Southern Enterprises MS9350 User manual

SOUTHERN ENTERPRISES INC.
RELAX...If you can follow a few easy, step-by-step directions
in order .YOU CAN ASSEMBLE THIS ITEM.
STYLE NO. MS9350
MEDIA STORAGE OTTOMAN
PLEASE FIND HARDWARE IN RED POLYBAG BEFORE DISCARDING PACKING MATERIAL.
HARDWARE LIST
(1) WOOD DOWEL
Ø6X25mm
12PCS
(5) METAL SUPPORT
1PC
(2) CAM-BOLT
8PCS
(6) SHORT WOOD SCREW
Ø3x12mm
10PCS
(3) CAM-LOCK 8PCS (7) LONG WOOD SCREW
Ø3x19mm
8PCS
(4) COVER
8PCS
PARTS LIST
(A) DRAWER LEFT SIDE PANEL 1PC
(G) RIGHT SIDE PANEL 1PC
(B) DRAWER FRONT PANEL 1PC
(H) BACK PANEL 1PC
(C) DRAWER RIGHT SIDE PANEL
1PC
(I) SHELF 1PC

(D) DRAWER BACK PANEL 1PC
(J) FRONT PANEL 1PC
(E) DRAWER BOTTOM PANEL 1PC
(K) CUSHION 1PC
(F) LEFT SIDE PANEL 1PC
ASSEMBLY INSTRUCTION
1. SELECTASMOOTH, SOFT SURFACE TO PREVENT SCRATCHING FINISH.
2. YOU MAY NEED A PHILLIP SCREWDRIVER.
3. INSERT LONG WOOD SCREWS (7) THROUGH PREDRILLED HOLES ON OUTSIDE OF DRAWER LEFT
SIDE PANEL (A) AND TIGHTEN INTO CORRESPONDING HOLES ON ENDS OF DRAWER FRONTAND
BACK PANELS (B, D). SLIDE DRAWER BOTTOM PANEL (E) INTO GROOVES ON INSIDE OF DRAWER
FRONTAND BACK PANELS (B, D) AND ALIGN WITH THE GROOVE ON DRAWER LEFT SIDE PANEL
(A). REPEAT SAME PROCEDURE FOR DRAWER RIGHT SIDE PANEL (C). AS FIGURE 1 SHOWN.
4. INSERT WOOD DOWELS (1), CAM-BOLTS (2) INTO PREDRILLED HOLES ON INSIDE OF LEFT AND
RIGHT SIDE PANELS (F, G) AND FIT INTO CORRESPONDING HOLES ON ENDS OF BACK PANEL (H)
AND SHELF (I). INSERT CAM-LOCKS (3) INTO BIG HOLES ON INSIDE OF BACK PANEL (H) WITH
SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (3) CLOCKWISE TO SECURE
CAM-BOLTS (2). PUSH COVERS (4) INTO CAM-LOCKS (3). AS FIGURE 2 SHOWN.
FIGURE1 FIGURE2

5. INSERT WOOD DOWELS (1), CAM-BOLTS (2) INTO PREDRILLED HOLES ON BACK OF FRONT PANEL
(J) AND FIT INTO CORRESPONDING HOLES ON FRONT EDGES OF LEFT AND RIGHT SIDE PANELS (F,
G). INSERT CAM-LOCKS (3) INTO BIG HOLES ON INSIDE OF LEFT AND RIGHT SIDE PANELS (F, G)
WITH SLOT FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS (3) CLOCKWISE TO
SECURE CAM-BOLTS (2). PUSH COVERS (4) INTO CAM-LOCKS (3). AS FIGURE 3 SHOWN.
6. INSERT SHORT WOOD SCREWS (6) THROUGH HINGES ON BOTTOM OF CUSHION (K) AND TIGHTEN
INTO PREDRILLED HOLES ON BACK PANEL (H). AS FIGURE 4 SHOWN.
7. INSERT SHORT WOOD SCREWS (6) THROUGH PREDRILLED HOLES ON METAL SUPPORT (5)AND
TIGHTEN INTO CORRESPONDING HOLES ON RIGHT SIDE PANEL (G) AND CUSHION (K). THEN
PLACE THEASSEMBLED DRAWER INTO SPACE OF UNIT. AS FIGURE 4 AND INSET SHOWN.
NOTE: PLEASE DO NOT PUSH THE METALSUPPORT (5) TO BACK WHEN OPEN/CLOSE
CUSHION (K).
FIGURE3
FIGURE4
READY
WRONG

YOUR NEW MEDIASTORAGE OTTOMAN IS FINISHED AND READY TO USE.
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to
divide parts and label them to correspond with part list. Extra hardware may be included. If any items are
missing, please contact our parts/service department at [phone] or in Dallas [phone]/ 9am –
4pm Mon-Fri Central time. Missing or damaged hardware and/ or parts will be replaced free of charge. WE
DO NOT SELL PARTS. WE DO NOT RECOMMEND MODIFYING PRODUCT(S) AND WE ARE NOT
RESPONSIBLE FOR ANY DAMAGES DUE TO PRODUCT MODIFICATION(S). If this product has not
been purchased from our retail affiliates (within 9 months), we are under no obligation to provide parts or
replacement merchandise. Parts will not be available for items arriving fully assembled.
"We will ship parts if available" "This is not a warranty"
PARTS REPLACEMENT FORM
STYLE NO:MS9350
Customer Name PARTS
LETTER PART DESCRIPTION QUANTITY NEEDED
Street, City, State, Zip
Phone#
Please indicate where you purchased this item.
Store/website/catalog
/ /
Please indicate color/size/style number
SOUTHERN ENTERPRISES INC.
P.O. Box 59996 Dallas, Texas 75229
/ /