Speco HTINT70T User manual

INSTRUCTION
MANUAL
HD-TVI Camera
,QWHQVLÀHU76HULHV
4QFDP5FDIOPMPHJFTJTDPOTUBOUMZEFWFMPQJOHQSPEVDUJNQSPWFNFOUT
8FSFTFSWFUIFSJHIUUPNPEJGZQSPEVDUEFTJHOBOETQFDJGJDBUJPOTXJUIPVUOPUJDFBOEXJUIPVUJODVSSJOHBOZPCMJHBUJPO 3FW
HTINT70T, HTINT701T
(Bullet Camera)
HTINT601T
(Turret Camera)
HTINT591T
(Dome Camera)
HT7246T / HT7250T
(Dome Camera)

Contents
1
Ł
Contents......................................................1
Ł
Precautions.................................................2, 3
Ł
Safety Instructions ......................................4
Ł
Package Contents.......................................5
Ł
Camera Installation.....................................6-12
Ł
Lens Adjustment .........................................13
Ł
6SHFL¿FDWLRQV..............................................13-17
Ł
Camera Dimension.....................................18-19
Ł
Features......................................................20
Ł
OSD Menu Details......................................21-36
Ł
Trouble Shooting.........................................37

2
Precautions
Do not install the camera in
extreme temperature conditions. Do not touch the front lens of the camera.
Never keep the camera pointed
directly at strong light. Do not expose the camera to radioactivity.
Do not install the camera under
unstable lighting conditions.
Do not drop the camera or subject
it to physical shocks.
Only use the camera under conditions
where temperatures are between
-10°C and +50°C. Be especially careful to
provide ventilation when operating under
high temperatures.
This is one of the most important parts of
the camera. Be careful not to leave
fingerprints on the lens cover.
It can cause malfunctions to occur. If exposed to radioactivity the CCD
will fail.
Severe lighting change or flicker can
cause the camera to work improperly.
Housing damage can compromise
weatherproof ratings.
NOTE
* If the camera is exposed to spotlight or object reflecting strong light,
smear or blooming may occur.
* please check that the power satisfies the normal specification before
connecting the camera.

3
CA
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER(OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ISO14001
The lightning flash with an arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
their own expense.
WARNING - Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate the equipment.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION : To prevent electric shock and risk of fire hazards:
ō Do NOT use power sources other than those specified.
WARNING - To prevent electric shock and risk of fire hazards:
୛Do NOT use power sources other than that specified.
୛Do NOT expose this appliance to rain or moisture.
In USA and Canada, Use Class 2 Power Supply Only

4
Safety Instructions
1SFDBVUJPOTGPSVTF
1MFBTFIBOEMFUIJTDBNFSBDBSFGVMMZ
Ł7KLVFDPHUDVKRXOGEHLQVWDOOHGE\TXDOL¿HGSHUVRQQHORQO\
ŁThere are no user serviceable parts inside
ŁDo not disassemble this camera other than to make initial adjustments
ŁUse a UL approved regulated 24 volt AC or 12 volt DC power supply
Ł
8VHDSSURSULDWHORZYROWDJHSRZHUFDEOHWRSUHYHQW¿UHRUHOHFWULFDOVKRFN
Ł
Please insure that your installation area can support the weight of the camera
ŁDo not use a strong or abrasive detergent when cleaning the camera
ŁDo not install near cooling or heating device

5
Package Contents
Please make sure that the following items are included in the Package:
1) HTINT70T, HTINT701T
q8KFGQ6GUV%QPPGEVQT2QYGT,CEM
q(QEWU#FLWUVOGPV*6+066
q$TCEMGV$CUG
q9TGPEJ
q5GV5ETGY
6CRRKPI5ETGYUZ
*GZCIQP5QEMGV5ETGYU/Z
2) HTINT601T
q8KFGQ6GUV%QPPGEVQT2QYGT,CEM
q9TGPEJGU
q5GV5ETGY
6CRRKPI5ETGYUZ
3) HTINT591T
q8KFGQ6GUV%QPPGEVQT2QYGT,CEM
q%JCOGNGQP%QXGT
q9TGPEJ
q5GV5ETGY
6CRRKPI5ETGYUZ
4) HT7246T, HT7250T
q8KFGQ6GUV%QPPGEVQT2QYGT,CEM
q%JCOGNGQP%QXGT
q9TGPEJ
q5GV5ETGY
6CRRKPI5ETGYUZ
2NCUVKE#PEJQT

6
CAMERA INSTALLATION
jvuulj{Gwv~lyGjhislG
XUG~oluG|zpunGXYG}vs{zGkjGOGG\WWGhPG
YUG~oluG|zpunGY[G}vs{zGhjGO[WG}GhP
ZUGjvuulj{G}pklvGjhislG
T jvuulj{GiujGjhislG{vG{olGiujGqhjrUG
kjGXY}GwGz
wGpGaylk
j GaGORP
ishjraOTP
ylkORP
wGz
hjGY[}

7
CAMERA INSTALLATION
Compatibility
1) HTINT70T, HTINT701T
2) HTINT601T
CVCJBB INTJBS INTCM
CVCJBD
ȥ
Adaptor plate(60PLATE) with rubber

8
CAMERA INSTALLATION
Compatibility
3) HTINT591T
CVCJBD
ȥ
Adaptor plate(59PLATE) with rubber
4) HT7246T, HT7250T
INTWM INTPM CVCJBD DFM

CAMERA INSTALLATION
9
%#76+10The installation instructions in this manualCTGHQTWUGD[SWCNKHKGFUGTXKEG
RGTUQPPGNQPN[6QTGFWEGVJGTKUMQHGNGEVTKEUJQEMFQPQVRGTHQTOCP[UGTXKEKPIQVJGT
than that contained in the operating instructions unless you are qualified to do so.
3AXIS BRACKET
SCREW TS T1, 4X25, TH, SUS, 4EA
SCREW M5X10, HEXAGON SOCKET, SUS, BK, 4EA
WALL
1. HTINT70T, HTINT701T

CAMERA INSTALLATION
10
2. HTINT601T
BALL DOME BASE
BALL DOME BODY
BALL DOME
SCREW TS T1, 4X25, TH, SUS, 3EA

CAMERA INSTALLATION
11
3. HTINT591T
VANDAL DOME BASE
VANDAL DOME BODY
BODY OUTER COVER SPECO
SCREW TS T1, 3.5X20, PH, SUS, 3EA

CAMERA INSTALLATION
12
4. HT7246T, HT7250T
VANDAL DOME BODYASSEMBLY
BODY OUTER COVER
TAPPING SCREW 4X40, 3EA
VANDAL DOME BASE ASSEMBLY
PLASTIC ANCHOR 6x30, 3EA

13
1. HTINT70T
LENS ADJUSTMENT
Focus adjustment
Open the cap
Lock screw
Zoom adjustment

14
Image Sensor
Effective Pixels
Total pixels
Scanning System
S/N Ratio
Resolution
Video Output
Minimum Illumination
LENS
Shutter Speed
OSD
BLC
HSBLC
WDR(Wide Dynamic Range)
ACE
Day&Night
Smart-IR
White Balance
Sense-Up
Motion
Digital Noise Reduction
De-Fog
Brightness
AGC
Privacy
Mirror
Sharpness
Defect
Lens Shading(LSC)
RS-485
COLORBAR
TVI / CVBS OUTPUT
Language
Power
Power Consumption
Operating Temperature
Storage Temperature
Dimension
Weight
1/3" SONY 2Mega Exmor CMOS Sensor Imx222
1984(H) X 1105(V), 2.19M Pixels
2000(H) X 1121(V), 2.24M Pixels
Progressive Scan
More than 50dB
Digital : 1920X1080(1080p@30f / 1080p@25f))"
1280X720(720p@60f / 720p@50f)
1.0Vp-p Composite. 75 Ohms
1.0Vp-p TVI(Transport Video Interface) 75 Ohms
0.001 Lux(Sens-Up X32)
DC Auto Iris Varifocal Lens(2.8mm-12mm) 3.6mm Fixed Board Lens
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
Built-in
O
O
ON / OFF (Low,Middle,High)-(Only For TVI Output)
OFF/LOW/MIDDLE/HIGH
AUTO/COLOR/NIGHTEXTERN0
0~20
AUTO/AWB/AWC-SET/MANUAL
x2 ~ x32
ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
ON(AUTO/MANUAL) / OFF
0 ~ 20, Default : 10
0~20(Level Adjustable), Default : 20
ON / OFF (16 Area)
MIRROR,V-FLIP
0~20
AUTO DETECT
O
O(OPTION)
ON/OFF
NTSC/PAL Selectable
English
DC 12V/AC 24V Dual Voltage Operation
DC 12V : Heater ON-500mA, Heater OFF-300mA
AC 24V : Heater ON-195mA, Heater OFF-130mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
3.94"(W)*3.94"(H)*8.27"(D)
3.09Ibs
HTINT70T / HTINT701T
SPECIFICATIONS
+7,177PP
+7,177PP
ʄ
ʄ
Intensifier T Series
&%#WVQ+TKU8CTKHQECN.GPUOOOO(KZGF$QCTF.GPU

15
Image Sensor
Effective Pixels
Total pixels
Scanning System
S/N Ratio
Resolution
Video Output
Minimum Illumination
LENS
Shutter Speed
OSD
BLC
HSBLC
WDR(Wide Dynamic Range)
ACE
Day&Night
Smart-IR
White Balance
Sense-Up
Motion
Digital Noise Reduction
De-Fog
Brightness
AGC
Privacy
Mirror
Sharpness
Defect
Lens Shading(LSC)
RS-485
COLORBAR
TVI / CVBS OUTPUT
Language
Power
Power Consumption
Operating Temperature
Storage Temperature
Dimension
Weight
1/3" SONY 2Mega Exmor CMOS Sensor Imx222
1984(H) X 1105(V), 2.19M Pixels
2000(H) X 1121(V), 2.24M Pixels
Progressive Scan
More than 50dB
Digital : 1920X1080(1080p@30f / 1080p@25f))"
1280X720(720p@60f / 720p@50f)
1.0Vp-p Composite. 75 Ohms
1.0Vp-p TVI(Transport Video Interface) 75 Ohms
0.001 Lux(Sens-Up X32)
3.6mm Fixed Board Lens
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
Built-in
O
O
ON / OFF (Low,Middle,High)-(Only Fot TVI Output)
OFF/LOW/MIDDLE/HIGH
AUTO/COLOR/NIGHTEXTERN0
0~20
AUTO/AWB/AWC-SET/MANUAL
x2 ~ x32
ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
ON(AUTO/MANUAL) / OFF
0 ~ 20, Default : 10
0~20(Level Adjustable), Default : 20
ON / OFF (16 Area)
MIRROR,V-FLIP
0~20
AUTO DETECT
O
O(OPTION)
ON/OFF
NTSC/PAL Selectable
English
DC 12V/AC 24V Dual Voltage Operation
DC 12V : Heater ON-500mA, Heater OFF-300mA
AC 24V : Heater ON-195mA, Heater OFF-130mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
4.65"(Dia)*3.80(H)
1.99Ibs
HTINT601T
SPECIFICATIONS
ʄ
Intensifier T Series
OO(KZGF$QCTF.GPU
+7,177PP

16
Image Sensor
Effective Pixels
Total pixels
Scanning System
S/N Ratio
Resolution
Video Output
Minimum Illumination
LENS
Shutter Speed
OSD
BLC
HSBLC
WDR(Wide Dynamic Range)
ACE
Day&Night
Smart-IR
White Balance
Sense-Up
Motion
Digital Noise Reduction
De-Fog
Brightness
AGC
Privacy
Mirror
Sharpness
Defect
Lens Shading(LSC)
RS-485
COLORBAR
TVI / CVBS OUTPUT
Language
Power
Power Consumption
Operating Temperature
Storage Temperature
Dimension
Weight
1/3" SONY 2Mega Exmor CMOS Sensor Imx222
1984(H) X 1105(V), 2.19M Pixels
2000(H) X 1121(V), 2.24M Pixels
Progressive Scan
More than 50dB
Digital : 1920X1080(1080p@30f / 1080p@25f))"
1280X720(720p@60f / 720p@50f)
1.0Vp-p Composite. 75 Ohms
1.0Vp-p TVI(Transport Video Interface) 75 Ohms
0.001 Lux(Sens-Up X32)
3.6mm Fixed Board Lens
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
Built-in
O
O
ON / OFF (Low,Middle,High)-(Only Fot TVI Output)
OFF/LOW/MIDDLE/HIGH
AUTO/COLOR/NIGHTEXTERN0
0~20
AUTO/AWB/AWC-SET/MANUAL
x2 ~ x32
ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
ON(AUTO/MANUAL) / OFF
0 ~ 20, Default : 10
0~20(Level Adjustable), Default : 20
ON / OFF (16 Area)
MIRROR,V-FLIP
0~20
AUTO DETECT
O
O(OPTION)
ON/OFF
NTSC/PAL Selectable
English
DC 12V/AC 24V Dual Voltage Operation
DC 12V : Heater ON-500mA, Heater OFF-300mA
AC 24V : Heater ON-195mA, Heater OFF-130mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
4.72"(Dia)*3.35"(H)
2.20 Ibs
HTINT591T
SPECIFICATIONS
ʄ
Intensifier T Series
OO(KZGF$QCTF.GPU
+7,177PP

17
Image Sensor
Effective Pixels
Total pixels
Scanning System
S/N Ratio
Resolution
Video Output
Minimum Illumination
LENS
Shutter Speed
OSD
BLC
HSBLC
WDR(Wide Dynamic Range)
ACE
Day&Night
Smart-IR
White Balance
Sense-Up
Motion
Digital Noise Reduction
De-Fog
Brightness
AGC
Privacy
Mirror
Sharpness
Defect
Lens Shading(LSC)
RS-485
COLORBAR
TVI / CVBS OUTPUT
Language
Power
Power Consumption
Operating Temperature
Storage Temperature
Dimension
Weight
1/3" SONY 2Mega Exmor CMOS Sensor Imx222
1984(H) X 1105(V), 2.19M Pixels
2000(H) X 1121(V), 2.24M Pixels
Progressive Scan
More than 50dB
Digital : 1920X1080(1080p@30f / 1080p@25f))"
1280X720(720p@60f / 720p@50f)
1.0Vp-p Composite. 75 Ohms
1.0Vp-p TVI(Transport Video Interface) 75 Ohms
0.001 Lux(Sens-Up X32)
DC Auto Iris Varifocal Lens 2.8-12mm / DC Auto Iris Varifocal Lens(5-50mm)
AUTO / Manual(1/30,1/25Sec ~ 1/30000Sec) / FLICKER
Built-in
O
O
ON / OFF (Low,Middle,High)-(Only For TVI Output)
OFF/LOW/MIDDLE/HIGH
AUTO/COLOR/NIGHTEXTERN0
0~20
AUTO/AWB/AWC-SET/MANUAL
x2 ~ x32
ON / OFF (4 Area)
3DNR (OFF/LOW/MIDDLE/HIGH)
ON(AUTO/MANUAL) / OFF
0 ~ 20, Default : 10
0~20(Level Adjustable), Default : 20
ON / OFF (16 Area)
MIRROR,V-FLIP
0~20
AUTO DETECT
O
O(OPTION)
ON/OFF
NTSC/PAL Selectable
English
DC 12V/AC 24V Dual Voltage Operation
DC 12V : Heater ON-500mA, Heater OFF-300mA
AC 24V : Heater ON-195mA, Heater OFF-130mA
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
-4ºF ~ +140ºF(Humidity : 20%RH ~ 95%RH)
5.10"(Dia)*3.46"(H)
1.0 Ibs
HT7246T / HT7250T
SPECIFICATIONS
ʄ
ʄ
Intensifier T Series
&%#WVQ+TKU8CTKHQECN.GPUOOOO
+77PP
+77PP

18
CAMERA DIMENSION
1) HTINT70T, HTINT701T
3.94” dia
3.38”
8.27”
4.80”
2.95”
3.01” 3.46”
2) HTINT601T
4.65” dia
3.80”
2.66”
3.01”

19
CAMERA DIMENSION
3) HTINT591T
4) HT7246T, HT7250T
4.72” dia
3.35”
1.82”
3.23” dia
1.16”
5.10” dia
5.10” dia
3.93” dia
3.46”