Sony CP-A2L Instruction sheet

• 111111111 u
SONY@
4-274-094-02
USB Portable Power
Supply
EiJ Operating lnstructions
lil'I Mode d'emploi
l!lJI Bedienungsanleitung
IB Manual de instrucciones
IEill Gebruiksaanwijzing
„ lstruzioni per l'uso
liil Manual de lnstrw;:öes
l'fllNavod k obsluze
l:I!JI Hasznalati utmutat6
E!llll lnstrukcja obstugi
E::.Navod na obsluhu
„ Navodila za uporabo
liI!ll lnstruqiuni de operare
CP-A2L, CP-A2LS
© 2011 Sony Corporation·
Printed in China
CCJii@tfibi
Features and Functions
CP-A2L/CP-A2LS is a packaged product consisting of an
AC input module
and a USB output module (Built-in Li-
ion rechargeable batteiy). In order to supplypower to the
portable device, a
USB charging cable is required (not
supplied). Please check theportable device for specific
pin connection.
USB Type-A is required for the USB
output module.
CD Portable USB output module
After charging the USB output module with theAC
~n~~t m~d~_: rc;u. can detach them "":d carrythe
Status of the LED indicator
·b.·
(Tu;,;~ on)
(Turnsoff)
·Q·. P.· . ·Q·. ·Q· . ·Q·
(Flashes rapidly)
Charging
conditions
Charging
Charging
complete
or AC
input module
unplugged
Referto
"Troubleshooting"
USB output indicator (green)
This indicator shows power supplying conditions to
portable devices.
Status ofthe LED indicator
·Q·
(Turnson)
·Q·. ·Q .. ·Q·. Q.·
(Flashes slowly)
·Q· . ·Q.· . ·Q· . ·Q· . ·Q·
(Flashes rapidly)
Power Supplying
conditions
Supplying
Referto
"Troubleshooting"
Referto
"Troubleshooting"
To charge the USB output module
using the AC input module
1. Attach the AC Input module to the USB output
module firmly (until it clicks).
* Be sure to correctly orient the joining terminals to
avoid breakage.
2. Unfold
the plug of the AC input module, and
plug it into a wall outlet, holding the AC input
module.
The remaining battery capacity indicators turn on
and the AC input module starts charging. TheAC
input indicator lights
up while charging.
* Refer to "Troubleshooting" if theAC input
indicator turns off a few minutes later, or does not
turnon.
3. Hold and unplug the AC input module after the
AC input indicator turns off.
To checkremaining battery
capacity
1. Press the button on the USB output module.
You can check the remaining battery capacity by the
number
of remaining batterycapacity indicators.
Status of the LED
indicator
4 indicators turn on
3 indicators turn on
2 indicators turn on
1 indicator tums on
Does not turn on
Remaining battery
capacity
Full
AlmostFull
Medium
Low
Empty
* The USB output module is out ofpower if no
indicators turn on. Charge the USB output module via
the AC input module.
* Batterycondition cannot be checked when the USB
output module is being charged by the AC input
module, or supplying power
to a portable device.
To supply power to a portable
deviceusing the USB output
module
Be sure to unplug the AC input module from the wall
outletbefore connecting the
USB output module to a
portable device.
1.
Connect a USB charging cable (officially
supported by the portable device) to the
portable device.
2.
Connect the other end of the cable to the USB
output port of the USB output module.
3. Press the button on the USB output module.
The USB output indicator turns on.
* Power supplystops automatically when the
portable device
is fully charged. If you want to stop
the power supply, disconnect the
USB charging
cable, or press the button
on the USB output
module.
If you press the button whenboth USB
output ports are in use, both ports will stop
supplying power.
* For some devices, the USB output indicator will
not turn off and power supply will continueeven if
fully charged. In this case, press thebutton
to stop
supplying power.
Notes
• The USB output port of this product is a power supply
only. Do not connect to the
USB ports of computers,
etc. Doing so maycause a malfunction.
•
USB poweroutput of this product is max. 1 A (total of
two USB outputports). The power safety feature will
stop power supply if the total output exceeds 1 A.
Ifboth USB output ports are used, disconnect one of
~e portable,de'?ces from its USB outputport, and
USB output module (CP-2L)
Output USB output port: 5 V, 0.5 A x 2
Dimensions
58 x 84.5 x 26.4 mm (W /H/L)
Weight Approx.
145 g
Operatingtemperature
o·c. 35 ·c
Remaining batterycapacity
4,000mAh
Design
and specifications are subject to change without
notice.
Troubleshooting
The remaining battery capacity indicator does not
turnon.
The usage environment is out of operating
temperature range.
-+ Use in the operating temperature range.
There is a bad connection with the plug.
-+ Clean theplug with a dry cloth.
-+ Connect it to anotherwall outlet.
The AC input module is not attached to the USB
output module firmly.
-+ Attach the AC input module to the USB output
module firmly (until it clicks).
The AC input indicator flashes quickly.
The AC input module or USB output module is
malfunctioning.
-+ Stop use. Contact your Sony dealer or authorized
Sonyservice facility.
Charging time of the USB output module is short
(charging takes less than 5 hours).
The remaining battery capacity of the USB output
module is high.
-+ Press thebutton on the USB output module to
check the remaining batterycapacity.
The USB output module has reached the end of its
service life or is malfunctioning.
-+ When the supply time is extremelyshort even when
the
USB output module is fully charged, the USB
output module has reached the end of its service
life. Purchase a new product (service life varies
depending on use).
-+ If a malfunction occurs, contact your Sony dealer
or authorized Sonyservice facility.
The usage environment is out of operating
temperature range.
-+ Use in the operating temperature range.
1beUSB output module cannot supply power to the
portable device or the USB output indicator does
notturnon.
The button on the USB output module was not
pressed.
-+ Press thebutton.
The usage environment is out of operating
--temparature range.
-+ Use in the operatingtemperature range.
The portable device Js not in charging mode.
-+ Check and sei up theportable device in charging
mode.
-+ Turn the portable device on before charging.
The portable device needs a dedicated battery
charger or cable.
-+ Use a dedicated battery charger or cable to supply
power to theportable device.
You may be using the USB output module with the
AC input module connected to a wall outlet.
-+ Unplug the AC input module from thewall outlet.
The supply time to the portable device is short.
The USB output module is out of power or the
remaining battery capacity is low.
-+ Charge the USB output module using the AC input
module.
Terminal
on the portable device or the USB output
ports on the USB output module is dirty.
-+ Clean it with a dry cloth.
The usage environment is out of operating
temperature range.
-+ Use in the operating temperature range.
The USB output module has reached the end of its
service life or is malfunctioning.
-+ When the supply time is extremelyshort, even
when the
USB output module is fully charged, the
USB output module has reached the end of its
service life. Purchase a new product (service life
varies depending
on use).
-+ If a malfunction occurs, contact your Sony dealer
or authorized Sonyservice facility.
The USB output indicator flashes slowly.
Lowbattery.
-+ Charge the USB output module using the AC input
module.
The USB output indicator flashes rapidly.
USB power output exceeds 1 A.
-+ Ifboth USB output ports are in use, disconnect one
of the portable devices from one of the USB output
ports
and press the button of USB output module to
restart.
If onlyone USB output port is used, make sure that
the power specification
of theportable device is
within 1 A.
You cannot connect the USB charging cable to the
USB output module.
You may have connected a different type cable.
-+ Use the correct USB charging cable.
The USB charging cable is not connected properly.
-+ Connectthe USB charging cable properly.
Some dust, etc., may be in the USB output port.
-+ Remove them.
Contactyour Sony dealer
or authorized Sony service
facility for any further questions.
Warnina
-

--lftmmnpmNll1allf~·ä:11ywheretü"füpjiiypGwefiO---~~r-----~ --- -- ---
portable devices (music players, game players or • Before connectinga port~ble device to tbis product,
mobile phones, etc.). The
USB output module can be attach tbe p~rtable _d~ces batterypack. Connectmg a
charged approx. 500 times*. portabledevice while
1ts battery 1s remov~d may cause
•
The data is approximate, based on tbe results of loss of data or damage to tbe portable deV1ce.
tests by Sony. The number of times you can • lt is cautioned tbat some portab~e devic~s may incur
recharge tbebatteries depends
on tbe device and/ sudden loss of mput memorywitb or without a battery
or usage conditions. charger (for details, refer to tbe user manual supplied
@ Compatible with USB authentication witb theportable device). Before using this product, be
USB Portable Power Supply will automatically ;ure t~_ba~ up the mput memory. Sony 1s not hable for
authenticate
to tbe USB output port on tbe oss 0 mpu memory.
application devices for instant charging.
Charging Time
@ High-capacity built-in Li-ion rechargeable .--------------T-----.
battery (typ. 4,000 mAh)
© Simultaneous power supply to up totwo devices
@ Worldwide voltage AC inputmodule (AC 100 V-
240 V)
@ Safety functions of USB output module
-Overcharge preventionfunction
-Safety timer
-Abnormal temperature detection function
Please read the following instructions
carefully before
use.
Parts
f'.i.1 AC input module
IIIJoining terminal
12:] Plug
ID USB output module (Built-in Li-ion rechargeable
battery)
III USB output indicator (green)
12:] Button to stop/start USB power and to check
remainingbatterycapacity
~
USB output port
AC input indicator (orange)
Remaining batterycapacity indicator (orange)
Reference chart for the LED indicators'
status
AC input indicator (orange)
This indicator shows charging conditions of the USB
output module.
Built-in Battery
3.6 V x 2
(typ. 2,000 mAh Imin. 1.900 mAh)
Charging
Time
Approx. 5
hours
• The charging time is calculated based on use in an
arnbient temperature
of 10 °C - 30 °C.
SupplyTime
USB output port
2 USB outputports total:
lA(Max)
SupplyTime
Approx. 120 minutes
* Supplytime varies depending on thebattery condition,
storage condition
and portable device.
* The USB output indicatorflashes and power supply is
stopped
if tbe combined output of thetwo USB output
ports exceeds 1
A. Check tbat the input current of the
connected device(s) does not exceed 1
A. lftwo devices
are connected, disconnect one
of the portable devices
from its
USB output port and restart.
Handy usagetips for this product
• To optimize charging capacity, charge the USB output
module
in a temperature between 10 °C -30 °C.
• While charging. TV, radio or tuner interference may
occur. Use a wall-outlet away from these products.
• Some portable devices may require that you set a
charging mode. Fordetails, refer
to tbe user manual
supplied with the device.
·Specifications
AC input module (CP-A)
Input AC 100 V-240 V, 50/60 Hz. 7 W
Dimensions 58 x 56 x 21.5
mm (W/H/L)
(except power plug)
Charging output
4.1 V, 1.1 A
Weight Approx.
45 g
Operating temperature
0°C-35°C
- --------;-D~-;;ot~hort-ci;-;tlt th~USB--;;;-;i;;;;~ mod.:tl~. To avoid
short-circuiting, keep the
USB output module away
from all metal objects (e.g. coins, hair-pins, keys, etc.).
• The AC input module
and USB outputmodule may
become hot when charging. This
is normal. Use
caution when handling.
•
Use this productproperly to avoid electric shock.
CAUTION
• The AC input module should be disconnected from tbe
a wall outletwhen tbe charging process is complete or
when theproduct is
not in use.
• Do
not drop, place heavy weight on, or allow strong
impact
to tbis product.
• Do
not heat the USB output module ordispose of it in
fire.
• Do
not disassemble or reassemble this product.
• This appliance
is not intended for use bypersons
(including children) with reduced physical, sensory
or
mental capabilities, or Jack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised
to ensure that tbey do
not play witb tbe appliance.
• OperatingTemperature: O°C -35 °C.
To optimize
charging capacity, charge tbe
USB output module in
temperatures between 10 °c -30 °C.
• Do
not expose tbis product to direct sunlight or water.
• Keep away from high temperatures
or humidity.
• While in use, do not cover this product with materials
such as blankets.
Thecontact surface
of tbe USB output module and tbe
AC input module must always be kept clean.
The
USB output module is not charged. lt is necessary to
charge it before using tbis product for tbe first time.
Notes on using this product
• Charge tbe USB output module away from a TV, radio
or tuner as noise may occur.
• For details on operation of tbe portabledevice, refer to
its user manual. Operation varies depending on the
device.
• Do not insert any metal objects (hair-pins, keys, etc.)
into tbe
USB output port, or joining terminals of the
AC input module or USB output module to avoid
short-circuiting.
• Do
not connect theAC input module to a travel
voltage converter.
• Do not expose this product to liquid and use it ifit
remains moist.
• Do not charge tbe USB output module using an AC
adapter otber than tbe AC input module.
•
Use caution not to pinch your fingers between the AC
input module and USB output module when attaching.
• Connect tbe plug into a wall outlet firmly.
• Do not touch theplug witb your wet hand.
• Do
not break tbe plug.