Southern Enterprises Wyndmere BC401900TX User manual

For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
[e-mail]
www.seidal.com
BC401900TX
Wyndmere Shoe Bench
Assembly Instruction
Page 1

A.
Quantity
of 1
Top Panel
B.
Quantity
of 1
Middle Vertical Panel
C.
Quantity
of 4
Vertical Panel
D.
Quantity
of 1
Lower Fixed Shelf Panel
E.
Quantity
of 1
Bottom Panel
F.
Quantity
of 1
Upper Fixed Shelf Panel
G.
Quantity
of 1
Left Frame
H
.
Quantity
of 1
Right Frame
I.
Quantity
of 1
Middle Leg
J.
Quantity
of 2
Drawer Front
K.
Quantity
of 2
Left Drawer Side
L.
Quantity
of 2
Right Drawer Side
M.
Quantity
of 2
Drawer Back
N.
Quantity
of 2
Drawer Bottom
O.
Quantity
of 1
Upper Back Panel
Wyndmere Shoe Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded surface
like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing. Before
beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures. Using the
incorrect hardware will cause damage.
Page 2

P
Quantity
of 1
Lower Back Panel
1
Quantity
of 20
Cam-Bolt
2
Quantity
of 20
Cam-Lock
3
Quantity
of 20
PVC Cover
4.
Quantity
of 28
Wood Dowel
Dia 8 x 30mm
5.
Quantity
of 18
Round Head Screw
Dia 1/8” x 1/2”
6.
Quantity
of 8
Bolt
Dia 3/16” x 1/2”
7.
Quantity
of 1
Allen Wrench
8.
Quantity
of 2
Knob
9.
Quantity
of 2
Bolt Dia 5/32” x 21mm
10.
Quantity
of 4
Bolt Dia 1/4” x 1”
11.
Quantity
of 4
Flat Washer Dia 1/4”
12
Quantity
of 4
Spring Washer Dia 1/4”
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish.Avoid rubbing or scratching the
surface with rough or abrasive objects.
Call customer service at 1-800-633-5096
for assistance, questions, or parts.
Assembly Tool Required No.2 Phi
Assembly Tool Required No.2 Phillips
Screwdriver (Not included)
Page 3

Figure 1
Slide Upper Fixed Shelf Panel (F)
into Middle Vertical Panel (B) as
shown.
Figure 2
Insert Wood Dowels (4) into
corresponding holes in Upper
Fixed Shelf Panel (F) to connect
Vertical Panels (C).
Wyndmere Shoe Bench
Assembly Instructions
F
B
C
CB
C
C
F
4
4
4
4
4
Page 4

Figure 3
Slide Lower Fixed Shelf Panel (D)
into Vertical Panels (C) as shown.
Figure 4
Screw with finger to help align cam
bolts before using screwdriver.
Insert Cam Locks (2) into
predrilled holes on top and bottom
of Middle Vertical Panel (B).
Insert Wood Dowels (4) into
corresponding holes on Vertical
Panels (C) and Middle Vertical
Panel (B).
Screw Cam Bolts (1) into
corresponding holes on Top Panel
(A) and Bottom Panel (E).
Attach Top Panel (A) to Middle
Vertical Panel (B) by inserting
Cam Bolts (1) and Wood Dowels
(4) into corresponding holes until
panels meet. Tighten by rotating
Cam Locks (2) clockwise with
Allen Wrench (7).
Attach Bottom Panel (E) to
Vertical Panels (C) and Middle
Vertical Panel (B) by inserting
Cam Bolts (1) and Wood Dowels
(4) into corresponding holes until
panels meet. Tighten by rotating
Cam Locks (2) clockwise with
Allen Wrench (7).
Cover Cam Locks (2) with PVC
Covers (3).
D
F
P
age 5
E
C
C
B
1
1
4
2
3
2
1
4
4
4
4
1
4
4
4

Figure 5
Insert Cam Locks (2) into
corresponding holes on
assembled unit from Figure 4.
Screw Cam Bolts (1) and insert
Wood Dowels (4) into
corresponding holes on Left
Frame (G) and Right Frame (H).
Attach Left Frame (G) and Right
Frame (H) to assembled unit
from Figure 4 by inserting Cam
Bolts (1) and Wood Dowels (4)
into corresponding holes until
Left Frame (G) and assembled
unit from Figure 4 meet. Tighten
by rotating Cam Locks (2)
clockwise with Allen Wrench (7).
Cover Cam Lock (2) holes with
PVC Cover (3)
Attach Middle Leg (I) to Bottom
Panel (E) by hand.
Figure 6
Screw with fingers to help align
bolts before using screwdriver.
Secure attached Top Panel (A)
to Side Frames with Bolts (10),
Spring Washers (12) and Flat
Washers (11).
Tighten Bolts withAllen Wrench
(7).
Page 6
E
I
D
F
A
1
1
4
23
23
1
4
4
23
1
1
4
4
1
G
H
A
7
10
12
11
1112
10
7

Figure 7
Attach Back Panels (O & P) to
assembled unit with Round Head
Screws (5).
Tighten Round Head Screws (5) with
Phillips screwdriver.
Figure 8
Attach Right Drawer Side
(L)
and Left
Drawer Side (K) to Drawer Back (M)
with Bolts (6). Tighten Bolts (6) with
Philips screwdriver.
Slide Drawer Bottom (N) into grooves
of Right Drawer Side (L), Left Drawer
Side (K) and Drawer Back (M).
Insert Cam Locks (2) into
corresponding holes on Left Drawer
Side (K) and Right Drawer Side (L).
Screw Cam Bolts (1) into
corresponding holes on Drawer Front
(J).
Attach Drawer Front (J) to Left
Drawer Side (K) and Right Drawer
Side (L) until panels meet. Tighten by
rotating Cam Locks (2) clockwise
with Phillips screwdriver.
Cover Cam Locks (2) with PVC
Covers (3).
Attach Knob (8) to Drawer Front (J)
with Bolt (9). Tighten Bolt (9) with
Phillips screwdriver .
Repeat steps to assemble
second drawer.
P
O
5
5
5
5
5
5
Page 7

Figure 9
Insert drawers into assembled
unit.
Please make sure drawers
glide smoothly with slides
attached to unit.
Figure 1
Your Wyndmere Shoe Bench is
ready for use.
Page 8

Please immediately examine this product carefully. Any request for missing parts or damage replacement must
be received within 90 days of your receipt of the product. Replacement, if available, will be honored within this
time frame.Parts will not be available for items arriving fully assembled. We do not recommend modifying
product(s) and we are not responsible for any damages due to product modification(s). If damages or missing
parts are not reported within 90 days of your receipt, we are under no obligation to provide parts or replacement
merchandise.
For product issues, please contact Southern Enterprises at 800-633-5096 (toll-free) / 972-869-0111 (Dallas)
Mon-Fri 9am – 4pm CST, or email us at [email protected]. Please ask for customer service representative for
issues involving damages or replacement parts. Please ask for technical assistance representative for any
issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalo
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
[e-mail]
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019