Soundcore Liberty Air 2 User manual

USER MANUAL
Soundcore Liberty Air 2

Charging
• Open or close the charging case to activate the LED battery indicator.
• Fully charge both the earbuds and the charging case before the rst-time using.
• To prevent damage, use the provided USB-C cable.
• You can charge the charging case by using a certied wireless charger (not provided).
• Fully dry off the earbuds and the USB port before charging.
< 30%
30% - 70%
> 70%
100%
or
1 2
Powering On/Off
Open the charging case, the earbuds will automatically power on.
Place the earbuds back into the charging case and close the case, the earbuds will automatically
power off.
ON OFF
1 2
• To manually power on, tap and hold the touchpad on either one of earbuds for 2 seconds
until the LED indicator ashes white once.
• To manually power off, tap and hold touchpad on either one of earbuds for 8 seconds
until the LED indicator ashes red once.

Pairing
True Wireless Stereo Connection
Open the charging case, the earbuds will automatically power on. The right earbud will
automatically connect with the left earbud.
LED behaviour (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when TWS connected or when powered on in mono
mode. You are requested to conrm the connection when you see a pop-out screen.
3
2
Soundcore
Liberty Air 2
Soundcore
Liberty Air 2
Bluetooth Pairing Request
“Headset” would like
to pair with your Phone
Cancel Pair
Pair
1
LED behaviour (Earbuds)
Rapidly ashing white Bluetooth pairing
Slowly ashing white Bluetooth connected
• In the pairing process, some devices are incompatible with Qualcomm True Wireless
Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you
tap “Pair” or even no screen popped out. Don’t worry and keep using.
• Once successfully paired, the primary earbud connects with your device and transfers
signal to the secondary earbud, the latter one will not connect with your device. As a
result, in the Bluetooth pairing list on your device, it may indicate that only one side is
connected while the other side is not.
To pair with another Bluetooth device, place the earbuds back into the charging case and
make sure they are being charged, keep the cover open, then press and hold the button on
the bottom of the charging case for 3 seconds until the LED indicators on earbuds ash white
rapidly.

21
Soundcore
Liberty Air 2
Soundcore
Liberty Air 2
3”
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
• Mono mode: When Bluetooth connected, you can use either one of the earbuds only by
putting the other one back into the charging case and closing the cover.
Wearing
1. Choose the ear tips that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
Controls
All of the controls in stereo mode can be customized in the Soundcore App.
Play / Pause
R
2 Tap twice (R)
Auto pause Automatically pause when removing either one or both
earbuds off your ear. Tap twice to resume.
Next track
L
2 Tap twice (L)
Volume up / down
• The volume up / down controls can be customized in
Soundcore App
• Control volume via the connected device

Answer / End a call
L/R
2
Tap twice (L/R)
Reject a call
L/R
2” Tap and hold for 2 seconds (L/R)
Auto Answer a call Take earbuds out of the charging case
Activate Siri or other voice
assistant software
L/R
Voice Assistant
2” Tap and hold for 2 seconds (L/R)
Mono mode (controls in mono mode cannot be customized in the App)
Play / Pause Tap twice
Answer / End a call
Reject a call Tap and hold for 2 seconds
Activate Siri or other voice control software
Soundcore App
Make sure the earbuds rmware is always the most updated before using.
Download the Soundcore App for HearID, UI customization, EQ settings and earbuds rmware
update.
• HearID: HearID maps your personal hearing sensitivity at multiple frequencies and analyzes
the results. It tailors the EQ settings and creates a personalized sound prole for you.
• UI customization: In stereo mode, all of the controls can be customized in the App. In
mono mode, the controls are xed.
• EQ settings: There’re more than 20 EQ settings you can choose in the App to optimize
your experience while enjoying different music genres.
• Earbuds rmware update: The earbuds rmware can be updated in the App. You will be
informed once the new version of firmware is detected when you connect the earbuds
with the App.

Soundcore
Apple and the Apple logo are trademarks
of Apple Inc.
Google Play and the Google Play logo are
trademarks of Google Inc.
Download the Soundcore App for HearID,
UI customization and EQ settings.
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Keep the charging case open, then press and hold the button on the bottom of the charging
case for 10 seconds until the LED indicators on both earbuds ash red 3 times.
All the memory data will be cleared.
10”
3

Specifications
Specications are subject to change without notice.
Input 5 V 500 mA
Rated output power 5 mW @ 1% THD
Battery capacity 55 mA x 2 (earbuds); 500 mA (charging case)
Charging time
1.5 hours (for earbuds); 2 hours (for charging case
via USB); 3.5 hours (for charging case via wireless
charger)
Playtime
(varies by volume level and content) 7 hours (Totally 28 hours with the charging case)
Driver size 6 mm diamond coated driver x 2
Frequency response 20 Hz - 20 kHz
Impedance 16 Ω
Bluetooth version V 5.0
Bluetooth frequency 2402-2480 MHz
Bluetooth prole AVRCP1.6, A2DP1.3, HFP1.7
Audio codec format SBC, AAC, aptX
Bluetooth range 10 m / 33 ft
Qualcomm®aptX ™ Technical specications
Compression ratio: 4:1
Word Depth: Support 16 bit and 24bit
Decoding delay: Sample Rate 48kHZ<2ms
Dynamic range: 16bit>92dB, 24bit>120dB
Data rates: 352kbps
Decode mode: Stereo
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and
other countries. aptX is a trademark of Qualcomm Technologies International Ltd., registered
in the United States and other countries.