Spirit Commercial CIC850 User manual

CIC850 FITNESS BIKE
OWNER’S MANUAL

Spirit Fitness

TABLE OF CONTENTS
5 PRODUCT REGISTRATION
6 IMPORTANT SAFETY INSTRUCTIONS
7 IMPORTANT OPERATION INSTRUCTIONS
9 CIC850 ASSEMBLY INSTRUCTIONS
30
24
GENERAL MAINTENANCE
31 MANUFACTURER’S LIMITED WARRANTY
34
35
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.
3
17 CONSOLE INSTRUCTIONS
TROUBLESHOOTING
EXPLODED DRAWING
PARTS LIST
www.spiritfitness.ca

4
Spirit Fitness
Congratulations on your new Indoor Cycle and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality group indoor cycle from Spirit Fitness. Your new
is backed by one of the most comprehensive warranties available. Through your dealer, Spirit
Fitness will do all we can to make your ownership experience as pleasant as possible for
many years to come. If not purchased direct from Spirit Fitness, the local dealership where
you purchased this indoor cycle is your administrator for all Spirit Fitness warranty and service
needs. Their responsibility is to provide you with the technical knowledge and service personnel
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate your
support and we will always remember that you are the reason that we are in business.
Yours in Health,
Spirit Fitness NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________

5
RECORD YOUR SERIAL NUMBER
product in the space provided
below.
Serial Number:
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and
returned to Spirit Fitness. You can also go to www.spiritfitness.ca/warranty under the
Support tab to register online.
Serial Number Location
www.spiritfitness.ca

6
Spirit Fitness
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
•Use this equipment only for its intended use as
described in this manual. Do not attempt to ride this
bike at high pedal speeds until you have ridden the
bike for some time and are comfortable riding at slower
pedal speeds.
•The bike is NOT equipped with a freewheel system
pedals will be in motion. Do not attempt to stop the unit
by applying backward pressure to pedals while they
are turning as knee injury may occur. Do not attempt to
remove your feet from pedals while they are moving.
•
the resistance/brake knob.
•Serious injury or death may occur from over-training.
to determine an exercise program appropriate for your
•Do not attempt to turn the pedal cranks by hand. Do
not touch any driving mechanism while it is in motion as
possible injury could occur.
•In a home setting, keep children away from the bike
when it is not in use. Keep children and pets away
from the unit while it is in use.
•Do not attempt to perform dip movements on
handlebars.
•Never drop or insert any object into any opening of
the bike.
•
• Follow instructions for safe use of the equipment
including proper seat position, handlebar position,
and use of foot positioning system of pedals. Do not
attempt to pull up handlebar post and seat post over
the ‘MAX.’ level
•For safe operation, allow for at least 1foot (30cm) of
free space to either side of the unit and 2 feet (60cm)
of free space to the rear of the unit.
•Regularly examine the bike for damage and
wear. Inoperable components should be replaced
immediately or the equipment should not be used until
it is repaired.
•This appliance is not intended for use by persons with
reduced physical, sensory or metal capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
•Keep children under the age of 13 away from
this machine.

7
•Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and
possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT OPERATION
INSTRUCTIONS
NEVER expose the bike to rain or moisture. This product is NOT designed for use outdoors, near a pool
or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees
Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).
WARNING
This product can expose you to chemicals including Toluene and Acrylamide which are known to the State
of California to cause Cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov
www.spiritfitness.ca

8
Spirit Fitness

9
CIC850 PRE-ASSEMBLY
www.spiritfitness.ca

10
Spirit Fitness
CIC850 STEP ONE
65
5
3

11
65
5
10
10
65 5
www.spiritfitness.ca

12
Spirit Fitness
CIC850 STEP THREE
104
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
104 1KNOB STAR-POP-PIN
(104)

13
CIC850 STEP FOUR
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
110
109
137
30
105
106
103
111
1
1
1
1
1
1
2
2
CONSOLE
CONSOLE BRACKET
SCREW
HANDLEBAR
WATER BOTTLE HOLDER
TABLET HOLDER
SCREW
FLAT WASHERS
DT-3268F
/
M5*15L
/
BLACK
BLACK
M6*P1.0*20L
M6(D16*d6.5*1.0t)
110
137
109
105
106
111
103
30
110
109
105
103
106
111
137
109 30
109
www.spiritfitness.ca

14
Spirit Fitness
CIC850 STEP FIVE
104
37
HARDWARE FOR STEP 5
PART TYPE DESCRIPTION QTY
104
37
1
1
SAFETY PIN
HANDLEBAR POST
/
/
37
104

15
CIC850 STEP SIX
R
L
1. Remove pedals from the components box.
2. Look at the end of the pedal axle and notice each
pedal is marked with an R and L on the spindle.
It is indicated which side of bike the pedal is
intended to assemble.
3. Locate the pedal marking R on the spindle on
the right side of crank (Chain guard side). Turn
grease to the threads before engaging to the
crank.
4. Locate the pedal marked L on the spindle on the
Left side of the crank. Turn counter-clockwise to
the threads before engaging to the crank.
HARDWARE FOR STEP 6
PART TYPE DESCRIPTION QTY
136R/L 1PEDAL JD-304
www.spiritfitness.ca

16
Spirit Fitness
CONSOLE INSTALLATION:
1. Ensure the Console Clamp is securely mounted on the back of the console. Insert the mounting
screw through the Console Clamp into the Console.
2. Place the CONSOLE BRACKET on the back of the console and secure using the 1 SCREW . Tighten with
Combination Cross Wrench (C).
3. Position the CONSOLE BRACKET on the Handlebar,making sure to align the screw holes with the screw
holes of the Handlebar. Align the screw holes of WATER BOTTLE HOLDER with TABLET HOLDER and the
CONSOLE BRACKET and the Handlebar. Secure using 2 SCREWS and 2 FLAT WASHERS and tighten
with L-hex Wrench (A).
TRANSMITTER
Depending on the make and model of the bike, the
Speed Sensor Transmitter can typically be installed
nearby the drive belt cover. The transmission range is
around 2 meters from the Speed Sensor Transmitter to
the computer console.
MAGNET
Firmly attach the magnet on the crank arm at the
measured location. The allowable maximum distance
between the magnet and sensor end is 8mm.

17
CIC850 CONSOLE OPERATION
www.spiritfitness.ca

18
Spirit Fitness
DISPLAY WINDOW
TIME
CADENCE & S
Cadence is the
rotating in RPM
can also be disp
In addition to th
display a bar gr
the approximate
Average Caden
after the rider st
DISTANCE
Distance is the
distance achiev
the user riding a
the bikes flywhe
KCAL
Kcal is the appr
work out. The c
rider’s instantan
HEART RATE (apply to HR featured models only)
This is the appr
chest belt durin
RPM
HEART RATE
TIME
DISTANCE
KCAL
LOW BETTERY
SPEED
BPM

19
1. Remove the battery cover from the back of the computer.
2. Insert 2 AAA batteries into the battery compartment and reinstall the battery cover.
3. When battery voltage is low, the ‘Low battery’ indicator will show up on the Console display.
SPEED SENSOR TRANSMITTER BATTERY INSTALLATION
1. Remove the battery cover from the transmitter.
2. Install 2 AAA batteries in the battery compartment and reinstall the
battery cover.
INSTALLATION OF THE UNIVERSAL GROUP CYCLING MONITOR
This UNIVERSAL SPINNER BIKE MONITOR can be installed onto most of
group cycling and spin style bike handlebars.
CONSOLE BATTERY INSTALLATION:
www.spiritfitness.ca

20
Spirit Fitness
In Power Saving Mode”, pressing Page key will bring the console to “Quick Start” active state.
MODE SELECT
Press MODE key to select the DIST, KCAL display.
RESETTING ALL MEASURED VALUES
To clear all the measured values, press and hold key under the TIME Mode for 3 seconds. All the
measured value for AVG SPEED, AVG PULSE, TIME, DIST, KCAL will reset to zero.
TIMER SETTING
The TIMER displays users’ exercise-workout time. If the user does not set the COUNT DOWN TIME,
the TIME will count up from 00:00 to 99:59. If the user has set a COUNT DOWN TIME prior to
and an alarm will sound. The timer will then start counting up from 00:01. The user can go into TIM-
ER setting from SPEED or DISTANCE Mode by press and hold ‘SET’ key for 3 seconds.