Spirit Commercial CIC850 User manual

CIC850 FITNESS BIKE
OWNER’S MANUAL

Spirit Fitness

3
www.spirittness.com
TABLE OF CONTENTS
5 PRODUCT REGISTRATION
6 IMPORTANT SAFETY INSTRUCTIONS
7 IMPORTANT OPERATION INSTRUCTIONS
9 CIC850 ASSEMBLY INSTRUCTIONS
23 CONSOLE INSTRUCTIONS
30 CONNECTING TO APPS
33 GENERAL MAINTENANCE
34 TROUBLESHOOTING
35 MANUFACTURER’S LIMITED WARRANTY
38 EXPLODED DRAWING
39 PARTS LIST
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.

4
Spirit Fitness
Congratulations on your new Indoor Cycle and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality group indoor cycle from Spirit Fitness. Your new
indoor cycle was manufactured by one of the leading tness manufacturers in the world and
is backed by one of the most comprehensive warranties available. Through your dealer, Spirit
Fitness will do all we can to make your ownership experience as pleasant as possible for
many years to come. If not purchased direct from Spirit Fitness, the local dealership where
you purchased this indoor cycle is your administrator for all Spirit Fitness warranty and service
needs. Their responsibility is to provide you with the technical knowledge and service personnel
to make your experience more informed and any difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate your
support and we will always remember that you are the reason that we are in business.
Yours in Health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________

5
www.spirittness.com
RECORD YOUR SERIAL NUMBER
Please record the serial number of this tness product in the space provided below.
Serial Number:
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to Spirit Fitness. You can
also go to http://www.spirittness.com/warranty under the Support tab to register online.

6
Spirit Fitness
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
• Use this equipment only for its intended use as
described in this manual. Do not attempt to ride this
bike at high pedal speeds until you have ridden the
bike for some time and are comfortable riding at slower
pedal speeds.
• The bike is NOT equipped with a freewheel system
which means that when the ywheel is in motion, the
pedals will be in motion. Do not attempt to stop the unit
by applying backward pressure to pedals while they
are turning as knee injury may occur. Do not attempt to
remove your feet from pedals while they are moving.
• Wait for ywheel to coast to a stop before dismounting
the bike. If you want to stop the ywheel, push down on
the resistance/brake knob.
• Serious injury or death may occur from over-training.
Consult a medical doctor or qualied tness instructor
to determine an exercise program appropriate for your
level of tness.
• Do not attempt to turn the pedal cranks by hand. Do
not touch any driving mechanism while it is in motion as
possible injury could occur.
• In a home setting, keep children away from the bike
when it is not in use. Keep children and pets away
from the unit while it is in use.
• Do not attempt to perform dip movements on
handlebars.
• Never drop or insert any object into any opening of
the bike.
• Only use the bike on a stable, level oor.
• Follow instructions for safe use of the equipment
including proper seat position, handlebar position,
and use of foot positioning system of pedals. Do not
attempt to pull up handlebar post and seat post over
the ‘MAX.’ level
• For safe operation, allow for at least 1foot (30cm) of
free space to either side of the unit and 2 feet (60cm)
of free space to the rear of the unit.
• Regularly examine the bike for damage and
wear. Inoperable components should be replaced
immediately or the equipment should not be used until
it is repaired.
• This appliance is not intended for use by persons with
reduced physical, sensory or metal capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
• Keep children under the age of 13 away from
this machine.

7
www.spirittness.com
• Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and
possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT OPERATION
INSTRUCTIONS
NEVER expose the bike to rain or moisture. This product is NOT designed for use outdoors, near a pool
or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees
Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).
WARNING
This product can expose you to chemicals including Toluene and Acrylamide which are known to the State
of California to cause Cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov

8
Spirit Fitness

9
www.spirittness.com
CIC850 PRE-ASSEMBLY
UNPACKING
1. Cut the straps, then along the dotted line on the bottom of the box;
lift the box over the unit and unpack.
2. Locate the hardware package. The hardware is separated into six
steps. Remove the tools rst. Remove the hardware for each step as
needed to avoid confusion. The numbers in the instructions that are in
parenthesis (#) are the item number from the assembly drawing
for reference.
TOOLS INCLUDED:
4mm Allen Wrench A
5mm Allen Wrench B
13/17mm Combination Wrench C
M22 Wrench D
PARTS INCLUDED:
1 Main Frame
1 Front Stabilizer
1 Rear Stabilizer
1 Adjustment Handlebar Knob
1Water Bottle Holder
1 Handlebar Post
1 Handlebar
2 Foot Pedals
1 Hardware Kit
1 Tablet Holder
1 Dumbbell Holder
1 Console Bracket

10
Spirit Fitness
CIC850 STEP ONE
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
109
3
106
111
103
103
37 35
137
103
104
D
37
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
65 SCREW M8 X 1.25 X 55L 2
5 FLAT WASHER M8 2
1. Gather HARDWARE FOR STEP 1.
2. Position the FRONT STABILIZER (3) on the
FRAME BRACKET as shown in the gure.
Make sure the TRANSPORT WHEELS are
facing up and toward the front of the bike.
3. Attach the STABILIZER with 2 HEX SCREWS
(65) and 2 FLAT WASHERS (5). Do not
overtighten as deformation of the stabilizer
may occur.
4. Make sure the LEVELING FEET with nut are
fully screwed into the STABILIZER.

11
www.spirittness.com
CIC850 STEP TWO
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
109
3
106
111
103
103
37 35
137
103
104
D
37
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
65 SCREW M8 X 1.25 X 55L 2
5 FLAT WASHER M8 2
1. Gather HARDWARE FOR STEP 2.
2. Position the REAR STABILIZER (10) on the
FRAME BRACKET as shown in the gure.
3. Attach the STABILIZER with 2 HEX SCREWS
(65) and 2 FLAT WASHERS (5). Do not
overtighten as deformation of the stabilizer
may occur.

12
Spirit Fitness
CIC850 STEP THREE
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
109
3
106
111
103
103
37 35
137
103
104
D
37
1. Remove the STAR-POP PIN (104) from the
components box and turn clockwise to tight-
en rmly into the FRAME with WRENCH
(D).
2. Insert the HANDLEBAR POST (37) into the
FRAME TUBE and tighten rmly with the
STAR-POP PIN.
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
104 KNOB STAR POP-PIN 1

13
www.spirittness.com
CIC850 STEP FOUR
1. Remove the pre-installed SCREW
(137) from the back of the console.
This screw will be used to secure
the console to the console bracket
later on.
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
137 PHILIPS HEAD SCREW M5*15L 1
137
110

14
Spirit Fitness
CIC850 STEP FIVE
HARDWARE FOR STEP
PART TYPE DESCRIPTION QTY
110
109
137
30
105
106
103
111
1
1
1
1
1
1
2
2
CONSOLE
CONSOLE BRACKET
SCREW
HANDLEBAR
WATER BOTTLE HOLDER
TABLET HOLDER
SCREW
FLAT WASHERS
DT-3268F
/
M5*15L
/
BLACK
BLACK
M6*P1.0*20L
M6(D16*d6.5*1.0t)
1. Remove the battery cover from the back of the
CONSOLE (110). Insert 2 AAA batteries into the
battery compartment and reinstall the battery cover.
When battery working voltage is low, the “low bat-
tery” indicator will show up on the Console display.
2. Place the CONSOLE BRACKET (109) on the
back of the console and secure it using 1 SCREW
(137) from the console box. Tighten with the Wrench (C).
3. Position the CONSOLE BRACKET (109) on the HANDLEBAR (30) making sure to align the screw holes with
ne screw holes of the Handlebar. Align the screw holes of the WATER BOTTLE HOLDER (105) with the TABLET
HOLDER (106) and the Handlebar. Secure using 2 SCREWS (103) and 2 FLAT WASHERS (111) and tighten
with the L-hex Wrench (A).
4. Pull out the SAFETY PIN(35) and slide the HANDLEBAR onto the POST (37).
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
3
106
111
111
103
103
37 35
104
D
37
109
137
5

15
www.spirittness.com
CIC850 STEP SIX
HARDWARE FOR STEP
PART TYPE DESCRIPTION QTY
35
37
1
1
SAFETY PIN
HANDLEBAR POST
/
/
27
28
113
114
6
6
1
1
Flat cross head screw
Spring Washer
Left dumbbell Holder
Right dumbbell Holder
M5*P0.8*8L
SW5*1.0t
/
/
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
109
3
106
111
103
103
37 35
137
103
104
D
37
1. Remove the 3 SCREWS (27) with 3
SPRING WASHERS (28) from the seat
slider assembly. Attach the LEFT DUMB-
BELL HOLDER (113) to the seat slider
and secure with 3 SCREWS (27) and 3
SPRING WASHER (28) by the Wrench
(C) tighten.
2. Repeat for the RIGHT DUMBBELL HOLD-
ER (114).
6

16
Spirit Fitness
CIC850 STEP SEVEN
1. Remove pedals from the components box.
2. Look at the end of the pedal axle and notice
each pedal is marked with an R and L on
the spindle. It is indicated which side of bike
the pedal is intended to assemble.
3. Apply some grease to the threads if needed.
Locate the pedal marked “R” on the spindle
on the right side of crank (chain guard side).
Turn clockwise and tighten with the wrench
rmly.
4. Apply some grease to the threads if needed.
Locate the pedal marked “L” on the spindle
on the left side of the crank. Turn counter-
clockwise and tighten with the wrench rmly.
Left pedal assembly Right pedal assembly
3
5
65
65
B
5
5
65
10
65
5
B
28
27
27
28
113
114
28
27
27
28 27
28
27
28
CC
135/L
136/R
A C
110
109
3
106
111
103
103
37 35
137
103
104
D
37
HARDWARE FOR STEP 7
PART TYPE DESCRIPTION QTY
136L/R PEDAL 2

17
www.spirittness.com
CIC850 STEP EIGHT
HARDWARE FOR STEP 8
PART TYPE DESCRIPTION QTY
119 SCREW 1
119
118
118
119 110
1. Loosen the SCREW (119) using the Wrench (C).
Remove the LEFT CHAIN GUARD B (118).
2. Remove the old battery on the sensor board and
insert the new battery. Replace the LEFT CHAIN
GUARD B (118) and secure with the SCREW.

18
Spirit Fitness
HANDLE BAR ADJUSTMENT
HANDLEBAR HEIGHT ADJUSTMENT
1. The handlebar height is a matter of preference. Start with a handlebar height that is the same
as the seat’s height. Adjusting the handlebar higher will give the rider a more upright posi-
tion; lower will result in a more crouched position.
2. Raise or lower the handlebar by loosening the knob on the handlebar post and adjust by
sliding the handlebar mount up or down as desired. Then tighten the knob to secure the han-
dlebar post. Note the nal position mark on the handlebar post for future reference.
ADJUSTMENT OF HANDLEBAR’S FORWARD/AFT POSITION
1. Loosen the knob under the handlebar and slide the handlebar forward or backward as desired. A suitable forward/aft
position should allow the rider to comfortably grasp the handlebar with a slight bend at the elbow.
2. Tighten the knob to secure the handlebar assembly.

19
www.spirittness.com
RESISTANCE ADJUSTMENT
Resistance can be adjusted easily at any time while riding to change the intensity of
workout. Turn the knob clockwise (+) to increase resistance. Turn the knob counterclockwise
(-) to decrease resistance.
EMERGENCY BRAKE
In case of emergency or before dismounting the indoor cycle, presses directly DOWN on
the resistance knob to stop the ywheel and pedal.
PEDAL STRAP ADJUSTMENT
Place the ball of you feet in the toe clip till the front of the shoe is snugly in the cage. Then
tighten the strap of toe clip around your shoe by pulling up on the strap until cage of toe
clip ts snugly around the shoe.

20
Spirit Fitness
ADJUSTING THE PEDAL STRAPS
Place your feet in between the aluminum surface of the pedal and the nylon foot strap that wraps
around it. To adjust the t, pull the end of the adjustable strap down to tighten, or pull the strap up to
loosen.
USING THE SPD CLIP-IN PEDALS
Engage the clip-in pedals by placing clip-in between bindings while pushing down. Disengage by
twisting heel outwards away from exercise bike. Binding tension is adjustable and should be set so
that clip-in and shoe do not disengage when pedaling. Use an Allen key to turn tension adjusting
screws, clockwise to increase binding tension, counterclockwise to decrease binding tension.
Regular
Side View
(for use with
athletic shoes)
SPD Clip-in View