SpectraLink KIRK 1500 Installation instructions

Product End-of-Life Disassembly Instructions
1
Disassembly Instructions Form Doc # | Polycom, Inc.
This document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic
instructions for the disassembly of Spectralink products to remove components and materials requiring
selective treatment, as defined by EU Directive 2002/96/EC Waste Electrical and Electronic Equipment
(WEEE)
Product Name : KIRK Wireless Server 1500
Items Requiring Selective Treatment
The following components should be disposed of or recovered separately from other recyclable items, in compliance
with Article 4 of EU council Directive 75/442/EEC
Enter the quantity of items below contained within the product in the right column, as applicable.
Item Description
Notes
Quantity in
product
Printed Circuit Boards or Printed
Circuit Assemblies
With surface greater than 10 sq cm
between1and
15
Batteries
All types including standard alkaline and
lithium coin or button style batteries
1 lithium se
fig. 3
Mercury Containing components
For example, mercury lamps, display
backlights, scanner lamps, switches,
batteries
no
Liquid Crystal Displays (LCD) with a
surface greater than 100 sq cm
Includes background illuminated displays
with gas discharge lamps
no
Cathode Ray Tubes
no
Electrolytic capacitors / condensers
measuring greater than 2.5 cm diameter or
height
2 in the power
supply se fig 4
(External) electrical cables and
cords
Gas Discharge lamps
no
Plastics containing brominated
flame retardants weighing >26g
Does not include PCBs or PCAs
no
Components and parts containing
toner and ink
no
Parts and materials containing
refractory ceramic fibers
no
Tools required to disassemble the product where components and materials in table above can be
removed.
Tool Description
Tools Size (if
Applicable)
Phillips Screwdriver
Tx 9 and PZ 1

Product End-of-Life Disassembly Instructions
2
Disassembly Instructions Form Doc # | Polycom, Inc.
Disassembly Instructions
The main points to consider when disassembling this product/assembly are:
1. Remove 10 screws from the covver and separate the bottom and the cover 6 from the back
plate and 4 from the side
3. Remove the PCB from the bottom..
4.Remove the power supply
5 Remove the battery.For location see fig.3
6. Remove Electrolytic capacitors. For location see fig 4
7.. Dispose separately the battry, and the PCB and Electrolytic capacitors
Remove 6 screws
from the back plate
Remove 4 screw from both
side whit screwdriver TX 9
FIg. 1

Product End-of-Life Disassembly Instructions
3
Disassembly Instructions Form Doc # | Polycom, Inc.
Remove all the PCB
Remove the
powersupply whit
screw driver PZ 1
Remove the
battery
FIg. 2
FIg. 3

Product End-of-Life Disassembly Instructions
4
Disassembly Instructions Form Doc # | Polycom, Inc.
Remove the battery
Remove 4 screw ,2
on each side of the
powersupply ,using
screw driver PZ 1
Remove two
Electrolytic
capacitors
FIg. 4