Spirit XE850-A27 User manual

Caution read and understand this manual before operating unit.

1
SAFETY HINTS
WARNING - Read all instructions before using this appliance.
■Do not operate elliptical on deeply padded, plush or shag carpet. Damage to both
carpet and elliptical may result.
■Keep children away from the elliptical. There are obvious pinch points and other
caution areas that can cause harm.
■ Keep hands away from all moving parts.
■ Never operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.
■ Keep the cord away from heated surfaces.
■Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous environment.
■ Never drop or insert any object into any openings.
■ Do not use outdoors.
■To disconnect, turn all controls to the off position, then remove the plug from the outlet.
■Do not attempt to use your elliptical for any purpose other than for the purpose it is
intended.
■The pulse sensors are not medical devices. Various factors, including the user’s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
■Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
CAUTION!! Please be careful when opening this unit.
XE850-A27_0705A

2
Fan
Console
Handpulse
Handle Bar
Beverage Holder
Console Mast
Console Mast Cover
Front
Stabilizer
Cover
Connecting Arm
Pedal Arm
Rear Shroud
Cushion (Foot Pad)
Pedal

3
ASSEMBLY
PACK
CHECK
LIST
#84 M5 x 12m/m
Phillips Head Screw (2pcs)
#75.3/8” x 2-1/4”
Hex Head Screw (2pcs)
#77. 3/8” x 3-3/4”
Hex Head Screw (4pcs)
#96.3/8" x 19 x 1.5T
Flat Washer (2pcs) #104.3/8" x 23 x 2.0T
Curved Washer (4pcs)
Step 2
#84 M5 x 12m/m
Phillips Head Screw (4pcs)
#104.3/8" x 23 x 2.0T
Curved Washer (2pcs)
#128.3/8" x 2T
Spring Washer (1pc)
#76. 3/8” x 3/4”
Button Head Socket Screw (2pcs)
#75.3/8” x 2-1/4”
Hex Head Screw (1pc)
ASSEMBLY PACK CHECK LIST
Step 1

4
ASSEMBLY
PACK
CHECK
LIST
Step 4
#102.ψ25 Wavy
Washer (2 pcs) #131.3/8" x 35 x 2.0T
Flat Washer (2 pcs)
#79. 5/16” x 1-1/4”
Hex Head Screw (2 pcs)
#107. 3.5 x 12m/m
Self Tapping Screw (2 pcs)
#100.5/16" x 18 x 1.5T
Flat Washer (2 pcs)
#91. 5/16" x 7T
Nyloc Nut (2 pcs)
#84. M5 x 12m/m
Phillips Head Screw (26 pcs)
ASSEMBLY PACK CHECK LIST
Step 3
#80. 5/16” x 3/4”
Hex Head Screw (4 pcs)
#76. 3/8” x 3/4”
Button Head Socket Screw (2pcs)

5
ASSEMBLY
PACK
CHECK
LIST
#126. Phillips Screw Driver (1 pc) #125. Combination M6 Allen Wrench
& Phillips Head Screw Driver (1 pc)
#129. 12m/m Wrench (1 pcs) #124. 13/14m/m Wrench (1 pc)
ASSEMBLY PACK CHECK LIST
Tools
#33. Bolt Cap (2 pcs)

6
ASSEMBLY
DRAWING
Step 1

7
ASSEMBLY
DRAWING
Step 2

8
ASSEMBLY
DRAWING
Step 3

9
ASSEMBLY
DRAWING
Step 4