Soozier A90-322V00 User manual

EN
120KG
Max 120kg
INapa024_CA
A90-322V00
EElllliippttiiccaall ttrraaiinneerr
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

EN
-2-

EN
-3-

EN
-4-

Using your Elliptical Trainer
Assembly:
•It is important you assemble the product in a clean and unclut-
tered space.
•We recommend you have someone assist you with the assembly,
as some components are heavy.
•Remove all the parts from its packaging and lay them out on the
floor.
2ft
2ft 2ft
2ft
EN
-5-

EN
What's in the box
-6-

EN
Component
Part No. and Description
Qty
#1 A-Frame
1
#2 Stationary Handles
1
#3 Moving Handles
2
#4a Front Foot
#4b Back Foot
#5 Screw (m10*60), Washer and Nut
1
1
4
#6 Screws (m8*40)
6
#7 Washers (m8*40)
6
#8 Soft Bumpers
2
#9 Supporting Pin
1
#10 Alan Key
1
#11 Wrench
1
#12 Progress Tracker
1
#13 Phone/Tablet Holder
1
#14 Screws
2
-7-

EN
Setting up your Elliptical trainer
Everything needed for assembly is included in your pack. Follow these
nine steps to build this product:
STEP 1
Spread legs of the A-frame and screw in the supporting pin.
-8-
1
1
9

EN
STEP 2
Attach feet using screws, washers and nuts, ensuring the back foot
has the wheels facing outwards. Use screw #5.
-9-
4a
4b
55
55

EN
STEP 3
With the legs vertical, fully depress pin and lower oversized foot-
plates. If the pin does not depress, do not force it, instead, move
the leg to release the pin and try again.
-10-

EN
STEP 4
Lift 360° legs and insert soft bumper on both sides.
88
-11-

EN
STEP 5
Attach phone/tablet holder using screws provided. Use screw #14.
13
14
-12-

EN
STEP 6
Attach stationary handles. Use screw #6 and washers #7.
26
7
-13-

EN
STEP 7
Attach wires to progress tracker, then plug in the heart rate monitor
wire and sliding tracker.
3
4
5
11
12
15
10
12
-14-

EN
STEP 8
Attach moving handles, ensuring curves face outwards. Use screw
#6 and washers #7.
3
3
6
7
-15-

EN
STEP 9
Choose your resistance level and get started.
-16-

Choose your resistance
and get started
Select your resistance level from 0-4 on each of the four legs.
For a consistent workout, ensure all four plugs are at the same
level.
The higher the number, the greater the level of resistance and
the harder the workout. Step onto the device, holding the station-
ary handles for balance.
Start moving.
EN
-17-

FR
INapa024_CA
A90-322V00
120KG
Max 120kg
INSTRUCTIONS D’ASSEMBLAGE
IMPORTANT : A LIRE ATTENTIVEMENT ET À CONSERVER POUR
CONSULTATION ULTÉRIEURE.
Vélo Elliptique

FR
-2-

FR
-3-