Southern Enterprises MS163200TX User manual

Page | 1
For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]m
www.seidal.com
MS163200TX
Kylan Media Tower
Assembly Instructions
PO#:

Page | 2
Kylan Media Tower
Assembly Instructions
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Bottom Panel
C.
Quantity
of 1
Left Side Panel
D.
Quantity
of 1
Right Side Panel
E.
Quantity
of 1
Fixed Shelf Panel
F.
Quantity
of 1
Door
G.
Quantity
of 1
Front Crosspiece
H.
Quantity
of 1
Back Crosspiece
I.
Quantity
of 3
Adjustable Shelf Panel
J.
Quantity
of 1
Drawer Front Panel
K.
Quantity
of 1
Drawer Left Panel
L.
Quantity
of 1
Drawer Right Panel

Page | 3
M.
Quantity
of 1
Drawer
Back Panel
N.
Quantity
of 1
Drawer
Bottom Panel
O.
Quantity
of 1
Back Panel
1.
Quantity
of 20
Cam Bolt
2.
Quantit
y
of 20
Cam Lock
3.
Quantity
of 16
Wood Dowel Ø 8 x 30mm
4.
Quantity
of 35
Flat Head Screw
∅
1/8"
x
1/2"
5.
Quantity
of 2
Blot for Handle
∅
5/32"x3/4"
6.
Quantity
of 22
Round Head Screw
Ø 1/8” x 5/8”L
(for Back Panel and Magnet)
7.
Quantity
of 3
Hinge
8.
Quantity
of 1
Handle
9.
Quantity
of 1
Handle
10.
Quantity
of 2
M
agnet
11.
Quantity
of 1
Female Slide Left
12.
Quantity
of 1
Female Slide Right

Page | 4
13.
Quantity
of 1
Male Slide Left
14.
Quantity
of 1
Female Slide Right
15.
Quantity
of 6
Screw Ø 1/8” x 1”L
16.
Quantity
of 2
Magnet Plate
17.
Quantity
of 12
Shelf Pin
18.
Quantity
of 4
Screw
Ø 1/8” x 1-5/8”L
19.
Quantity
of 4
Flat Head Screw
Ø 1/8” x 5/8”L
(For Bracket)
20.
Quantity
of 4
Bracket
21.
Quantity
of 4
Anchor
22.
Quantity
of 2
Plastic Strap
23.
Quantity
of 8
Cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)

Page | 5
Figure 1
Screw with fingers to help align screws
before using screwdriver.
Attach Female Slide Left (11) to Left
Side Panel (C) using Flat Head Screws
(4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Figure 2
Attach Female Slide Right (12) to Right
Side Panel (D) using Flat Head Screws
(4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Attach Magnet (10) to Right Side Panel
(D) using Round Head Screw (6) as
shown.
Tighten Round Head Screw (6) with
Phillips screwdriver.
Kylan Media Tower
Assembly Instructions

Page | 6
Figure 3
Screw with fingers to help align cam
bolts before using screwdriver.
Insert Cam Locks (2) into corresponding
holes on Bottom Panel (B), Fixed Shelf
Panel (E), Front Crosspiece (G) and
Back Crosspiece (H)
Screw Cam Bolts (1) and insert Wood
Dowels (3) into corresponding holes on
Right Side Panel (D) and Left Side
Panel (C).
Attach Bottom Panel (B), Fixed Shelf
Panel (E), Front Crosspiece (G) and
Back Crosspiece (H) to Right Side Panel
(D) and Left Side Panel (C) by inserting
Wood Dowels (3) and Cam Bolts (1) into
corresponding holes until Bottom Panel
(B), Fixed Shelf Panel (E), Front
Crosspiece (G) Back Crosspiece (H)
and Right Side Panel (D) Left Side
Panel (C) meet.
Tighten by rotating Cam Locks (2)
clockwise with Phillips screwdriver.
Notice: Make sure that all finished
edges are facing towards the front of
the unit.

Page | 7
Figure 4
Insert Cam Locks (2) into corresponding
holes on assembled unit from Figure 3
Screw Cam Bolts (1) and insert Wood
Dowels (3) into corresponding holes on
Top Panel (A).
Attach Top Panel (A) to assembled unit
by inserting Wood Dowels (3) and Cam
Bolts (1) into corresponding holes until
Top Panel (A) and the assembled unit
from Figure 3 meet.
Tighten by rotating Cam Locks (2)
clockwise with Phillips screwdriver.
Figure 5
Attach Back Panel (O) to backside of the
assembled unit from Figure 4 with
Round Head Screws (6).
Tighten Screws (6) with a Phillips
screwdriver.

Page | 8
Figure 6
Attach Male Slide Left (13) to Drawer
Left Panel (K) using Flat Head Screws
(4).
Attach Male Slide Right (14) to Drawer
Right Panel (L) using Flat Head Screws
(4).
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Figure 7
Insert Cam Locks (2) into corresponding
holes on Drawer Side Panel (K) (L)
Screw Cam Bolts (1) into corresponding
holes on Drawer Front Panel (J).
Attach Drawer Side Panel (K) (L) to
Drawer Front Panel (J) by inserting Cam
Bolts (1) into corresponding holes until
Drawer Side Panel (K) (L) and Drawer
Front Panel (J) meet.
Tighten by rotating Cam Locks (2)
clockwise with Phillips screwdriver.
Attach Handle (9) to Drawer Front Panel
(J) using Bolt for Handle (5).
Tighten Bolt for Handle (5) with Phillips
screwdriver.

Page | 9
Figure 7
Insert Drawer Bottom Panel (N) into the
grooves of assembled unit from Figure
6.
Figure 8
Attach Drawer Back Panel (M) to the
assembled unit from Figure 7 using
Screws (15).
Tighten Screws (15) with Phillips
screwdriver.

Page | 10
Figure 9
Cover Cam Locks with Cover (23) as
shown.
Insert drawer into assembled unit.
F igure 10
Attach the Metal Plate (16) on the inner
inside of the Door (F) using Flat Head
Screws (4)
Attach the Hinges (7) to the Door (F)
using Flat Head Screws (4)
Tighten Flat Head Screws (4) with
Phillips screwdriver.
Attach the Door Handle (8) to the door
using Bolt for Handle (5).
Tighten Bolt (5) with Phillips screwdriver.