Spirit Commercial CIC850 User manual

CIC850 FITNESS BIKE
OWNER’S MANUAL

Spirit Fitness

3
www.spirittness.com
TABLE OF CONTENTS
5 PRODUCT REGISTRATION
6 IMPORTANT SAFETY INSTRUCTIONS
7 IMPORTANT OPERATION INSTRUCTIONS
9 CIC850 ASSEMBLY INSTRUCTIONS
30 GENERAL MAINTENANCE
31 MANUFACTURER’S LIMITED WARRANTY
Thank you for purchasing our product, please save these instructions. Please do not perform or attempt any
customizing, adjustments, repair or maintenance that is not described in this manual.

4
Spirit Fitness
Congratulations on your new Indoor Cycle and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality group indoor cycle from Spirit Fitness. Your new
indoor cycle was manufactured by one of the leading tness manufacturers in the world and
is backed by one of the most comprehensive warranties available. Through your dealer, Spirit
Fitness will do all we can to make your ownership experience as pleasant as possible for
many years to come. If not purchased direct from Spirit Fitness, the local dealership where
you purchased this indoor cycle is your administrator for all Spirit Fitness warranty and service
needs. Their responsibility is to provide you with the technical knowledge and service personnel
to make your experience more informed and any difculties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy. We appreciate your
support and we will always remember that you are the reason that we are in business.
Yours in Health,
Spirit Fitness
NAME OF DEALER _____________________________________
DEALER PHONE # _____________________________________
PURCHASE DATE _____________________________________

5
www.spirittness.com
RECORD YOUR SERIAL NUMBER
Please record the serial number of this tness product in the space provided
below.
Serial Number:
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and
returned to Spirit Fitness. You can also go to https://www.spirittness.com/
residentialwarrantyregistration.html under the Support tab to register online.
Serial Number Location

6
Spirit Fitness
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
• Use this equipment only for its intended use as
described in this manual. Do not attempt to ride this
bike at high pedal speeds until you have ridden the
bike for some time and are comfortable riding at slower
pedal speeds.
• The bike is NOT equipped with a freewheel system
which means that when the ywheel is in motion, the
pedals will be in motion. Do not attempt to stop the unit
by applying backward pressure to pedals while they
are turning as knee injury may occur. Do not attempt to
remove your feet from pedals while they are moving.
• Wait for ywheel to coast to a stop before dismounting
the bike. If you want to stop the ywheel, push down on
the resistance/brake knob.
• Serious injury or death may occur from over-training.
Consult a medical doctor or qualied tness instructor
to determine an exercise program appropriate for your
level of tness.
• Do not attempt to turn the pedal cranks by hand. Do
not touch any driving mechanism while it is in motion as
possible injury could occur.
• In a home setting, keep children away from the bike
when it is not in use. Keep children and pets away
from the unit while it is in use.
• Do not attempt to perform dip movements on
handlebars.
• Never drop or insert any object into any opening of
the bike.
• Only use the bike on a stable, level oor.
• Follow instructions for safe use of the equipment
including proper seat position, handlebar position,
and use of foot positioning system of pedals. Do not
attempt to pull up handlebar post and seat post over
the ‘MAX.’ level
• For safe operation, allow for at least 1foot (30cm) of
free space to either side of the unit and 2 feet (60cm)
of free space to the rear of the unit.
• Regularly examine the bike for damage and
wear. Inoperable components should be replaced
immediately or the equipment should not be used until
it is repaired.
• This appliance is not intended for use by persons with
reduced physical, sensory or metal capabilities, or
lack of experience and knowledge, unless they have
been given supervision or instruction concerning use of
the appliance by a person responsible for their safety.
• Keep children under the age of 13 away from
this machine.

7
www.spirittness.com
• Failure to follow all guidelines may compromise the effectiveness of the exercise experience, expose yourself (and
possibly others) to injury, and reduce the longevity
of the equipment.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
IMPORTANT OPERATION
INSTRUCTIONS
NEVER expose the bike to rain or moisture. This product is NOT designed for use outdoors, near a pool
or spa, or in any other high humidity environment. Maximum environmental ratings are 40-120 degrees
Fahrenheit, 95% humidity non-condensing (no water droplets forming on surfaces).
WARNING
This product can expose you to chemicals including Toluene and Acrylamide which are known to the State
of California to cause Cancer and birth defects or other reproductive harm. For more information, go to
www.P65Warnings.ca.gov

8
Spirit Fitness
SEAT
SEAT FORWARD/AFT ADJ.
SEAT HEIGHT ADJ.
MAIN FRAME
LEVELERS
REAR STABILIZER
TRANSPORT WHEELS
FLYWHEEL
PEDALS
FRONT STABILIZER
RESISTANCE ADJUSTMENT
HANDLEBAR ADJUSTMENT
HANDLEBAR FORWARD/AFT ADJ.

9
www.spirittness.com
CIC850 PRE-ASSEMBLY
UNPACKING
1. Cut the straps, then along the dotted line on the bottom of the box;
lift the box over the unit and unpack.
2. Locate the hardware package. The hardware is separated into six
steps. Remove the tools rst. Remove the hardware for each step as
needed to avoid confusion. The numbers in the instructions that are in
parenthesis (#) are the item number from the assembly drawing
for reference.
TOOLS INCLUDED:
4mm Allen Wrench A
5mm Allen Wrench B
13/17mm Combination Wrench C
M22 Wrench D
PARTS INCLUDED:
1 Main Frame
1 Front Stabilizer
1 Rear Stabilizer
1 Adjustment Handlebar Knob
1Water Bottle Holder
1 Handlebar Post
1 Handlebar
2 Foot Pedals
1 Hardware Kit
1 Tablet Holder
1 Dumbbell Holder
1 Console Bracket

10
Spirit Fitness
CIC850 STEP ONE
1
3
4
5
4
HARDWARE FOR STEP 1
PART TYPE DESCRIPTION QTY
3 SCREW M5X1.25X55L 2
4 FLAT WASHER M8 4
1. Gather HARDWARE FOR STEP 1.
2. Position the FRONT STABILIZER (1) on
the FRAME BRACKET as shown in the
gure. Make sure the TRANSPORT
WHEELS are facing up and toward the
front of the bike.
3. Attach the STABILIZER with 2 HEX
SCREWS (3) and 4 FLAT WASHERS
(4). Do not over tightened as the
deformation of stabilizer may occur.
4. Make sure the LEVELING FEET with nut
are fully screwed into the STABILIZER

11
www.spirittness.com
CIC850 STEP TWO
2
3
4
4
5
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
3 SCREW M8X1.25X55L 2
4 FLAT WASHER M8 4
1. Gather HARDWARE FOR STEP 2.
2. Position the REAR STABILIZER (2) on
the FRAME BRACKET as shown in the
gure.
3. Attach the STABILIZER with 2 HEX
SCREWS (3) and 4 FLAT WASHERS
(4). Do not over tightened as the
deformation of stabilizer may occur.

12
Spirit Fitness
CIC850 STEP THREE
11
13
12
NO HARDWARE FOR STEP 3
1. Remove the L-POP PIN from the components
box and turn clockwise to tighten rmly into the
FRAME with the WRENCH (D).

13
www.spirittness.com
1. Gather HARDWARE FOR STEP 4.
2. Remove the battery cover from the back
of the CONSOLE (6). Insert 2 AA batteries
into the battery compartment and reinstall
the battery cover. When the Battery working
voltage is low, the “Low battery” indicator will
show up on the Console display.
3. Place the CONSOLE BRACKET (7) on
the back of the console and secure using the
1SCREW (8). Tighten with COMBINATION
CROSS WRENCH (C).
4. Position the Console Bracket (7) on the
Handlebar (9), making sure to align the screw
holes with the screw holes of the Handlebar.
Align the screw holes of the WATER BOTTLE
HOLDER (10) with the TABLET HOLDER (11), and the CONSOLE BRACKET (7) and the Handlebar.
Secure with 2 SCREWS (12) and 2 FLAT WASHERS (13). Tighten using the L-HEX WRENCH (A).
CIC850 STEP FOUR
1
2
HARDWARE FOR STEP 4
PART TYPE DESCRIPTION QTY
12 SCREW M6X1.0”X15L 2
13 FLAT WASHER M6 2

14
Spirit Fitness
CIC850 STEP FIVE
6
6
NO HARDWARE FOR STEP 5
1. Pull out the SAFETY PIN (14) and slide the
HANDLEBAR onto the POST (15).
2. Insert the HANDLEBAR ASSEMBLY into the FRAME
TUBE and tighten rmly with the L-POP PIN.

15
www.spirittness.com
CIC850 STEP SIX
6
6
NO HARDWARE FOR STEP 5
1. Remove pedals from the components box.
2. Look at the end of the pedal axle and notice each
pedal is marked with an R and L on the spindle.
It is indicated which side of bike the pedal is
intended to assemble.
3. Located the pedal marking R on the spindle on
the right side of crank (Chain guard side). Turn
clockwise to tighten rmly. If possible, apply some
grease to the threads before engaging to the
crank.
4. Locate the pedal marked L on the spindle on the
Left side of the crank. Turn counter-clockwise to
tighten rmly. If possible, apply some grease to
the threads before engaging to the crank.

16
Spirit Fitness
CONSOLE INSTALLATION:
1. Ensure the Console Clamp is securely mounted on the back of the console. Insert the mounting
screw through the Console Clamp into the Console.
2. Place the CONSOLE BRACKET on the back of the console and secure using the 1 SCREW . Tighten with
Combination Cross Wrench (C).
3. Position the CONSOLE BRACKET on the Handlebar,making sure to align the screw holes with the screw
holes of the Handlebar. Align the screw holes of WATER BOTTLE HOLDER with TABLET HOLDER and the
CONSOLE BRACKET and the Handlebar. Secure using 2 SCREWS and 2 FLAT WASHERS and tighten
with L-hex Wrench (A).
TRANSMITTER
Depending on the make and model of the bike, the
Speed Sensor Transmitter can typically be installed
nearby the drive belt cover. The transmission range is
around 2 meters from the Speed Sensor Transmitter to
the computer console.
MAGNET
Firmly attach the magnet on the crank arm at the
measured location. The allowable maximum distance
between the magnet and sensor end is 8mm.

17
www.spirittness.com
CT800 CONSOLE OPERATION

18
Spirit Fitness

19
www.spirittness.com
1. Remove the battery cover from the back of the computer.
2. Insert 2 AAA batteries into the battery compartment and reinstall the battery cover.
3. When battery voltage is low, the ‘Low battery’ indicator will show up on the Console display.
SPEED SENSOR TRANSMITTER BATTERY INSTALLATION
1. Remove the battery cover from the transmitter.
2. Install 2 AAA batteries in the battery compartment and reinstall the battery cover.
INSTALLATION OF THE UNIVERSAL GROUP CYCLING MONITOR
This UNIVERSAL SPINNER BIKE MONITOR can be installed onto most of group cycling and spin style
bike handlebars.
CONSOLE BATTERY INSTALLATION:

20
Spirit Fitness
In Power Saving Mode”, pressing Page key will bring the console to “Quick Start” active state.
MODE SELECT
Press MODE key to select the DIST, KCAL display.
RESETTING ALL MEASURED VALUE
To clear all the measured values, press and hold key under the TIME Mode for 3 seconds. All the
measured value for AVG SPEED, AVG PULSE, TIME, DIST, KCAL will reset to zero.
TIMER SETTING
The TIMER displays users’ exercise-workout time. If the user does not set the COUNT DOWN TIME,
the TIME will count up from 00:00 to 99:59. I“If the user has set a COUNT DOWN TIME prior to
the workout, the TIME will count down to zero. Once the user has reached zero, the display will ash
and an alarm will sound. The timer will then start counting up from 00:01. The user can go into TIM-
ER setting from SPEED or DISTANCE Mode by press and hold ‘SET’ key for 3 seconds.