Mocka Southport Rattan Decor Stand User manual

Southport Rattan Décor Stand
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Maximum Weight: 5kgs
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
left leg
x1
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
B
right leg
x1
C
table
x1
D
screw
x2
E
nut
x2

12
Southport Rattan Décor Stand
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide legs [A] and [B] together as shown. Attach legs [A] and [B] together as shown and secure with 2 x screws
(D) and 2 x nuts (E). Tighten with a screwdriver.
A
B
A
B

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Place table [C] between legs [A] and [B] as shown. Once assembled lift furniture into place, do not drag. Ensure unit is
balanced and steady before use. You’re done, enjoy!
Southport Rattan Décor Stand
4
A
B
C