Southern Enterprises MS1071T0TX User manual

MS1071T0TX-ESPRESSO FINISH
MS1072T0TX-WHITE FINISH
MS1068T0TX-BLACK
SLIDING-DOOR WINDOW-PANE
MEDIA CABINET
Assembly Instruction
For assistance with assembly contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[email protected]
www.seidal.com

MS1071T0TX-ESPRESSO FINISH/MS1072T0TX-WHITE FINISH
MS1068T0TX-BLACK
SLIDING-DOOR WINDOW-PANE MEDIA CABINET
Please review all parts and hardware before disposing of any packaging. Call Customer Service if missing
hardware. Do not return to store/retailer. Using a screw that is too long will cause damage. Before beginning
assembly, separate each type of screw. Carefully study the screw diagrams below.You may receive extra
hardware with your unit.
A
TOP PANEL
B
LEFT SIDE PANEL
C
RIGHT SIDE PANEL
D
BASE
E
FIXED SHELVES
F
ADJUSTABLE SHELVES
G
RIGHT BACK PANEL
H
LEFT BACK PANEL
I
LEFT DOOR
J
RIGHT DOOR
1
CAM LOCK
2
COTTON MAT
3
CAM BOLT
4
BOLT
5
BARREL NUT
6
SHELF SUPPORTS
7
SCREW 1/8”x1/2”
8
DOWEL
9
SCREW5/32”x1-3/4”
10
PLASTIC ANCHOR
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew the finish
on wood part. Avoid rubbing or Scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call Customer Service at 1-800-633-5096.
Do not return product to store. Please call
manufacturer for assistance, questions or
parts.
Assembly Tool Required
No.2 Phillips Screw driver
Quantity
Of 1 Quantity Of 1 Quantity
Of 1
Quantity
Of 1
Quantity
Of 2
Quantity
Of 3 Quantity
Of 4
Quantity
Of 1 Quantity
Of 1 Quantity
Of 1
Quantity
Of 1 Quantity
Of 10
Quantity
Of 10
Quantity
Of 10 Quantity Of 4 Quantity
Of 4 Quantity Of16
Quantity
Of 32 Quantity
Of 2
Quantity
Of 10 Quantity
Of 2

MS1071T
0
TX
-
ESPRESSO FINISH
MS1072T0TX-WHITE FINISH
MS1068T0TX-BLACK
SLIDING-DOOR WINDOW-PANE MEDIA CABINET
Assembly Instruction
FIGURE 1
Step 1:
PLEASE DO NOT OVER-TIGHTEN CAMBOLTS. PLEASE STOP
WHEN YOU FEEL TIGHT
PUT ALL PARTS ON A SOFT SURFACE TO PREVENT
SCRATCHES.
PLACE LEFT SIDE PANEL (B) SMOOTH SIDE ON FLAT SURFACE,
THEN SCREW 2 CAM-BOLTS (3) INTO PRETHREADED INSERT
HOLES ON SIDE PANEL (B) UNTIL STOP. (PLEASE DO NOT
OVERTIGHTEN CAM-BOLTS). ALSO PUSH 2 WOOD DOWELS (8)
INTO LARGE OPENING HOLES INTO LEFT SIDE PANEL (B).
REPEAT SAME PROCEDURE FOR RIGHT SIDE PANEL (C).
INSERT CAM-BOLTS (3), WOOD DOWELS (8) INTO PREDRILLED
HOLES ON ENDS OF FIXED SHELVES (E) AND FIT INTO
CORRESPONDING HOLES ON INSIDE OF LEFT AND RIGHT SIDE
PANELS (B, C). INSERT CAM-LOCKS (1) INTO BIG HOLES ON
INSIDE OF LEFTAND RIGHT SIDE PANELS (B, C) WITH SLOT
FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS
(1) CLOCKWISE TO SECURE CAM-BOLTS (3). PUSH COVERS (2)
INTO CAM-LOCKS (1).
INSERT WOOD DOWELS (8) INTO PREDRILLED HOLES ON BASE
(D) AND FIT INTO CORRESPONDING HOLES ON BOTTOM
EDGES OF SIDE PANELS (B, C). INSERT BARREL NUTS (5) INTO
PREDRILLED HOLES ON INSIDE OF LEFT AND RIGHT SIDE
PANELS (B, C). INSERT MACHINE SCREWS (4) THROUGH
PREDRILLED HOLES ON UNDERSIDE OF BASE (D) AND
TIGHTEN INTO BARREL NUTS (5). PLEASE NOTE THAT IF
SCREWS DO NOT TIGHTEN, ROTATE BARREL NUTS (5) SO THAT
THREADS OF BARREL NUTS (5) FACING MACHINE SCREWS (4).
INSERT CAM-BOLTS (3), WOOD DOWELS (8) INTO PREDRILLED
HOLES ON UNDERSIDE OF TOP PANEL (A) AND FIT INTO
CORRESPONDING HOLES ON TOP EDGES OF LEFT AND RIGHT
SIDE PANELS (B, C). INSERT CAM-LOCKS (1) INTO BIG HOLES
ON INSIDE OF LEFTAND RIGHT SIDE PANELS (B, C) WITH SLOT
FOR SCREWDRIVER FACING OUTWARD. ROTATE CAM-LOCKS
(1) CLOCKWISE TO SECURE CAM-BOLTS (3). PUSH COVERS (2)
INTO CAM-LOCKS (1). AS SHOWN IN FIGURE 1.

FIGURE 2- BACK VIEW SHOWN FOR ASSEMBLY PURPOSES.
FIGURE 3
Step 2:
ATTACH LEFT AND RIGHT BACK PANELS (H,
G) INTO SLOTS OF PARTS (A, B, C, D).
INSERT PAN HEAD WOOD SCREWS (7)
THROUGH PREDRILLED HOLES ON LEFT
AND RIGHT BACK PANELS (G, H) AND
TIGHTEN INTO REAR EDGES OF PARTS (A,
B, C, D, E). AS SHOWN IN FIGURE 2.
Step 3:
IN ORDER TO STAND STURDILY. DRILL TWO
3/16”DIAMETER HOLES ON WALL, THE
DISTANCE BETWEEN TWO HOLES TO BE 14”
AND SHOULD MATCH TO THE HANGING
HOLES ON BACK OF BACK PANELS (G, H).
FIT PLASTIC ANCHORS (10) INTO THE
HOLES ON WALL. USE SCREWDRIVER TO
FIT FLAT HEAD WOOD SCREWS (9)
THROUGH THE HANGING HOLES ON BACK
PANELS (G, H) INTO PLASTIC ANCHORS (10).
AS SHOWN IN FIGURE 3.
"Please mount at least 1 screw into a
wall stud. Wall anchor is not needed
when screwing directly into a wall
stud".
FIT SHELF SUPPORTS (6) INTO PREDRILLED
HOLES ON INSIDE OF LEFT AND RIGHT SIDE
PANELS (B, C). PUT ADJUSTABLE SHELVES
(F) ON EACH SHELF SUPPORTS (6)
MATCHING THE POSITION OF GROOVES ON
ADJUSTABLE SHELVES (F). AS SHOWN IN
FIGURE 3.
E
E
F
F
F
F
BC
( 9)
( 9)
WALL
( 10)
( 6)
( 6)
( 10)
G
H
14" W
E

Step 4:
FIT LEFTAND RIGHT DOORS (I, J) INTO GROOVES ON TOP PANELAND BASE (A, D). AS SHOWN IN FIGURE 4.
AFTER LOCKING THE DOORS,IF THE GAP BETWEEN SIDE PANEL(S) AND DOOR IS UNEVEN,YOU CAN ADJUST
THE SCREWS ON TWO CASTERS ON THE BOTTOM OF DOORS TO GET EVEN GAP.
FIGURE 4
( I )

We'd love to hear from you! Email us photos of our products in your home at [email protected] and we might
feature it on our site or use it to model one of our inspirational photos.
“PARTS WILL BE SENT IF AVAILABLE FROM SEI” “THIS IS NOT A WARRANTY”
Parts Replacement Form
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/ Website/ Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Please count, identify and compare parts and hardware list to be sure all parts are present. It may help to divide
parts and label them to correspond with part list. Extra hardware may be included. If any items are missing, please
contact Southern Enterprises at 800-633-5096 or in Dallas [phone]/ 9am – 4pm Mon-Fri Central time if you
have product issues with your purchase. Please ask for a customer service representative for issues involving
damages or replacement parts. Please ask for a technical assistance representative for any issues with product
assembly and product construction. Please contact the retailer that you purchased from for returns.
Missing or damaged hardware and/ or parts will be replaced free of charge. We do not sell parts. We do not
recommend modifying product(s) and we are not responsible for any damages due to product modification(s).
I
f this product has not been purchased from our retail affiliates (within 9 months), we are under no obligation to
Customer Service 1-800-633-5096
[email protected]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019