Sony SCPH-10420 U User manual

DVD Remote Control
(for PlayStation ® 2)
Télécommande DVD
(pour PlayStation ® 2)
Control Remoto de DVD
(para PlayStation ® 2)
Instruction manual
Thank you for purchasing the DVD remote control (for PlayStation®2). Before
using this product, carefully read this manual and retain it for future reference.
Refer also to the PlayStation®2 console instruction manual.
This DVD remote control is exclusively for use with the PlayStation®2 computer
entertainment system.
Mode d’emploi
Nous vous remercions d’avoir fait l’acquisition de la télécommande DVD (pour
PlayStation®2). Avant d’utiliser ce produit, lisez attentivement ce mode d’emploi
et conservez-le pour pouvoir vous y reporter ultérieurement.
Reportez-vous également au mode d’emploi de la console PlayStation®2.
Cette télécommande DVD est conçue pour une utilisation exclusive avec le
système de loisir interactif PlayStation®2.
Manual de instrucciones
Gracias por adquirir el control remoto de DVD (para PlayStation®2). Antes de
utilizar este producto, lea detenidamente este manual y consérvelo para
consultarlo en el futuro. Consulte también el manual de instrucciones de la
consola PlayStation®2.
Este control remoto de DVD ha sido diseñado para utilizarse exclusivamente
con el sistema de entretenimiento computarizado PlayStation®2.
SCPH-10420 U/97076
3-084-589-12(1)

2
WARNING
Information
For customers in the USA
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.

3
US
Table of contents
WARNING ............... 2
Precautions............ 4
Setup ...................... 6
Checking the package contents .......... 6
Inserting batteries into the DVD
remote control ............................... 6
About the IR receiver ......................... 7
About the Z OPEN/CLOSE button .. 7
Playing a DVD video
............................... 8
Starting DVD video playback ............ 8
Ending DVD video playback ............. 9
Using the DVD remote control ........ 10
Using the DVD disc menu ............... 14
Playback in desired order
(Program Play) ........................... 14
Playback in random order
(Shuffle Play).............................. 16
Repeated playback
(Repeat Play) .............................. 18
Repeated playback of a selected scene
(A-B Repeat) .............................. 20
Playback from the last stopping point
(Resume Play) ............................ 21
Settings and
adjustments for the
DVD player ........... 22
Changing the audio language ........... 22
Changing the viewing angle ............ 22
Displaying subtitles ......................... 23
Selecting a specific scene for
playback ...................................... 23
Displaying playback information..... 24
Finding a particular point on a disc
(Search) ...................................... 25
Playing in Slow-motion ................... 26
Playing an audio CD
............................. 27
Operating the CD player .................. 27
Playback in desired order
(Program Play) ........................... 27
Playback in random order
(Shuffle Play).............................. 28
Repeated playback
(Repeat Play) .............................. 29
Displaying playback information..... 31
Troubleshooting ... 32
Specifications ...... 34
LIMITED WARRANTY
............................. 35

4
Precautions
Safety
This product has been designed with the highest concern for safety.
However, any electrical device, if used improperly, has the potential for
causing fire, electrical shock or personal injury. To help ensure accident-
free operation, follow these guidelines:
•Observe all warnings, precautions and instructions.
•Do not use the device if it functions in an abnormal manner.
• If the device does not function properly, contact our technical support line
at 1-800-345-7669 for assistance.
Use and handling
•Do not expose the DVD remote control to high temperatures, high
humidity or direct sunlight (use in an environment where temperatures
range 5°C - 35°C/41°F - 95°F).
•Do not allow liquid or small particles to get into the DVD remote control.
•Do not use the DVD remote control in dusty, smoky or humid locations.
•Do not put heavy objects on the DVD remote control.
•Never disassemble or modify the DVD remote control.
•Do not throw or drop the DVD remote control, or subject it to strong
physical shock.
•When cleaning the DVD remote control, use a soft, dry cloth. Do not use
benzene, paint thinner or other chemicals.
•Do not use two or more DVD remote controls at the same time.
•Some PlayStation®2 or PlayStation®format software may not function
properly when operated using the DVD remote control.
•The DVD remote control will not work if you push more than one button
at a time.

5
US
Battery use
•Never throw batteries into a fire.
•Do not use batteries other than those specified (size AAA), and always
replace with the same type of battery. Do not mix old and new batteries.
•Insert batteries with the plus and minus ends in the correct direction.
• Remove batteries when they have reached the end of their life, or if the
DVD remote control is to be stored for a long period of time.
WARNING
•Do not touch material from a leaking battery
Contact of the material with the eyes or body can result in injury or burns to
the eyes or skin. Even if foreign substances are not immediately visible,
chemical changes in the material can result in injuries occurring at a later
time.
•If you do come in contact with material from a leaking
battery, take the following actions:
– If the material gets into the eyes, do not rub. Flush the eyes with clean water
and immediately seek medical attention.
–If the material comes into contact with the skin or clothes, rinse the affected
area thoroughly with water. Consult your doctor if inflammation or soreness
develops.

6
Setup
zChecking the package contents
Check that you have the following items:
•DVD remote control (for PlayStation®2) (1)
•Size AAA batteries (2)
•Instruction manual (1)
If any items are missing, contact our technical support line at
1-800-345-7669.
zInserting batteries into the DVD remote
control
Insert the two, size AAA batteries (supplied) into the DVD remote control
paying attention to the plus and minus ends (polarity) as indicated in the
battery compartment.
Warning
Incorrect use of batteries can result in battery content leakage. When using batteries,
follow these precautions:
–Make sure that the plus and minus ends of the batteries are inserted in the correct
directions.
–Do not mix old and new or different types of batteries.
–Do not attempt to recharge non-rechargeable type batteries.
– Remove the batteries when the DVD remote control will not be used for an
extended period of time.
–If battery contents have leaked, carefully remove all residue before inserting new
batteries.

7
US
zAbout the IR receiver
This DVD remote control is intended for use with PlayStation®2 consoles
with a built-in IR receiver.
When using the DVD remote control, point the IR transmitter end of the
DVD remote control at the IR receiver of the console. Refer to the diagrams
below for IR receiver location.
Note
For best results, do not expose the IR receiver on the PlayStation®2 console front to
direct sunlight or other bright lights as this may affect DVD remote control
operation.
PlayStation®2 system
(SCPH-50000 series) PlayStation®2 system
(SCPH-70000 series)
IR receiver IR receiver
zAbout the Z OPEN/CLOSE button
The SCPH-70000 series PlayStation®2 console is not compatible with the
Z open/close button of the DVD remote control.

8
Playing a DVD video
Note on playback operations of DVD video
The PlayStation®2 console plays back DVD video as originally designed by the
software producers.
Some of the playback features of the PlayStation®2 console and the DVD remote
control (for PlayStation®2) may not have been incorporated into the DVD video
design. As a result some playback features may not be available with certain
software. Refer to the instructions supplied with your DVD video for details.
zStarting DVD video playback
1Turn on the PlayStation®2 console.
2Press the Z open/close button of the DVD remote control to
open the disc tray.
If you are using an SCPH-70000 series console, press the A (open)
button on the console front.
3Place the DVD.
Set the DVD with the label side facing up (data side down).
4Press the Z open/close button of the DVD remote control to
close the disc tray.
If you are using an SCPH-70000 series console, manually close the disc
cover.
Playback begins.

9
US
zEnding DVD video playback
1Press the Zopen/close button of the DVD remote control to
open the disc tray.
If you are using an SCPH-70000 series console, press the A (open)
button on the console front.
2Remove the DVD.
3Press the Z open/close button of the DVD remote control to
close the disc tray.
If you are using an SCPH-70000 series console, manually close the disc
cover.
4Press and hold the I/1(on/standby)/reset button of the DVD
remote control for more than three seconds.
The console enters standby mode.
Note
To save changes made during playback, you must stop playback* or remove the
DVD before resetting or turning off the console.
Note that changes will not be saved if you reset or turn off the console before
stopping playback, or without first removing the DVD.
*Includes stopping playback during Resume Play.

10
Playing a DVD video (continued)
zUsing the DVD remote control
You can access all basic DVD player functions directly using the function
buttons of the DVD remote control. For a detailed explanation of each
function see pages 11-13.
You can also use the DVD remote control to display and navigate the on-
screen Control Panel as described below. This allows you to adjust DVD
player settings not accessible directly through the DVD remote control.
Refer to the PlayStation®2 console instruction manual for details on the
functions of the Control Panel.
Display or turn off DISPLAY button/SELECT button
Enter ✕button/ENTER button
Cancel abutton
Select Directional buttons
Note
Some buttons of the DVD remote control (for PlayStation®2) may not work when
the Control Panel is displayed on the screen. To use these buttons you must clear the
Control Panel from the screen. Press the DISPLAY button repeatedly until the
Control Panel is cleared.
abutton
(cancel)
123
456
78
0
9
R 3
ENTER
DVD/
PLAYSTATION
R 1 L 1
R 2 L 2
L 3
AUDIO
OPEN/
CLOSE
RESET
SHUFFLE
ANGLE PROGRAM
SUBTITLE REPEAT
CLEAR TIME
SCAN
SLOW
PREV A-BNEXT
PLAY STOPPAUSE
DISPLAY
TOP MENU
SELECT START
MENU RETURN
DISPLAY
button
Directional
buttons
SELECT
button
✕button
(enter)
the Control Panel

11
US
123
456
78
0
9
R 3
ENTER
DVD/
PLAYSTATION
R 1 L 1
R 2 L 2
L 3
AUDIO SHUFFLE
ANGLE PROGRAM
SUBTITLE REPEAT
CLEAR TIME
SCAN
SLOW
PREV A-BNEXT
PLAY STOPPAUSE
DISPLAY
TOP MENU
SELECT START
MENU RETURN
OPEN/
CLOSE
RESET
1ZOPEN/CLOSE Opens or closes the console disc tray.
This button cannot be used with SCPH-70000
series consoles.
2AUDIO button Displays and changes DVD audio options.
3PROGRAM button Displays the Program Setup screen.
4ANGLE button Displays and changes DVD viewing angle options.
5REPEAT button Selects repeated playback of all the titles on the
disc, or one title or chapter.
6SUBTITLE button Displays and changes DVD subtitle options.
7CLEAR button Clears selected numbers or playback modes.
8 / SLOW Changes to slow-motion playback.
9 / SCAN Fast forwards or fast reverses playback on the
screen to locate a particular scene.
button
The functions of the DVD remote control buttons are described below.
button
button

12
Playing a DVD video (continued)
0./>Returns to the beginning of the current or
previous chapter./Skips to the beginning of the
next chapter.
qa HPLAY button Starts playback.
qs TOP MENU button Displays the disc menu of DVD-Video discs.
The content of the menu varies from disc to disc.
qd DISPLAY button Displays the Control Panel.
qf Directional buttons Used to select items displayed on the screen.
qg SHUFFLE button Starts playback of titles or chapters in random
order.
qh Number buttons Used to select numerical items displayed on the
screen.
qj I/1/RESET button Used to turn on, reset, and set the PlayStation®2
console in standby mode.
•On:Press once
•Reset : Press for about one second
•Standby mode :Press and hold down for more
than three seconds
qk TIME button Displays the current title or chapter number, and
the elapsed or remaining time.
ql A-B button Specifies a scene for playback, and starts
playback of the scene that has been set.
w; XPAUSE button Pauses and resumes playback.
wa xSTOP button Stops playback.
ws MENU button Displays the disc menu of DVD-Video discs.
The content of the menu varies from disc to disc.
wd ORETURN Returns to the previously selected screen within
the disc menu of DVD-Video discs.
PREV/NEXT
buttons
button

13
US
wf ENTER button Enters the item selected on the DVD disc menu
or the on-screen Control Panel.
wg These buttons perform the same functions as the
buttons of the analog controller
(DUALSHOCK®2) when playing a DVD video
or using the Control Panel.
These buttons also provide limited game control
functionality for current PlayStation®2 and
PlayStation®format software.

14
Playing a DVD video (continued)
zUsing the DVD disc menu
Some DVDs allow you to select disc contents from a menu. When you play
such DVDs, you can select playback items, the language for the subtitles,
the language for the audio, and other options using the menu.
1Press the MENU or TOP MENU button.
The menu is displayed. Menu content may vary depending on the DVD.
2Use the directional buttons to select an item, and press the
✕button.
To return to the previous screen in the DVD disc menu
Press the ORETURN button.
This function may not be available on some DVDs.
Notes
•Some DVDs do not have a menu.
•Some DVDs may refer to the menu as “DVD Menu”, “Title Menu” or “Titles”.
zPlayback in desired order (Program Play)
You can create a program to play back titles and chapters in any order you like.
1Press the PROGRAM button.
The Program Setup screen is displayed.
2Press the ✕button or the right directional button.
The numbers for titles recorded on the DVD are displayed.
3Use the directional buttons to select the title number, and
press the ✕button.
The numbers for chapters within the selected title are displayed.
4Use the directional buttons to select the chapter number,
and press the ✕button.
5Repeat steps 2-4 to set other titles or chapters.
6Press the START button.
Program Play begins.

15
US
Program Play settings are saved and remain in effect even after playback
ends. Press the PROGRAM button to display the Program Setup screen, and
then press the START button to play the programmed sequence again.
To check playback settings
During playback, press the TIME button. Icons for currently set playback
modes are displayed in the top right corner of the screen.
Changing or clearing Program Play settings
1Press the PROGRAM button.
2Use the directional buttons to select the item number you
want to change, and press the ✕button.
3Use the directional buttons to select the title number you
want to play, and press the ✕button.
4Use the directional buttons to select the chapter number you
want to play, and press the ✕button.
To clear an item, select “Clear” at step 3, and press the ✕button.
To clear all Program Play settings
1Press the PROGRAM button.
2Use the directional buttons to select “Clear all”, and press
the ✕button.
To use Program Play with Shuffle Play or Repeat Play
•Program Play with Shuffle Play
During playback in Program Play mode, press the SHUFFLE button.
Shuffle Play is turned on. When Shuffle Play is used with Program Play,
Shuffle Play options are limited to “Shuffle On” and “Shuffle Off”.
•Program Play with Repeat Play
During playback in Program Play mode, press the REPEAT button.
Repeat Play is turned on. When Repeat Play is used with Program Play,
Repeat Play options are limited to “Repeat On” and “Repeat Off”.

16
Playing a DVD video (continued)
For details on Shuffle Play and Repeat Play, see “Playback in random order
(Shuffle Play)” on page 16, and “Repeated playback (Repeat Play)” on page
18.
To clear all playback settings and return to normal
playback
Press the CLEAR button.
Notes
•Program Play settings cannot be changed while playing in Program Play mode.
•A-B Repeat is cleared when Program Play is set.
• Program Play may not be available on some discs.
• Only the number of titles and chapters recorded in the disc will displayed on the
screen.
•Program Play is stopped when:
–A-B Repeat is set.
–The DVD disc menu is displayed.
•Program Play settings are cleared when:
– The Zopen/close button of the DVD remote control or the A(open) button on
the console front is pressed.
–The console is reset or goes into standby mode after the I/1(on/standby)/reset
button of the DVD remote control or the 1(standby)/reset button on the
console front has been pressed.
zPlayback in random order (Shuffle Play)
The console will select a random order to play titles and chapters.
Playback order will be different each time Shuffle Play is used.
1During playback, press the SHUFFLE button.
The screen will display the following shuffle modes in turn each time
the button is pressed. Shuffle Play will begin as soon as the playback
mode is selected.
Title Shuffle (Playback of titles in random order)
Chapter Shuffle (Playback of chapters in random order)
Shuffle Off (Clear Shuffle Play)

17
US
To check playback settings
During playback, press the TIME button. Icons for currently set playback
modes are displayed in the top right corner of the screen.
To end Shuffle Play
Press the SHUFFLE button until “Shuffle Off” is displayed.
To use Shuffle Play with Program Play or Repeat Play
•Shuffle Play with Program Play
During playback in Shuffle Play mode, press the PROGRAM button. Set
the desired program settings, and then press the START button. Shuffle
Play is turned on. When Program Play is used with Shuffle Play, Shuffle
Play options are limited to “Shuffle On” and “Shuffle Off”.
•Shuffle Play with Repeat Play
During playback in Shuffle Play mode, press the REPEAT button. Repeat
Play is turned on. When Repeat Play is used with Shuffle Play, Repeat
Play options are limited to “Repeat On” and “Repeat Off”.
For details on Program Play and Repeat Play, see “Playback in desired
order (Program Play)” on page 14, or “Repeated playback (Repeat Play)” on
page 18.
To clear all playback settings and return to normal
playback
Press the CLEAR button.
To set Shuffle Play when a disc is not playing
Press the SHUFFLE button until the desired shuffle mode is displayed.
Press the HPLAY button, and Shuffle Play begins.

18
Playing a DVD video (continued)
Notes
•A-B Repeat is cleared when Shuffle Play is set.
• Shuffle Play may not be available on some discs.
•Shuffle Play is cleared when:
–A-B Repeat is set.
–The DVD disc menu is displayed.
– The Zopen/close button of the DVD remote control or the A(open) button on
the console front is pressed.
–The console is reset or goes into standby mode after the I/1(on/standby)/reset
button of the DVD remote control or the 1(standby)/reset button on the
console front has been pressed.
•When Chapter Shuffle is selected, up to 200 chapters can be played in random
order. If the disc has more than 200 chapters, 200 chapters will be selected at
random.
zRepeated playback (Repeat Play)
All of the titles on the DVD, or one title or chapter can be repeatedly played
back using Repeat Play.
1During playback, press the REPEAT button.
The screen will display the following repeat modes in turn each time
the button is pressed. Repeat Play will begin as soon as the repeat
playback mode is selected.
Disc Repeat (Repeated playback of all titles)
Title Repeat (Repeated playback of one title)
Chapter Repeat (Repeated playback of one chapter)
Repeat Off (Clear Repeat Play)
To check playback settings
During playback, press the TIME button. Icons for currently set playback
modes are displayed in the top right corner of the screen.

19
US
To end Repeat Play
Press the REPEAT button until “Repeat Off” is displayed.
To use Repeat Play with Program Play or Shuffle Play
•Repeat Play with Program Play
During playback in Repeat Play mode, press the PROGRAM button and
make program selections. Press the START button, and Repeat Play is
turned on. When Program Play is used with Repeat Play, Repeat Play
options are limited to “Repeat On” and “Repeat Off”.
•Repeat Play with Shuffle Play
During playback in Repeat Play mode, press the SHUFFLE button.
Repeat Play is turned on. When Shuffle Play is used with Repeat Play,
Repeat Play options are limited to “Repeat On” and “Repeat Off”.
For details on Program Play and Shuffle Play, see “Playback in desired
order (Program Play)” on page 14, or “Playback in random order (Shuffle
Play)” on page 16.
To clear all playback settings and return to normal
playback
Press the CLEAR button.
To set Repeat Play when a disc is not playing
Press the REPEAT button until the repeat mode you want is displayed.
Press the HPLAY button. Repeat Play begins.
Notes
•A-B Repeat is cleared when Repeat Play is set.
• Repeat Play may not be available on some discs.
•Repeat Play is cleared when:
–A-B Repeat is set.
– The Zopen/close button of the DVD remote control or the A(open) button on
the console front is pressed.
–The console is reset or goes into standby mode after the I/1(on/standby)/reset
button of the DVD remote control or the 1(standby)/reset button on the
console front has been pressed.

20
Playing a DVD video (continued)
zRepeated playback of a selected scene
(A-B Repeat)
You can set a specific section of the disc to be repeatedly played back.
1During playback, press the A-B button at the point you want
to start repeated playback.
The starting point (point A) is set.
2Press the A-B button at the point you want to end repeated
playback.
The ending point (point B) is set, and repeated playback of the section
from A to B begins.
To check playback settings
During playback, press the TIME button. Icons for the currently set
playback modes are displayed in the top right corner of the screen.
To end A-B Repeat Play
Press the CLEAR button.
Notes
•A-B Repeat may not be available on some discs or some sections of a disc.
•The A-B Repeat function can be set for only one section at a time.
•A-B Repeat cannot be set to select a section of video that includes content from
more than one title.
• A-B Repeat is cleared when:
–Program Play, Shuffle Play, or Repeat Play has been set.
–Playback has been stopped.
–The DVD disc menu is displayed.
– The Zopen/close button of the DVD remote control or the A(open) button on
the console front is pressed.
–The console is reset or goes into standby mode after the I/1(on/standby)/reset
button of the DVD remote control or the 1(standby)/reset button on the
console front has been pressed.
•When A-B Repeat is set, Program Play, Shuffle Play, and Repeat Play are cleared.