Sound Tube LA880i User manual

LA880i
Donotspec orinstall speaker near support  beam, ventilationduct or
otherstructu rethat may interferewithspeaker function ordispersion.
Warning
© 2012 SoundTube Entertainment, Inc. All rights reserved. PN INS-LA880i Rev 08.15.12
Warning
So undTube s peakers  must  be installed  byaprofes s ional audio  ins taller/co ntracto r.For safety  andfor
optimumaudio performa nce,  installer  mus t followall direction s  is sued  by S oundTube E ntertainment.
Euroblock connector
AC-LA8-BACK Back plate
Mounting Bolts
ConnectorPlate (Back)
Optional mounting accessories
• Allen Products MM-024
Pan and Tilt wall mount
• Allen Products PoleStar pole mount
• Allen Products MM-020X
MultiMount ceiling mount
• Allen Products SAS-1WA-20
One-Way-Array
• AC-LA8-LINK stacking adapter plate
• AC-LA8-FLY hanging adapter plate
• AC-LA8-BACK bent back plate
Box contents
1 Speaker
1 10' Safety cable
3 Black zip ties
1 AC-LA8-BACK Back plate
7 Mounting bolts (1/4-20 x 0.5")
1 Euroblock connector
Install Instructions For:
LA880i speaker
1.435.64 7.9555 |800.64 7.TUBE | www.soundtube.com
• Allen Products TCK-010-S
Fly cable kit

2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
1. Unpackspeaker. 3. Attach Allen Products
MM-024 speaker adapter plate
(available separately) to to rear
of speaker using supplied bolts.
See Allen Products installation
manual for more details.
4. Attach Allen Products Pan
and Tilt bracket (available
separately) to wall. Choose
a secure mounting surface with
sucient strengthto reliably
hold the speaker.
5. Attach speaker with Allen
Products speaker adapter plate
to wall plate.
6. Attach included safetycable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, refer to wiring
instructions 7-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the endofthe cable into
the SpeakOninput connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 |800.64 7.TUBE | www.soundtube.com
Surface Mount Instructions

1. Unpackspeaker. 3. Attach Allen Products
MM-024 speaker adapter plate
(available separately) to to rear
of speaker using supplied bolts.
See Allen Products installation
manual for more details.
4. Attach Allen Products Pan
and Tilt bracket (available
separately) to polestar. Choose
a secure mounting surface with
sucient strengthto reliably
hold the speaker.
5. Attach speaker with Allen
Products speaker adapter plate
to mounting plate/pole adapter.
6. Attach included safetycable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the endofthe cable into
the SpeakOninput connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 |800.64 7.TUBE | www.soundtube.com
Pole Mount Instructions
2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.

2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
1. Unpackspeaker. 3. Attach Allen Products
MM-024 speaker adapter plate
(available separately) to to rear
of speaker using supplied bolts.
See Allen Products installation
manual for more details.
4. Attach Allen Products
MM-020x mounting plate/pole
(available separately) to ceiling.
Use hardware with sucient
strength to reliably hold the
speaker.
5. Attach speaker with Allen
Products speaker adapter plate
to mounting plate/pole.
6. Attach included safetycable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the endofthe cable into
the SpeakOninput connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 |800.64 7.TUBE | www.soundtube.com
Ceiling Mount Instructions

2. Using supplied bolts, attach
included AC-LA8-BACK back
plate to rear of speaker near the
bottom of the cabinet.
WARNING: Do not exceed
100 in-lbs when installing bolts
in threaded inserts.
1. Unpackspeaker. 3. Attach AC-LA8-FLY hanging
adapter plate(optional accessory)
to leftandright sides of speaker
using bolts suppliedwith
accessory kit.
4. Hang the AllenProducts
One-Way-Array bracket fromthe
structure. Installationlocation
and hanginghardware must be
sucientlystrong to reliably hold
the speaker. See Allen Products
installation manual for more
details.
5. Attach speaker to One-Way-
Array bracket using Allen
Products ying hardware.
Cables should connect to
hanging adapter plates at the
top, and back plate near the
bottom of the cabinet.
6. Attach included safetycable
from bent bracket to secure
mounting point on structure.
Installer to supply structural
fastener.
7. Chose one of two inputs:
SpeakOn,™ or included
Euroblock. Note: If using
LA808i, reference its wiring
instructions for steps 8-11.
8. If using Euroblock input,
connect signal wire to four-pin
Euroblock plug. If using SpeakOn
connector skip to step 10.
9. Insert wired 4-pin Euroblock
jack into speaker. Connectors
are keyed for polarity. Skip to
step 11.
10. If using SpeakOn cable,
insert the endofthe cable into
the SpeakOninput connector,
and twist to lock.
11. Speaker ships with LFDE
switch in “NO” position. If
using with LA808i switch to
“YES” position.
12 . Done!
1.435.64 7.9555 |800.64 7.TUBE | www.soundtube.com
Flown Instructions
WARNING: Flownproducts must only be installed by trainedrigging professionals.