Sony SNC-RX550N - IPELA Network Camera User manual

Network Cameras
SNC-RX550N
SNC-RX550P

2
Sony introduces a new addition to its Network Camera Lineup, the SNC-RX550
*1
Network Dome Camera, which combines the latest image processing technology to
provide multiple compression formats and advanced functionality with a high-speed
PTZ (Pan/Tilt/Zoom) capability.
This camera can freely and endlessly rotate 360 degrees, allowing users to monitor
almost anywhere surrounding the camera using this single unit. In addition,
equipped with a powerful 26x optical zoom, the camera allows users to zoom in on
small or distant objects with exceptional clarity. Designed for 24/7 operation, the
SNC-RX550 incorporates a Day/Night function, providing clear images even in 0 lx
*2
lighting conditions. And using advanced image processing technology, the camera
provides three compression formats; JPEG, MPEG-4, and H.264
*3
, so that users can
choose the appropriate compression format to match the network environment and
monitoring applications. The SNC-RX550 also includes a newly developed “Dual
Encoding Capability” to allow simultaneous streaming in JPEG and MPEG-4, further
expanding monitoring applications.
Combining other intelligent features, such as Advanced Video Motion Detection and
Unattended Object Detection into its stylish body, the SNC-RX550 is the right
choice for a wide variety of surveillance and monitoring applications.
*1 The SNC-RX550 refer to both the SNC-RX550N (NTSC model) and the SNC-RX550P (PAL model).
*2 0 lx means absence of visible light to the naked eye. A separate IR illuminator, available through
third party vendors, is required for the camera to operate in 0 lx conditions.
*3 H.264 compressed video cannot be viewed using a browser. This function will be available with a
software upgrade in the future.
The High-Performance Network Camera
With 360-Degree Endless Rotation
Delivers Efficient 24/7 Monitoring Operation –
Anytime, Anywhere, Anyplace.

3
FEATURES
Selectable JPEG, MPEG-4,
H.264*4 Compression Formats
The SNC-RX550 supports three compression formats,
JPEG, MPEG-4, and H.264. MPEG-4 provides clear
moving images efficiently over networks even with
limited network bandwidth. For higher compression,
when bandwidth is even more limited, H.264, which
achieves two times more compression than MPEG-4,
is available. If high quality still images are preferred,
then the industry standard JPEG compression format
is selectable. The image size can be selected from
three modes to meet your network environment and
application requirements.
*4 H.264 compressed video cannot be viewed using a
browser. This function will be available with a software
upgrade in the future.
High Frame Rate
The SNC-RX550 supports a maximum frame rate of
30 fps when the image size is VGA (640 x 480) in
both MPEG-4 and JPEG modes, producing clear and
smooth-moving images. The frame rate can be set
to meet your network environment and system
requirements.
360-degree Endless Pan/Tilt/Zoom
Capability (Fig. 1, 2)
The SNC-RX550 has a high-speed 360° endless
panning (or rotation) capability and a tilt range of
90°, which allows users to precisely capture almost
any object surrounding the camera. Also, with its
powerful 26x optical zoom (312x with digital zoom),
users can zoom in on small or distant objects with
exceptional clarity.
High-Quality Images and
High-Sensitivity
Employing the latest 1/4-type Exwave HADTM CCD,
the SNC-RX550 delivers exceptional picture quality
for your remote monitoring applications. And with a
minimum illumination level of 1.0 lx at F 1.6 in color,
the camera captures high-contrast images even in
low-light conditions.
360°Endless rotation
90°Tilt
Fig. 2
26x Optical Zoom (simulated images)
Fig. 1
Pan/Tilt Range

4
"Day/Night" Function
The SNC-RX550 offers a "Day/Night" function to
provide optimized sensitivity in both day and night
environments. As the scene darkens, the infrared cut
filter is automatically replaced with a clear filter and
the camera switches to B/W mode, requiring a
minimum illumination of less than 0.15 lx. In this
mode, the camera is also sensitive to near IR
illuminators, allowing it to operate even in 0 lx*5
conditions.
*5 0 lx means absence of visible light to the naked eye.
Anti-tampering Function*6
Incorporating a digital signature technology using
Public Key Infrastructure (PKI), the SNC-RX550 allows
users to verify the origin of images and ensure the
integrity of images against tampering. This is done
by creating a digital certificate for each camera
manufactured and applying digital signatures in the
form of metadata to all images produced by that
camera; this combination assures that an image
produced by a camera is unique only to that camera.
*6 This function is available only with recording software that
complies with the Sony digital signature scheme. For more
details, please consult your nearest Sony dealer.
Dual Encoding Capability (Fig. 3)
The SNC-RX550 is equipped with a dual encoding
capability that enables the camera to generate both
MPEG-4 and JPEG images simultaneously.
For example, you can set up your system to transfer
MPEG-4 images over a WAN or an Internet VPN,
where network bandwidth is limited, while storing
high-resolution JPEG images on a server configured
on the LAN.
Image Stabilizer
The image stabilizer function minimizes the
appearance of shaky images caused by low-frequency
vibration so that stable and sharp images are
provided. This function is useful for outdoor
surveillance and traffic monitoring applications.
Fig. 3
Dual Image Encoding

5
Alarm Functions
Advanced Video Motion Detection
The SNC-RX550 is equipped with a built-in advanced
video motion detection function that can trigger a
variety of actions such as storing and transferring
images or that can trigger an external device through
its output relays. Unlike with conventional motion
detection, the SNC-RX550 utilizes the last 15 frames
to calculate motion detection information and to
trigger the alarm when motion is detected. This
prevents unwanted noise components from
accidentally triggering an alarm, providing more
accurate detection and reducing the number of false
triggers.
Unattended Object Detection*7
The SNC-RX550 can detect objects that have been
left in one place for a specified duration. Up to four
detection areas can be designated. This feature can
be useful for applications such as detecting
suspicious objects left in public spaces, or for
detecting stalled cars or accidents on the road.
*7 The unattended object detection function and motion
detection function cannot be used simultaneously.
Sensor IN/Alarm OUT ports
Equipped with two sensor inputs, the SNC-RX550
can receive triggers from external sensors. Also, two
alarm outputs can be used to trigger other devices to
perform a variety of actions.
Pre-/Post-Alarm Image Storage
The SNC-RX550 is capable of storing both pre-and
post-alarm images on removable media such as ATA
memory cards and Memory StickTM media when an
alarm is triggered.
Image Transfer Using FTP/SMTP*8
All of the pre-/post-alarm images stored at the time
of an alarm event can be transferred to an FTP server
for later viewing. Also, a still image at the time of an
alarm event can be sent to a designated e-mail
address.
*8 All images transferred using SMTP are in JPEG format.
Network Features
Simultaneous Access
Up to 20 users can simultaneously access the
SNC-RX550 and monitor images separately.
Multicasting Capability
The SNC-RX550 has a built-in multicasting capability
for MPEG-4 and H.264 video. When configured with
a multicast router, the unit can efficiently stream
video and audio to a large number of users.
Network Security Features
IP Filtering
With IP filtering, access to the SNC-RX550 can be
restricted to one or more groups of selected users.
Up to ten different groups can be established by
defining an IP address range for each group.
Password Protection
User names and passwords can be assigned to allow
five levels of access. The administrator has complete
access/control of the cameras; while the other four
levels of access can be set to limit user privileges to
functions such as PTZ control, viewing, and trigger
control.
Memory Stick Slot and PC Card Slot
Both Memory Stick and PC card slots are integrated
into the SNC-RX550, enabling you to store images
on removable media as required.
PC Card Slot
Memory Stick Slot

6
Wireless Capability
The SNC-RX550 supports the IEEE802.11b compliant
SNCA-CFW1 Wireless LAN Card when used in
combination with a Compact FlashTM Type PC card
adaptor. This type of wireless configuration can save
you time and money during installation. In addition,
the optional SNCA-AN1 External Antenna enables the
transmission of wireless signal over a longer distance.
Bi-Directional Audio
Incorporating an external microphone input, the
SNC-RX550 allows for audio as well as video
monitoring. Users can pick up the desired sound
from the preferred location. This unit is also
equipped with a speaker output, enabling users to
send an alert or make an announcement,
significantly expanding the possibilities for remote
monitoring applications. With a Voice Alert function,
you can play back an audio file using an alarm
trigger or the scheduling function.
User-Friendly GUI (Fig. 4)
The SNC-RX550 has a user-friendly GUI accessible via a
PC running the Microsoft®Internet Explorer®browser
software. Setup is very easy with intuitive icons and
pull-down menus. Directly pointing to and clicking on
any part of the monitor image in the viewer will pan
and tilt the camera so that the selected point is
centered. Also, selecting an area on the image by
holding down the left mouse button and dragging the
mouse diagonally will enlarge and center the selected
area in the monitor.
Color Variation
Users can choose from two body colors, black or
white, depending on the installation requirements of
the site.
Analog Composite Video Output
The SNC-RX550 can output an analog composite
video signal via the BNC connector on the unit's rear
panel. This feature is ideal for outputting image data
to a local recording device or monitor.
RS-232C Interface
Transparency Function
The SNC-RX550 has a transparency function available
via the RS-232C interface. External equipment can
be connected and controlled by a PC connected to
the network on which the SNC-RX550 resides.
VISCATM Protocol
The SNC-RX550 can interface with external control
equipment using the Sony VISCA protocol.
This configuration allows for local control of
Pan/Tilt/Zoom and for camera settings.
Fig. 4
Intuitive GUI Operation (simulated images)

7
OPTIONAL ACCESSORIES
SYSTEM CONFIGURATION
SNCA-CFW1
Wireless LAN Card
SNCA-AN1
Wireless LAN Antenna
(Optional accessory for the
SNCA-CFW1 Wireless LAN Card)
YT-ICB550/T
In-ceiling Mount Kit
Tinted dome
YT-ICB550/C
In-ceiling Mount Kit
Clear dome
REAR PANEL LAYOUT

© 2005 Sony Corporation. All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Some images in this catalog are simulated.
Sony is a registered trademark of Sony Corporation.
IPELA, Exwave HAD, Memory Stick, and VISCA are trademarks of Sony Corporation.
All other trademarks are the property of their respective owners.
MSD2005-454(10276V1)EXC00085 Printed in Hong Kong
Distributed by
SPECIFICATIONS
Notes: You should keep in mind that the images or audio you are monitoring may be protected by privacy and other
legal rights, and the responsibility for making sure you are complying with applicable laws is yours alone.
Access to the images and audio is protected only by a user name and the password you set up. No further
authentication is provided nor should you presume that any other protective filtering is done by the service.
Since the service is Internet-based, there is a risk that the image or audio you are monitoring can be viewed or used
by a third-party via the network.
SNC-RX550N/B SNC-RX550P/B SNC-RX550N/W SNC-RX550P/W
Camera
Image device 1/4-type Exwave HAD CCD
Number of effective pixels 380,000 (768 x 494) 440,000 (752 x 582) 380,000 (768 x 494) 440,000 (752 x 582)
Electronic shutter 1 to 1/10,000 s
Gain control Auto/Manual (-3 dB to +28 dB)
Exposure control Auto (Full auto, Shutter-priority, Iris-priority), Manual, EV compensation, Backlight compensation
White balance mode Auto, Indoor, Outdoor, One-push auto, ATW/Manual
Lens type Auto-focus zoom lens
Zoom ratio 26x optical zoom (312x with digital zoom) *Vignetting may occur at wide viewing angles under low light conditions.
Horizontal viewing angle 2.2 to 54.2 degrees
Focal length f=3.5 to 91.0 mm
F-number F1.6 (wide), F3.8 (tele)
Minimum object distance 320 mm (wide),1,500 mm (tele)
Pan angle 360 degrees endless rotation
Pan speed 300 degrees/s (max.)
Tilt angle -90 to 0 degrees
Tilt speed 300 degrees/s (max.)
Other functions Day/Night, Advanced Video Motion Detection, Unattended Object Detection, Anti-tampering, Image stabilizer, Position preset
Image
Image size (H x V) 640 x 480, 320 x 240, 160 x 120 (JPEG, MPEG-4, H.264)
Compression format JPEG, MPEG-4, H.264
Maximum frame rate
JPEG/MPEG-4
30 fps (640 x 480) 25 fps (640 x 480) 30 fps (640 x 480) 25 fps (640 x 480)
H.264 10 fps (640 x 480) 8 fps (640 x 480) 10 fps (640 x 480) 8 fps (640 x 480)
Audio
Audio compression G.711/G.726 (40, 32, 24, 16 Kb/s)
Network
Protocols TCP/IP, HTTP, ARP, ICMP, FTP, SMTP, DHCP, SNMP, DNS, NTP
Number of clients 20
Interface
Ethernet 10Base-T/100Base-TX (RJ-45)
Serial interface RS-232C (Transparency function or VISCA protocol)
Card slots PC card x1, Memory Stick x1
Analog video output BNC x1, 1.0 Vp-p, 75 1
External microphone input Mini-jack (monaural, 2.2 K12.5 V plug-in power)
Audio line output Mini-jack (monaural), max output level: 1 Vrms
Analog video output
Signal system NTSC (Composite) PAL (Composite) NTSC (Composite) PAL (Composite)
Horizontal resolution 470 TV lines 460 TV lines 470 TV lines 460 TV lines
S/N ratio 50 dB
Min. illumination Color: 1 lx (50IRE, F1.6, AGC ON), B/W: 0.15 lx (50IRE, F1.6, AGC ON)
General
Mass 2.2 kg (4 lb 13 oz)
Dimensions (W x H x D) 160 x 160 x 230 mm (6 3/8x 6 3/8x 9 1/8inches)
Body color Black White
Power requirements AC 24 V/DC 12 V
Power consumption 25 W max.
Operating temperature 0 ºC to 50 ºC (32 ºF to 122 ºF)
Storage temperature -20 ºC to 60 ºC (-4 ºF to 140 ºF)
Supplied accessories
Ceiling-mount bracket (A), Ceiling-mount bracket (B), Screws x6, Wire rope, CD-ROM (setup software), Operation manual, Installation manual
System requirements
Operating system Microsoft®Windows®2000/XP
Processor CPU: Intel®Pentium®IV 1.5 GHz or higher
Memory RAM: 256 MB or more
Web browser Microsoft Internet Explorer®Ver.5.5 or 6.0