Sport-thieme 126 8704 Manual

Operating/assembly instructions
Storage trolley for gymnastics equipment
Prod. code: 126 8704
Page 1 of 3 02/2016
38367 Grasleben / Germany
Telephone: [phone]
www.sport-thieme.com
Operating instructions: storage trolley for gymnastics equipment
Thank you very much for choosing a product. We want to make sure
that you can enjoy this product, so here is some important advice for your safety as
well as for the use and maintenance of the equipment. Please read these
instructions fully before you assemble and use the equipment.
Pos. Description
1 2 x side section
2 2 x shelf
3 1 x base plate
4 1 x back cover
5 2 x side attachment
6 2 x back attachment
7 1 x lower end strip
8 4 x castor
9 16 x woodscrew 5 x 16
10 41 x sleeve nut M6 x12
11 1 x Hex key
Included:

Operating/assembly instructions
Storage trolley for gymnastics equipment
Prod. code: 126 8704
Page 2 of 3 07/2013
5
111
2. Assembly instructions
2.1 Place one side section on the floor.
2.2 Insert both shelves and the back cover with the attached hanger bolts into the pre-drilled
holes.
2.3 Place the other side section on top and fix using the sleeve nuts.
2.4 Turn the entire structure around so that the other side section can be fixed.
2.5 Rotate the storage trolley so that the underside faces upwards.
2.6 Using the woodscrews, screw the castors to the base plate though the holes present.
2.7 Place the base plate with castors onto the storage trolley and fix using the sleeve nuts.
2.8 Screw the lower end strip from the base plate.
2.9 Screw the side and rear attachments.
6
4
2
5
7
3
1
8

Operating/assembly instructions
Storage trolley for gymnastics equipment
Prod. code: 126 8704
Page 3 of 3 02/2016
Caution: Do not overload or climb the equipment!
Maintenance and care instructions
We are happy to answer any questions you may have.
Your Sport-Thieme Team
Instructions:
Carry out a visual check at regular intervals. Due to our
continuous quality control of the products, technical changes
may occur which may lead to slight deviations in the instructions.
Check at regular intervals that the screw connections are tight.
Check the equipment for possible damage and replace worn-out
parts. Check the condition of wooden elements as chipping and
other signs of wear can result from use. Ensure that moveable
parts are free-moving.