sparklike Laser Portable 2.0 User manual

Table of Contents
1. Unpack
2. Initial Setup
3. Overview of
the ready-to-use device
Sparklike
Laser Portable 2.0™
Sparklike technology since 2000
SETUP GUIDE
Thank you for choosing Sparklike Laser
Portable 2.0™ to measure the gas
concentrations on your insulating glass
products. Sparklike Laser Portable™ is a
unique product for non-destructive analysis,
that measures even through coatings.
Sparklike Laser Portable™ measures oxygen
and the results can be converted to argon,
krypton or additional insulating gas levels.
The equipment consists of 3 parts: a trolley
case with the main unit, measuring head and
display.
Before operating the equipment, register your
device at our website sparklike.com/register.
Follow the Setup Guide carefully before using
the device.

Standard items in a pallet box
1. The trolley with the main
unit
2. Measuring head
3. Touch screen 10.1” display
with a pen and display
holder
4. Packing foams (keep
these to be used in future
shipments)
1.
2. 3.
4.
Accessories and spare parts
5. Power cord
6. Calibration accuracy

7. 
instructions
Spare parts box
8. 
9. Connector for the gas hose
10. Pin clips x 2
11. E-clips x 2
12. Fuses x 2
5.  7.
8. 9. 10. 11. 12.
Optional items
13. Sparklike barcode reader
and a rack
14. Protective cover
13. 14.
1. UNPACK

2. INITIAL SETUP
1. Place the measuring
head to the holder at
the top of the device.
Remember to lock the
measuring head in
place with the locking
knob.
2. Attach the display
to the main unit and
tighten the screw.
3. Connect the HDMI and
the power cable to the
display.
4. Connect the battery
from the switch inside
the case.
5. Connect the provided
power cord to the main
unit and the other end
to the mains power
outlet.
6. Turn the device on
from the power switch
button on the side of
the case.
7. Register your device at
sparklike.com/register
to receive an activation
code to your email.
8. 
the activation code is
entered as a password
for the device. Use the
On-Screen Keyboard
provided by Windows.
Go to sparklike.com/
guidance/lp for more
detailed registration
instructions.
9. To start using the device
see the Instruction
Manual at sparklike.
com/guidance/lp.


4. 5.

1.
2.
3.
7.
Scan the QR-code for further
instructions and support
sparklike.com/guidance/lp
CONTACT YOUR LOCAL
DISTRIBUTOR:
www.sparklike.com/

CONTACT US:
[e-mail]
Sparklike Oy
Hermannin rantatie 12 A 21
00580 HELSINKI
1. Power switch
2. USB port
3. Flushing gas inlet
4–6. Start button on the
measuring head
7. Power cord outlet