SportsArt Fitness SENZA E874-13 User manual

E874 - 13’’ OWNER’S MANUAL CONTENTS
DISCLAIMER ....................................................................................... 3
1. INTRODUCTION ............................................................................. 5
2. SAFETY PRECAUTIONS ................................................................ 6
3. WARNING LABEL POSITION ......................................................... 10
4. LIST OF PARTS ............................................................................. 11
5. ASSEMBLE THE PRODUCT .......................................................... 14
STEP 1 Install the Main Frame ....................................................... 14
STEP 2 Install the Console ............................................................. 17
STEP 3 Install the Outer link pedal arm covers ................................ 18
STEP 4 Install the Front base cover................................................. 19
STEP 5 Install the Pedals ................................................................ 20
STEP 6 Precautions When Installing the Pedals ............................. 21
STEP 7 Move the Elliptical Trainer in Place .................................... 22
STEP 8 Level the Product ............................................................... 23
STEP 9 Power Cord Installation Instructions ................................... 24
STEP 10 TV and Network Function ................................................. 25
STEP 11 Beware of Moving Parts ................................................... 26
STEP 12 Essential Functions Guide ............................................... 27
STEP 13 MAINTENANCE Circuit Breaker ...................................... 28
6. UNDERSTAND THE SENZA CONSOLE ....................................... 29
DISPLAY Overview ......................................................................... 29
DISPLAY Console Panel ................................................................. 29
DISPLAY Specications .................................................................. 30
DISPLAY Button Function ............................................................... 30
7. OPERATE THE PRODUCT ............................................................ 31
OPERATION Safe Operating Area ................................................. 31
OPERATION Safely Get On/O󰀨 ...................................................... 32
OPERATION Proper Workout Position ............................................ 33
OPERATION Start Screen .............................................................. 34
OPERATION GO mode .................................................................. 35
OPERATION Workout Selection ..................................................... 36
OPERATION Workout Status .......................................................... 38
OPERATION Select Entertainment ................................................. 40
OPERATION View Entertainment ................................................... 41
OPERATION Workout Summary ..................................................... 41
OPERATION COOL DOWN ............................................................ 42
OPERATION Idle Mode .................................................................. 42
OPERATION Energy Smart Function .............................................. 42
OPERATION Precautions ............................................................... 42
OPERATION SA WELL+ ................................................................. 43

E874 - 13’’ OWNER’S MANUAL CONTENTS
8. ABOUT HEART RATE DETECTION .............................................. 44
HEART RATE Telemetry ................................................................ 44
HEART RATE Contact ................................................................... 44
9. GUIDELINES FOR EXERCISE ...................................................... 45
10. MAINTENANCE ........................................................................... 46
MAINTENANCE Safety Precautions ............................................... 46
MAINTENANCE Error Messages .................................................... 47
MAINTENANCE Lubrication ............................................................ 47
MAINTENANCE Lubrication Procedure .......................................... 48
MAINTENANCE Cleaning the Glide Rails ....................................... 49
MAINTENANCE Schedule .............................................................. 50
11. ACCESSORIES ........................................................................... 51
ACCESSORIES Standard .............................................................. 51
ACCESSORIES Option .................................................................. 52
12. APPENDIXES ............................................................................. 53
APPENDIXES Specications .......................................................... 53
APPENDIXES Wiring Diagram ....................................................... 54
APPENDIXES Exploded Diagrams.................................................. 55
APPENDIXES Disassembly ........................................................... 56

3
DISCLAIMER
The information in this user manual is subject to change without prior notice.
Sports Art Industrial Co., Ltd. makes no representation or warranty of any
kind, express or implied, regarding the marketability of this manual, the
suitability for a special purpose, or any other matters.
SportsArt Industrial Co., Ltd. accepts no responsibility for any errors in this
manual, or any damages incurred directly, indirectly, accidently, or continually
from the modication, display, or other use of this manual.
A. Internet function:
A1. This machine provides only a web page browsing method for web page
and video browsing.
A2. For web page videos, we support only Youku and YouTube.
Note: Some videos may not be viewed due to restrictions resulting from
country policies, internal server rewalls, or video formats, etc.
A3. Strongly recommend good browsing environment when using the
internet, used wired network and the network bandwidth must be above
10Mbps.
B. IPTV:
1. Supports subnetwork streaming only, no external streaming.
2. Support wired network only, no wi network.
3. This function is Open IPTV, unable to read any encrypted stream
signals.
4. Supports HTTP and RTSP streaming only.
C. Standard USB audios and videos:
1. Not all USB ash drives can be read properly.
2. Not all audio and video formats can be played correctly.
D. Bluetooth functions:
D1. Bluetooth Music (AVRCP V1.5)
Due to the many varieties of, and rapid changes in, mobile phone models,
failure of a mobile phone to connect indicates that we currently do not
support that phone.
D2. Bluetooth BLE 4.0 Heart Rate Strap
We only support POLAR-compliant Bluetooth BLE 4.0 Heart Rate
Straps.

4
DISCLAIMER (CONT.)
E. TV:
E1. This machine only supports viewing local free TV.
E2. This machine may be a󰀨ected by the local environment, climate,
equipment, etc., which may cause poor quality in reception and
denition.
F. This machine does not support the installation of 3rd party APP.
G. Standard USB charger:
Supports charging of GOOGLE-certied Android mobile phones, and Apple
iPhone, iPad, iPad air, and iPad mini.
H. ANYCast:
ANYCast isn’t available to all the cellphone.

5
1. INTRODUCTION
Congratulations on the purchase of a high quality SportsArt product, the E874-13”
Senza Console Elliptical trainer. Constructed of high quality materials and designed
for years of reliable performance, this product was made for full commercial
use.
Before this product is assembled or operated, we recommend that you familiarize
yourself with this manual. Understanding the correct assembly and operation of
this product will help ensure that exercisers obtain their tness goals safely and
successfully.
2085mm(82”)
1765mm(69.5”)
680mm(26.8”)

6
2. SAFETY PRECAUTIONS
This product was designed and built for optimum safety. However certain
precautions apply during the use of this product. Please note the following
safety precautions:
● To reduce the risk of personal injury, read and understand all the instructions
before using this product.
● Make sure the product is installed and operated as instructed in this
manual. Be careful when mounting and dismounting the unit. The product
shall be disconnected from its power source during service and installed
and when replacing parts.
● Use this product only for the intended use described in this manual.
● Check the product before every use. Make sure all parts are assembled,
and all fasteners are tightened. Do not use the product if it is disassembled
in any way.
● Do not leave your device unattended while in use.
● Assemble and operate the product on a solid, level surface. Do not use
outdoors or near water (including swimming pools and saunas) and should
not be used where aerosol (spray) products or oxygen are used. Do not
operate on a blanket or near ammable materials.
● Keep all air ventilation areas free of blockage. Never drop or insert into
any opening.
● Wear appropriate workout clothes, don’t wear loose clothing, tie all long
hair back, wear shoes with rubber or high traction soles, don’t wear shoes
with leather soles/high heels or barefoot use this product.
● Never place liquids of any type directly on the unit, except in a bottle
holder or accessory tray. Lidded containers are recommended.
● Always use the safety key when operating the product.
● Use the handrails whenever additional stability is required. In case of
emergency, such as tripping, the user should grab the handrails and place
his/her feet on the side platforms. The handrails may be held to enhance
stability as needed, but are not for continuous use.
● Keep away from moving parts. Moving parts may or may not stop
immediately if an object becomes caught or impedes normal motion.
● To Avoid Injury, use extreme caution when stepping onto or o󰀨 of a moving
belt.
● Never operate this product if it has been damaged in any way. If it is
not working properly, if it has been dropped or damaged, or dropped into
water, contact a service technician for repairs.

7
2. SAFETY PRECAUTIONS (CONT.)
● Do not use accessories or parts that are not specically recommended
by the manufacturer (SportsArt). Such parts might cause injuries or cause
the unit to fail and void the warranty. We will not be responsible for any
safety issue that arises due to the misuse of accessories or parts. At the
same time, we will terminate the warranty terms of this equipment.
● Keep all air ventilation areas free of blockage. Never drop or insert any
object into any opening.
● Unpack and verify contents of boxes according to the list of parts to check
if any parts are missing. If the product is damaged or missing, contact your
SportsArt representative to nd out all the materials that were damaged
during shipping. (Note: Transport damage is the responsibility of the
carrier.)
● This product is not intended for use by persons (including children 14
or younger) with reduced physical, sensory, or mental capabilities, or by
people who are otherwise decient in product knowledge or experience.
If such people use this product, they should be given training and be
supervised at all times by someone responsible for their safety.
● CAUTION : The heart rate system is for reference only, if you feel any pain
or any abnormal feeling, please stop Exercise and consult
your doctor immediately.
● Consult your physician before starting a workout or training program. It is
recommended that you undergo a complete physical examination. Have
your doctor review your training and diet programs to advise you of a
workout routine you should adopt.
● WORK within your recommended exercise level. DO NOT work to
exhaustion.
● Before using this equipment to exercise, always do stretching exercises
to properly warm up.
● Always unplug this appliance from the electrical outlet immediately after
using and before cleaning.
● WARNING! Only qualied technicians should be allowed to contact
electrical components such as circuit boards. Some components carry
an electrical charge even after use has been discontinued or the product
has been unplugged. For products with power cords, turn o󰀨 unit power,
wait 10 minutes, then disconnect the power cord from the power socket.
For products without power cords, let the unit sit without use for 10
minutes. Only after taking such precautions should covers be removed
and electrical components be accessed.
● Do not attempt to drag or carry this unit by the power cord. Keep the
power cord away from heated surfaces.
● Do not attempt to modify the plug provided with this product. Proper
power supply must be provided. If the plug does not ft an outlet, contact a
qualied electrician to inspect or modify power in the facility.

8
2. SAFETY PRECAUTIONS (CONT.)
● This product must be grounded. If it should malfunction or breakdown,
Improper grounding can increase the risk of electric shock. The product
is equipped with a power cord having an equipment-grounding conductor
and a grounding plug. The plug must be inserted into an appropriate outlet
that is properly installed and grounded in accordance with all local codes
and ordinances. Check with a qualied electrician if you are in doubt as to
whether the power outlet is properly grounded.
● Noise emission under load is higher than without load.
● This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If the user desires to correct the
interference, it is at the user’s own expense.
● The recommended minimum operating temperature is 15 degree Celsius.
● The user weight limit for this product is 205kg (450lb).
If the product is used in a nominal 120V circuit and the rated current is less
than 15A with a grounding plug, use a plug like the one shown below:
GROUNDED
OUTLED
GROUNDING
PIN
● This product is used in areas with voltage other than 120V. Please use
standard socket type according to di󰀨erent countries (grounding is required),
and should be congured by qualied electric motor professionals.

9
2. SAFETY PRECAUTIONS (CONT.)
MARKINGS
CAUTION:
● Read instruction manual before using.
● Do not let children on or near the product.
WARNING:
● Heart rate monitoring system may be inaccurate.
● Over exercise may result in serious injury or death.
● If you feel faint, stop exercising immediately.
● This stationary training equipment is not suitable for hight accuracy
purposes.

10
3. WARNING LABEL POSITION
If you are in French-speaking areas in North America, display the warning
label on console panel as shown below, or in an obvious location that is
visible to the user.
NOTE: The label is available exclusively in French-speaking areas in
North America.

11
4. LIST OF PARTS
A1
A2
A3
A5 A6
A10
A7
A8
A9
A4
A11
A12
A13
Assembly Parts
No. Name Qty. No. Name Qty.
A1 Main frame 1 A7 Front base cover 1
A2 Stationary handlebar 1 A8 Left support tube 1
A3 Console 1 A9 Right support tube 1
A4 Left/right joint covers 2 A10 Foot pedals 2
A5 Left pedestal cover 1A11 Pedal bottom covers 2
A6 Right pedestal cover 1 A12 Outer link pedal arm
covers 2
A13 Power cord 1

12
4. LIST OF PARTS (CONTINUED)
Hardware Kit
No. Name Qty. Specication Notes
10 Inner hex screw 6 M10*P1.5*L20
Toothed lock washer 6 D20*d10.2*t2.0
11
Secondary roller axle 2 D9.96*L54
Self-lubricating bushing 4
Secondary roller 2
12 Stride adjustment linkage cover 2
13 Hex nut 2 M10*P1.5
Stopper 2 Ø30-30
14 Round shaped screw cap 4
15 Mushroom top philips screw 8 M4*L16
Round shaped screw cap 4
16 Round head Philips screw 2 M5*P0.8*L12
17 Mushroom top philips screw 4 M4*L12
18 Round shaped screw cap 1
L-shaped Allen wrench 1 M4
L-shaped Allen wrench 1 M5
L-shaped Allen wrench 1 M6
L-shaped Allen wrench 1 M8
Outer Hexagon Wrench 1 13*15
Double open-end wrench 1 14*15

13
4. LIST OF PARTS (CONTINUED)
Components on the Product
No. Name Specication Notes
33 Hex socket at head cap screw M10*P1.5*L20
34 Inner hex screw 5/16"*L2-1/4" Half
tooth
Flat washer D20*d8*t2.0
35 Mushroom top inner hex screw M8*P1.25*L15
Flat washer D17*d8.3*t2
36 Inner hex screw M6*P1.0*L15
Handlebar washer D20*d7*t2
37 Mushroom top inner hex screw M6*P1.0*L15
Flat washer D13*d6*t1
38 Mushroom top philips screw M5*P0.8*L12
39
Inner hex screw M6*P1.0*L15
Flat washer D13*d6*t2.0
Toothed lock washer D20*d6.2*t2.0
40 Mushroom top philips screw M5*0.8*L8
41 Mushroom top inner hex screw M5*P0.8*L16
42 Round head phillips screw M4*P0.7*L8

14
5. ASSEMBLE THE PRODUCT
STEP 1 Install the Main Frame
(1) Remove all packaging material and place the main frame on the carton
base.
(2) Lift the console mast into upright position, and then tighten the following
screws in sequence: screw (33) in (area D), screw (10) in (area A), and
screws (10) in (area B,C).
(3) Lift left/right swing arms and pedal arms as shown in the gure below,
and place the pedal carriages on the carton base.
(4) Carefully take out the glide rail (E) from the carton base while the swing
arms and pedal arms are lifted.

15
STEP 1 Install the Main Frame (Cont.)
(5-1) Slip the glide rail into the pedal carriage and lower swing arm, and
then install the secondary roller (11) to the bottom of glide rail.
(NOTE: Insert the axle toward inner side from outer side)
(5-2) Insert the axle shaft into housing on the pedal arm, then tighten
screw (34) to secure the assembly, and put the stride adjustment
linkage cover on. (NOTE: repeat on other side)
(5-3) Secure the stopper (13) to the front side of the glide rail on both
sides.
NOTE: Read and follow all assembly instructions in this manual. Incorrect
assembly may present a danger to the exerciser, damage the
elliptical and void the warranty.
a
b
(2)
(1)
(3)

16
STEP 1 Install the Main Frame (Cont.)
(6-1) Insert left and right support tubes (A8)(A9) into the axle area and
base, and loosely secure them into place with screws (35) (36)
(6-2) Install the stationary handlebar (A2) to the left/right support tube and
using screw (37) to secure the assembly. Once you have nished,
tighten the screws (35)(36) in (area A) and (area B).
(6-3) Remove screw (38) from the side of the left/right support tube (A8)
(A9). Snap joint covers (A4) together and secure them with screws
(38), and then put the round cover on.
(1) (2)
(3)
A4
A4
38
38

17
STEP 2 Install the Console
(1) Remove the following parts from the console(A3): anti-slip pad (51),
screws (52)(53), and bottle holder (54).
(2) Secure the console (A3) to the main frame (A1) with pre-installed screw
(39).
(3) Remove the rear cover (55) and then connect the cables of the main
frame (A1) to the cables of the console (A3). Tuck the cables away in the
console for a cleaner look, and then put back the bottle holder (54) and
secure it with screws (52)(53). After that, put on the anti-slip pad (51)
and the round shaped screw cap (18).
51
52
53
54
39
55
A3
A3
A3
A3
A1
A1
(1) (2)
(3)
51
18
52
53
54

18
STEP 3 Install the Outer link pedal arm covers
(1) Rotate the pedal arm to the position shown in the gure below, then
put on cover B and rotate it 270 degrees clockwise.
(2) Snap cover B and cover C together, and rotate the pedal arm until
(area A) is easily accessed, then tighten screws (16)(17). Repeat on
other side.
A12
A
BB
A
270
17
16
C

19
STEP 4 Install the Front base cover
Secure left/right pedestal cover(A5)(A6) to the main frame using screw
(15), then put on the round shaped screw cap (15) and the front base
cover (17).
NOTE: install the ground wire rst before putting the front base cover on.
A5
15
15
A6
A7