSCLK
MSBS
MSPWR
XMS
XBOOT
NJM2776RB2(TE2)
0.22
47k
33k
33k
47k
0.22
100p
0
0.1
0.33 10
0.22
4.7k
0.022
4.7k
0.022
0.22
10
47k
0.1
0
HP-R
HP-L
1000p
RST
0
0
0
0
0
0.1
22
2.2M
10k
GND
10k
10k
1000p
0.01
0.01
0.01
0.01
0.1
10k
10k
10k
0
10k
0.1
0.1
0.1
470k 470k 0.1
100k
1M
100k
1000p
0
2SC5658T2L
1M
1M
2.2M
470k
0.0047
100k
470k
470k
100k DEBOG
10k
22k
22k
470k
10k
XHOLD
EL_PWON2
ADK1
4.7
6.3V
4.7 10V
4.7 10V
22.579MHz
10
10V
220
2.5V
220
2.5V
10
10V
MAZS120008SO
22
4V
2SA2029T2L
CXR704060-202GA
0
100p
*2
R423
0
LCD (liquid crystal display) Part No.
*
*
R423
no mount
0 ohm
R425
0 ohm
no mount
1-805-850-11
1-805-850-21
Ver. 1.4
★IC450 cannot be replaced individually.
Replace it with MAIN board assembly for service.

1414
NW-E103/E105/E107
NW-E103/E105/E107
4-6. SCHEMATIC DIAGRAM – MAIN BOARD (3/3) –
R533
TP509
C520
TP503
R531
R532
IC510
R534
IC505
R523
Q506
R524
C511
R527
R529 TP505
C516
R525
C512
IC502
R519
R510
Q502
R507 C503
R502
R517
R522
C502
R501
IC501
R505
R514
TP508
TP507
R530
R528
R526
C518
D504
L501
C510
R513
R508
R500
D501
L500
C506
D503
D502
IC500
C515
C513
R509
R504
R506
TP502
R518
R516
R511
C505
R503
R512
R521
R515
R520
C508
CN400
TP410
R535
TP504
TP414
TP413
C501
TP501
TP500 Q501
TP506
IC509
C521
IC508
IC504
Q507
C519
Q504
C509
VDR504
IC503
IC507
C517
Q505
Q500
VDR503
C504
VDR501
Q503
IC506
VDR502
VDR500
C500
0
2.3V
0.1
1.2V
0
0
S-80824CNPF-B8J
-TF
100
S-80824CNPF-B8J
-TF
470k
2SC5658T2L
1M
0.047
470k
1M REGCE
0.1
1M
0.01
S-80810CNPF-B9D
-TF
1M
470k
2SC5658T2L
2.2M 0.01
1M
100k
47k
0.1
100k
S-80810NPF-B9D
-TF
2.2M
470k
VCORE
2.8V
470k
100k
100k
33p
RSX101M-30TR
47p 50V
47k
220k
470k
RSX101M-30TR
1
1SS400-TE61
1SS400-TE61
S-80809CNPF-B9N
-TF
10
6.3V
0.1
2.2M
2.2M
330k
NW
1M
470k
220k
0.1
1M
100k
470k
220k
22k
0.1
SGND
10
1
BATT+
BATT- 3LN01S-K-TL-E
XC62HR2301MR
4.7
6.3V
XC62HR2802MR
R1160N121B-TR-FA
2SA2029T2L
100
6.3V
2SA2029T2L
10
6.3V
XC9105D091MR
XC9105D091MR
47 10V
XP151A13A0MR
XP151A12A2MR
47
10V
XP4601-TXE
XC62HR3302MR
47
10V
•See page 8 for IC Block Diagrams.

15
NW-E103/E105/E107
22-589-659-01 CABINET (REAR)(WHITE)(US, CND)
22-589-659-11 CABINET (REAR)(BLACK)(US, CND)
22-589-659-21 CABINET (REAR)(BLUE)(US, CND)
2 2-589-659-31 CABINET (REAR)(WHITE)(AEP, HK, KR, JE)
22-589-659-41 CABINET (REAR)(BLUE)(AEP, HK, KR, JE, AUS)
22-589-659-51 CABINET (REAR)(ORANGE)(AEP, HK, KR, JE)
22-589-659-61 CABINET (REAR)(RED)(CND, AEP, HK, KR, JE)
22-589-659-71 CABINET (REAR)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
22-589-659-81 CABINET (REAR)(PINK)(AEP)
22-589-659-91 CABINET (REAR)(PINK)(US)
32-589-661-01 BUTTON (REAR)(WHITE)(US, CND)
32-589-661-11 BUTTON (REAR)(BLACK)(US, CND)
- Continued on page 16 -
SECTION 5
EXPLODED VIEWS
NOTE:
•-XX and -X mean standardized parts, so they
may have some difference from the original
one.
•Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when
ordering these items.
•The mechanical parts with no reference
numberin theexplodedviewsarenotsupplied.
Ref. No. Part No. Description Remark
12-589-660-01 LID, BATTERY CASE (WHITE)(US, CND)
12-589-660-11 LID, BATTERY CASE (BLACK)(US, CND)
12-589-660-21 LID, BATTERY CASE (BLUE)(US, CND)
1 2-589-660-31 LID, BATTERY CASE (WHITE)(AEP, HK, KR, JE)
12-589-660-41 LID, BATTERY CASE (BLUE)
(AEP, HK, KR, JE, AUS)
12-589-660-51 LID, BATTERY CASE (ORANGE)
(AEP, HK, KR, JE)
12-589-660-61 LID, BATTERY CASE (RED)
(CND, AEP, HK, KR, JE)
12-589-660-71 LID, BATTERY CASE (SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
12-589-660-81 LID, BATTERY CASE (PINK)(AEP)
12-589-660-91 LID, BATTERY CASE (PINK)(US)
5-1. OVERALL-1
Ref. No. Part No. Description Remark
•Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
R R
Parts of Color Cabinet’s Color
•Abbreviation
AUS:Australian model
CND: Canadian model
HK : HongKong model
JE : Tourist model
KR : Korean model
Ver. 1.3
1
2
3
4
511
14
13
12
9
9
8
6
7
15
16
10

16
NW-E103/E105/E107
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
5-2. OVERALL-2
- Continued from page 15 -
32-589-661-21 BUTTON (REAR)(BLUE)(US, CND)
32-589-661-31 BUTTON (REAR)(WHITE)(AEP, HK, KR, JE)
3 2-589-661-41 BUTTON (REAR)(BLUE)(AEP, HK, KR, JE, AUS)
32-589-661-51 BUTTON (REAR)(ORANGE)(AEP, HK, KR, JE)
32-589-661-61 BUTTON (REAR)(RED)(CND, AEP, HK, KR, JE)
32-589-661-71 BUTTON (REAR)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
3 2-589-661-81 BUTTON (REAR)(PINK)(AEP)
32-589-661-91 BUTTON (REAR)(PINK)(US)
42-589-662-01 BUTTON (VOL)(WHITE)(US, CND)
42-589-662-11 BUTTON (VOL)(BLACK)(US, CND)
42-589-662-21 BUTTON (VOL)(BLUE)(US, CND)
42-589-662-31 BUTTON (VOL)(WHITE)(AEP, HK, KR, JE)
42-589-662-41 BUTTON (VOL)(BLUE)(AEP, HK, KR, JE, AUS)
42-589-662-51 BUTTON (VOL)(ORANGE)(AEP, HK, KR, JE)
42-589-662-61 BUTTON (VOL)(RED)(CND, AEP, HK, KR, JE)
42-589-662-71 BUTTON (VOL)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
42-589-662-81 BUTTON (VOL)(PINK)(AEP)
42-589-662-91 BUTTON (VOL)(PINK)(US)
52-589-671-01 ORNAMENT (JACK)
63-247-180-01 SCREW (1.4X3)
72-589-669-01 SHEET (PLATE, COSME) ADHESIVE
82-589-670-21 PLATE, COSMETICS (ORANGE)
(AEP, HK, KR, JE)
82-589-670-01 PLATE, COSMETICS (WHITE)(AEP, HK, KR, JE)
82-589-670-11 PLATE, COSMETICS (BLUE)
(AEP, HK, KR, JE, AUS)
82-589-670-31 PLATE, COSMETICS (RED)
(CND, AEP, HK, KR, JE)
82-589-670-41 PLATE, COSMETICS (SILVER)
(US, CND, AEP, HK, KR, JE, AUS, US:PINK)
82-593-364-01 PLATE, COSMETICS (WHITE)(US, CND)
82-593-364-11 PLATE, COSMETICS (BLACK)(US, CND)
82-593-364-21 PLATE, COSMETICS (BLUE)(US, CND)
82-599-431-01 PLATE, COSMETICS (PINK)(AEP)
93-252-824-11 SCREW (1.4)
10 2-589-668-01 CABINET (FRONT)(WHITE)(US, CND)
10 2-589-668-11 CABINET (FRONT)(BLACK)(US, CND)
- Continued on page 17 -
Ver. 1.3
1
2
3
4
511
14
13
12
9
9
8
6
7
15
16
10

17
NW-E103/E105/E107
- Continued from page 16 -
10 2-589-668-21 CABINET (FRONT)(BLUE)(US, CND)
10 2-589-668-31 CABINET (FRONT)(WHITE)(AEP, HK, KR, JE)
10 2-589-668-41 CABINET (FRONT)(BLUE)
(AEP, HK, KR, JE, AUS)
10 2-589-668-51 CABINET (FRONT)(ORANGE)(AEP, HK, KR, JE)
10 2-589-668-61 CABINET (FRONT)(RED)(CND, AEP, HK, KR, JE)
10 2-589-668-71 CABINET (FRONT)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
10 2-589-668-81 CABINET (FRONT)(PINK)(AEP)
10 2-589-668-91 CABINET (FRONT)(PINK)(US)
11 2-597-647-01 SHEET (VOL), ADHESIVE
12 X-2059-678-1 MAIN BOARD, COMPLETE (E103 : AEP)
12 X-2059-679-1 MAIN BOARD, COMPLETE (E103 : EXCEPT AEP)
12 X-2059-681-1 MAIN BOARD, COMPLETE (E105 : AEP)
12 X-2059-682-1 MAIN BOARD, COMPLETE (E105 : EXCEPT AEP)
12 X-2059-684-1 MAIN BOARD, COMPLETE (E107 : AEP)
12 X-2059-685-1 MAIN BOARD, COMPLETE (E107 : EXCEPT AEP)
13 2-589-663-01 KNOB (HOLD)(WHITE)(US, CND)
13 2-589-663-11 KNOB (HOLD)(BLACK)(US, CND)
13 2-589-663-21 KNOB (HOLD)(BLUE)(US, CND)
13 2-589-663-31 KNOB (HOLD)(WHITE)(AEP, HK, KR, JE)
13 2-589-663-41 KNOB (HOLD)(BLUE)(AEP, HK, KR, JE, AUS)
13 2-589-663-51 KNOB (HOLD)(ORANGE)(AEP, HK, KR, JE)
13 2-589-663-61 KNOB (HOLD)(RED)(CND, AEP, HK, KR, JE)
13 2-589-663-71 KNOB (HOLD)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
13 2-589-663-81 KNOB (HOLD)(PINK)(AEP)
13 2-589-663-91 KNOB (HOLD)(PINK)(US)
14 2-589-664-01 LID (CONNECTOR)(WHITE)(US, CND)
14 2-589-664-11 LID (CONNECTOR)(BLACK)(US, CND)
14 2-589-664-21 LID (CONNECTOR)(BLUE)(US, CND)
14 2-589-664-31 LID (CONNECTOR)(WHITE)(AEP, HK, KR, JE)
14 2-589-664-41 LID (CONNECTOR)(BLUE) (AEP, HK, KR, JE,AUS)
14 2-589-664-51 LID (CONNECTOR)(ORANGE)(AEP, HK, KR, JE)
14 2-589-664-61 LID (CONNECTOR)(RED)
(CND, AEP, HK, KR, JE)
14 2-589-664-71 LID (CONNECTOR)(SILVER)
(US, CND, AEP, HK, KR, JE, AUS)
14 2-589-664-81 LID (CONNECTOR)(PINK)(AEP)
14 2-589-664-91 LID (CONNECTOR)(PINK)(US)
15 2-594-255-01 SPACER (BATTERY)
16 2-597-648-01 SHEET (KNOB), ADHESIVE
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
5-3. OVERALL-3
Ver. 1.3
1
2
3
4
511
14
13
12
9
9
8
6
7
15
16
10

18
NW-E103/E105/E107 SECTION 6
ELECTRICAL PARTS LIST
NOTE:
•Due to standardization, replacements in the
parts list may be different from the parts
specified in the diagrams or the components
used on the set.
•-XX and -X mean standardized parts, so they
may have some difference from the original
one.
•RESISTORS
All resistors are in ohms.
METAL: Metal-film resistor.
METAL OXIDE: Metal oxide-film resistor.
F: nonflammable
•Accessories are given in the last of this parts
list.
•Items marked “*” are not stocked since they
are seldom required for routine service.
Some delay should be anticipated when
ordering these items.
•SEMICONDUCTORS
In each case, u: µ, for example:
uA. . : µA. . uPA. . : µPA. .
uPB. . : µPB. . uPC. . : µPC. .
uPD. . : µPD. .
•Color Indication of Appearance Parts
Example:
KNOB, BALANCE (WHITE) . . . (RED)
R R
Parts of Color Cabinet’s Color
When indicating parts by reference number,
please include the board name.
•CAPACITORS
uF: µF
•COILS
uH: µH
•Abbreviation
AUS:Australian model
CND : Canadian model
HK : HongKong model
JE : Tourist model
KR : Korean model
MAIN
Ver. 1.4
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
X-2059-678-1 MAIN BOARD, COMPLETE (E103 : AEP)
X-2059-679-1 MAIN BOARD, COMPLETE (E103 : EXCEPT AEP)
X-2059-681-1 MAIN BOARD, COMPLETE (E105 : AEP)
X-2059-682-1 MAIN BOARD, COMPLETE (E105 : EXCEPT AEP)
X-2059-684-1 MAIN BOARD, COMPLETE (E107 : AEP)
X-2059-685-1 MAIN BOARD, COMPLETE (E107 : EXCEPT AEP)
*********************
✩1-805-848-11 DISPLAY PANEL, LIQUID CRYSTAL
✩1-805-848-21 DISPLAY PANEL, LIQUID CRYSTAL
1-805-850-11 ELEMENT, EL
2-320-677-01 CUSHION (LCD)
2-589-665-01 HOLDER, LCD
2-589-666-01 TERMINAL (+), BATTERY
2-589-667-01 TERMINAL (–), BATTERY
2-597-673-01 SHEET (EL), ADHESIVE
2-597-707-01 SHEET (NAND), INSULATING
2-597-708-01 SHEET (CONNECTOR), INSULATING
< CAPACITOR >
C100 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V
C101 1-135-868-91 TANTAL. CHIP 220uF 20% 2.5V
C102 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C103 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C104 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C200 1-107-819-11 CERAMIC CHIP 0.022uF 10% 16V
C201 1-135-868-91 TANTAL. CHIP 220uF 20% 2.5V
C202 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C203 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C204 1-115-467-11 CERAMIC CHIP 0.22uF 10% 10V
C300 1-104-851-11 TANTAL. CHIP 10uF 20% 10V
C301 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C302 1-127-895-91 TANTAL. CHIP 22uF 20% 4V
C303 1-128-934-91 CERAMIC CHIP 0.33uF 20% 10V
C304 1-104-851-11 TANTAL. CHIP 10uF 20% 10V
C305 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C400 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C401 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
C402 1-131-860-91 TANTAL. CHIP 4.7uF 20% 10V
C403 1-131-860-91 TANTAL. CHIP 4.7uF 20% 10V
C404 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C405 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C407 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C408 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C409 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C410 1-125-926-91 TANTAL. CHIP 4.7uF 20% 6.3V
C411 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C414 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C415 1-164-850-11 CERAMIC CHIP 10PF 0.5PF 50V
C416 1-164-850-11 CERAMIC CHIP 10PF 0.5PF 50V
C417 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C418 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C419 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C421 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C450 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C451 1-164-941-11 CERAMIC CHIP 0.0047uF 10% 16V
C452 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
C462 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C464 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C500 1-137-934-91 TANTAL. CHIP 47uF 20% 10V
C501 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C502 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C503 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C504 1-137-934-91 TANTAL. CHIP 47uF 20% 10V
C505 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C506 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C508 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C509 1-117-919-11 TANTAL. CHIP 10uF 20% 6.3V
C510 1-164-866-11 CERAMIC CHIP 47PF 5% 50V
C511 1-119-923-11 CERAMIC CHIP 0.047uF 10% 10V
C512 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C513 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C515 1-137-710-11 CERAMIC CHIP 10uF 20% 6.3V
C516 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C517 1-137-934-91 TANTAL. CHIP 47uF 20% 10V
C518 1-164-862-11 CERAMIC CHIP 33PF 5% 50V
C519 1-128-964-91 TANTAL. CHIP 100uF 20% 6.3V
C520 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C521 1-125-926-91 TANTAL. CHIP 4.7uF 20% 6.3V
C522 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C700 1-756-305-11 BATTERY, PAS SECONDARY
C701 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C702 1-164-874-11 CERAMIC CHIP 100PF 5% 50V
C703 1-164-937-11 CERAMIC CHIP 0.001uF 10% 50V
C704 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C705 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C706 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C707 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C709 1-125-777-11 CERAMIC CHIP 0.1uF 10% 10V
C801 1-164-943-11 CERAMIC CHIP 0.01uF 10% 16V
C802 1-100-437-91 CERAMIC CHIP 4700PF 5% 100V
C860 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
C867 1-125-837-91 CERAMIC CHIP 1uF 10% 6.3V
✩When replacing the LIQUID CRYSTAL DISPLAY PANEL,
refer to NOTE WHEN REPLACINGTHE LCD (Page 22).

19
NW-E103/E105/E107
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
< CONNECTOR >
CN400 1-818-513-21 CONNECTOR (SQUARE TYPE) (USB) 5P ( )
CN850 1-817-288-41 CONNECTOR, FFC/FPC (ZIF) 8P
< DIODE >
D300 8-719-056-59 DIODE MAZS120008SO
D501 6-500-460-01 DIODE RSX101M-30TR
D502 8-719-069-28 DIODE 1SS400TE-61
D503 8-719-069-28 DIODE 1SS400TE-61
D504 6-500-460-01 DIODE RSX101M-30TR
D703 8-719-069-29 DIODE RB520S-30TE61
D801 8-719-052-12 DIODE 1SS403 (TPH3)
< FERRITE BEAD >
FB100 1-469-082-21 INDUCTOR, FERRITE BEAD (1005)
FB200 1-469-082-21 INDUCTOR, FERRITE BEAD (1005)
FB300 1-543-958-22 BEAD, FERRITE (CHIP) (1608)
FB302 1-469-082-21 INDUCTOR, FERRITE BEAD (1005)
< IC >
IC301 6-703-295-01 IC NJM2776RB2 (TE2)
IC400 8-753-234-35 IC CXR704060-202GA
★IC450 ––––––––––– IC S99-50082 (E107)
★IC450 ––––––––––– IC S29AL016D70BFI020 (E103/E105)
IC461 6-707-829-01 IC K04SONY99 (E107)
IC461 6-707-830-01 IC K04SONY95 (E105)
IC461 6-708-162-01 IC K05SONY03 (E103)
IC500 6-706-898-01 IC S-80809CNPF-B9N-TF
IC501 6-706-899-01 IC S-80810CNPF-B9O-TF
IC502 6-706-899-01 IC S-80810CNPF-B9O-TF
IC503 6-701-734-01 IC XC9105D091MR
IC504 6-703-317-01 IC R1160N121B-TR-FA
IC505 6-706-900-01 IC S-80824CNPF-B8J-TF
IC506 8-759-657-74 IC XC62HR3302MR
IC507 6-701-734-01 IC XC9105D091MR
IC508 6-703-298-01 IC XC62HR2802MR
IC509 6-704-021-01 IC XC62HR2301MR
IC510 6-706-900-01 IC S-80824CNPF-B8J-TF
IC700 8-759-641-91 IC RV5C348A-E2
IC801 8-759-830-70 IC SM8142BD-G-EL
< JACK >
J301 1-817-124-11 JACK (i)
< COIL >
L500 1-419-861-21 INDUCTOR 100uH
L501 1-419-861-21 INDUCTOR 100uH
L801 1-414-406-41 INDUCTOR 220uH
< TRANSISTOR >
Q451 8-729-056-42 TRANSISTOR 2SC5658T2L
Q452 6-550-132-01 TRANSISTOR 2SA2029T2L
Q460 8-729-041-23 TRANSISTOR NDS356AP
Q461 6-551-346-01 TRANSISTOR 2SK3541T2L
Q500 8-729-053-03 TRANSISTOR XP151A12A2MR
Q501 6-550-746-01 TRANSISTOR 3LN01S-K-TL-E
Q502 8-729-056-42 TRANSISTOR 2SC5658T2L
Q503 8-729-427-74 TRANSISTOR XP4601-TXE
Q504 6-550-132-01 TRANSISTOR 2SA2029T2L
Q505 8-729-052-37 TRANSISTOR XP151A13A0MR
Q506 8-729-056-42 TRANSISTOR 2SC5658T2L
Q507 6-550-132-01 TRANSISTOR 2SA2029T2L
< RESISTOR >
R100 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
R101 1-218-929-11 RES-CHIP 10 5% 1/16W
R102 1-218-971-11 RES-CHIP 33K 5% 1/16W
R103 1-218-973-11 RES-CHIP 47K 5% 1/16W
R200 1-218-961-11 RES-CHIP 4.7K 5% 1/16W
R201 1-218-929-11 RES-CHIP 10 5% 1/16W
R202 1-218-971-11 RES-CHIP 33K 5% 1/16W
R203 1-218-973-11 RES-CHIP 47K 5% 1/16W
R300 1-218-990-11 SHORT CHIP 0
R302 1-218-973-11 RES-CHIP 47K 5% 1/16W
R303 1-218-990-11 SHORT CHIP 0
R400 1-218-989-11 RES-CHIP 1M 5% 1/16W
R401 1-218-965-11 RES-CHIP 10K 5% 1/16W
R402 1-218-965-11 RES-CHIP 10K 5% 1/16W
R403 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R404 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R405 1-218-990-11 SHORT CHIP 0
R406 1-218-933-11 RES-CHIP 22 5% 1/16W
R407 1-218-933-11 RES-CHIP 22 5% 1/16W
R408 1-218-955-11 RES-CHIP 1.5K 5% 1/16W
R409 1-218-933-11 RES-CHIP 22 5% 1/16W
R410 1-218-941-81 RES-CHIP 100 5% 1/16W
R411 1-218-989-11 RES-CHIP 1M 5% 1/16W
R412 1-218-945-11 RES-CHIP 220 5% 1/16W
R414 1-218-990-11 SHORT CHIP 0 (E103/E105)
R415 1-218-977-11 RES-CHIP 100K 5% 1/16W
R416 1-218-965-11 RES-CHIP 10K 5% 1/16W
R420 1-218-965-11 RES-CHIP 10K 5% 1/16W
R421 1-218-977-11 RES-CHIP 100K 5% 1/16W
R422 1-218-965-11 RES-CHIP 10K 5% 1/16W
✩R423 1-218-990-11 SHORT CHIP 0 (LCD Part No. SUFFIX-21)
R424 1-218-990-11 SHORT CHIP 0 (E107)
✩R425 1-218-990-11 SHORT CHIP 0 (LCD Part No. SUFFIX-11)
R431 1-218-990-11 SHORT CHIP 0
R432 1-218-990-11 SHORT CHIP 0 (E107)
R433 1-218-990-11 SHORT CHIP 0
R450 1-218-990-11 SHORT CHIP 0
R451 1-218-977-11 RES-CHIP 100K 5% 1/16W
R452 1-218-977-11 RES-CHIP 100K 5% 1/16W
R453 1-218-985-11 RES-CHIP 470K 5% 1/16W
R454 1-218-985-11 RES-CHIP 470K 5% 1/16W
R455 1-218-977-11 RES-CHIP 100K 5% 1/16W
(E103/E105)
R457 1-218-989-11 RES-CHIP 1M 5% 1/16W
R458 1-218-985-11 RES-CHIP 470K 5% 1/16W
R459 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R460 1-218-989-11 RES-CHIP 1M 5% 1/16W
R461 1-218-977-11 RES-CHIP 100K 5% 1/16W
R462 1-218-990-11 SHORT CHIP 0
R463 1-218-977-11 RES-CHIP 100K 5% 1/16W
R464 1-218-990-11 SHORT CHIP 0 (E103/E105)
R465 1-218-990-11 SHORT CHIP 0 (E107)
MAIN
✩Refer to NOTE WHEN REPLACING THE LCD (Page 22)
about R423 and R425 usage.
Ver. 1.4
★IC450 cannot be replaced individually.
Replace it with MAIN board assembly for service.

20
NW-E103/E105/E107
Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark
R466 1-218-990-11 SHORT CHIP 0 (E107)
R467 1-218-985-11 RES-CHIP 470K 5% 1/16W
R469 1-218-989-11 RES-CHIP 1M 5% 1/16W
R500 1-218-985-11 METAL CHIP 470K 0.5% 1/16W
R501 1-218-977-11 RES-CHIP 100K 5% 1/16W
R502 1-218-989-11 RES-CHIP 1M 5% 1/16W
R503 1-218-989-11 RES-CHIP 1M 5% 1/16W
R504 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R505 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R506 1-208-947-11 METAL CHIP 330K 0.5% 1/16W
R507 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R508 1-208-943-11 METAL CHIP 220K 0.5% 1/16W
R509 1-220-804-11 RES-CHIP 2.2M 5% 1/16W
R510 1-218-985-11 RES-CHIP 470K 5% 1/16W
R511 1-208-943-11 METAL CHIP 220K 0.5% 1/16W
R512 1-218-977-11 RES-CHIP 100K 5% 1/16W
R513 1-208-927-11 METAL CHIP 47K 0.5% 1/16W
R514 1-218-985-11 RES-CHIP 470K 5% 1/16W
R515 1-208-943-11 METAL CHIP 220K 0.5% 1/16W
R516 1-218-985-11 RES-CHIP 470K 5% 1/16W
R517 1-218-977-11 RES-CHIP 100K 5% 1/16W
R518 1-218-989-11 RES-CHIP 1M 5% 1/16W
R519 1-218-989-11 RES-CHIP 1M 5% 1/16W
R520 1-208-715-11 METAL CHIP 22K 0.5% 1/16W
R521 1-218-985-11 RES-CHIP 470K 5% 1/16W
R522 1-218-973-11 RES-CHIP 47K 5% 1/16W
R523 1-218-985-11 RES-CHIP 470K 5% 1/16W
R524 1-218-989-11 RES-CHIP 1M 5% 1/16W
R525 1-218-989-11 RES-CHIP 1M 5% 1/16W
R526 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
R527 1-218-985-11 RES-CHIP 470K 5% 1/16W
R528 1-208-935-11 METAL CHIP 100K 0.5% 1/16W
R529 1-218-989-11 RES-CHIP 1M 5% 1/16W
R530 1-218-985-11 METAL CHIP 470K 0.5% 1/16W
R531 1-218-990-11 SHORT CHIP 0
R532 1-218-990-11 SHORT CHIP 0
R533 1-218-990-11 SHORT CHIP 0
R534 1-218-941-81 RES-CHIP 100 5% 1/16W
R535 1-218-929-11 RES-CHIP 10 5% 1/16W
R700 1-218-973-11 RES-CHIP 47K 5% 1/16W
R701 1-218-969-11 RES-CHIP 22K 5% 1/16W
R702 1-218-965-11 RES-CHIP 10K 5% 1/16W
R704 1-218-965-11 RES-CHIP 10K 5% 1/16W
R705 1-218-985-11 RES-CHIP 470K 5% 1/16W
R709 1-218-965-11 RES-CHIP 10K 5% 1/16W
R710 1-218-953-11 RES-CHIP 1K 5% 1/16W
R711 1-218-965-11 RES-CHIP 10K 5% 1/16W
R714 1-218-969-11 RES-CHIP 22K 5% 1/16W
R715 1-218-965-11 RES-CHIP 10K 5% 1/16W
R716 1-218-965-11 RES-CHIP 10K 5% 1/16W
R717 1-218-965-11 RES-CHIP 10K 5% 1/16W
R718 1-218-969-11 RES-CHIP 22K 5% 1/16W
R719 1-218-965-11 RES-CHIP 10K 5% 1/16W
R720 1-218-990-11 SHORT CHIP 0
R721 1-218-965-11 RES-CHIP 10K 5% 1/16W
R722 1-218-985-11 RES-CHIP 470K 5% 1/16W
R723 1-218-985-11 RES-CHIP 470K 5% 1/16W
R724 1-218-965-11 RES-CHIP 10K 5% 1/16W
R725 1-218-985-11 RES-CHIP 470K 5% 1/16W
R727 1-218-977-11 RES-CHIP 100K 5% 1/16W
R801 1-218-977-11 RES-CHIP 100K 5% 1/16W
R805 1-218-973-11 RES-CHIP 47K 5% 1/16W
R850 1-218-977-11 RES-CHIP 100K 5% 1/16W
R851 1-218-977-11 RES-CHIP 100K 5% 1/16W
< SWITCH >
S701 1-786-453-21 SWITCH, TACTILE (+ >)
S702 1-786-860-11 SWITCH, TACTILE (+)
S703 1-786-860-11 SWITCH, TACTILE (–)
S704 1-786-453-21 SWITCH, TACTILE (MENU)
S705 1-786-453-21 SWITCH, TACTILE (REPEAT SOUND)
S706 1-692-605-31 SWITCH, SLIDE ( HOLD)
S707 1-786-453-21 SWITCH, TACTILE (Nx)
S709 1-786-453-21 SWITCH, TACTILE (. –)
< VARISTOR >
VDR400 1-803-742-21 VARISTOR, CHIP
VDR401 1-803-742-21 VARISTOR, CHIP
VDR402 1-803-742-21 VARISTOR, CHIP
VDR403 1-805-216-21 VARISTOR, CHIP
VDR404 1-805-216-21 VARISTOR, CHIP
VDR405 1-805-216-21 VARISTOR, CHIP
VDR406 1-805-216-21 VARISTOR, CHIP
VDR500 1-803-742-21 VARISTOR, CHIP
VDR501 1-803-742-21 VARISTOR, CHIP
VDR502 1-805-216-21 VARISTOR, CHIP
VDR503 1-805-216-21 VARISTOR, CHIP
VDR504 1-805-216-21 VARISTOR, CHIP
VDR700 1-803-742-21 VARISTOR, CHIP
VDR701 1-803-742-21 VARISTOR, CHIP
< VIBRATOR >
X400 1-795-891-21 VIBRATOR, CERAMIC 22.579MHz
X401 1-795-792-21 VIBRATOR, CRYSTAL 16MHz
X700 1-795-794-21 VIBRATOR, CRYSTAL 32KHz
************************************************************
ACCESSORIES
***********
1-829-882-12 CORD, CONNECTION (USB)
2-593-868-23 SOFT (SS3.0), APPLICATION (SonicStage
software, PDF file Operating Instruction and
PDF file SonicStage Operating Instructions)
2-594-961-11 MANUAL, INSTRUCTION (Quick Start Guide)
(ENGLISH)
2-594-961-21 MANUAL, INSTRUCTION (Quick Start Guide)
(FRENCH)(CND, AEP)
2-594-961-31 MANUAL, INSTRUCTION (Quick Start Guide)
(GERMAN)(AEP)
2-594-961-41 MANUAL, INSTRUCTION (Quick Start Guide)
(SPANISH)(AEP)
2-594-961-51 MANUAL, INSTRUCTION (Quick Start Guide)
(ITALIAN)(AEP)
2-594-961-61 MANUAL, INSTRUCTION (Quick Start Guide)
(SIMPLIFIED CHINESE)(JE)
MAIN
Ver. 1.3