SprayCraft SP3512 User manual
SPRAY BOOTH SP3512
Thanks for purchasing our Spray Booth SP3512. Please read this
Instruction Manual carefully and thoroughly before operating the unit
to get best performance.
INSTRUCTION MANUAL
2
、
1. The spray booth can be folded away and deployed when needed. It is small
in size & lightweight.
2. It has small powerful motor with big air flow. No need for fixed ventilation
pipes & it saves energy and protects the environment.
3. Booth has high density net filter that can filter most of the paint and
moisture.
4. Cable and plug kept inside so it can be drawn out when needed, and retract
the cable automatically by pressing the button.
5. The on/off switch also controls the light so it will turn on the light when
the machine is working.
Switch 1: Motor Working Switch2: Motor Working & Light On
6. The unit has low noise levels around 45 db.
7. It has a revolving turntable, and has a handle on the top making it
convenient to carry.
Voltage, frequency and plug according to different country.
Power: 16W
2. Specification:
1. Features
3
Voltage: 230V-50Hz
Air flow: 3.3 m3/min
Noise level: 45 db.
Extend dimension: 40.5X47.5X33.5 CM
Shrink dimension: 40.5X21.5X29 CM
Net Weight: 5.0KG
3. Spare part list:
4
2. To use the booth pull down the
front cover panel of the unit flat to
the floor.
1. When the product is folded away
above there is the carry handle,
beneath there are four rubber feet.
The booth is easy to carry like this.
3. Pull up the top cover & clip into
the 2 fixing lugs situated the top of
the booth case.
4. The cable & plug can now be seen
inside the hole on the right. It can be
pulled out when in needed. To
automatically retract the cable back
after use press the button (part 1).
4. Operation Instructions:
5
Please read the entire operating instructions before using the products for
the first time; They contain important information about the correct
operation of this booth. The guarantee/warranty will be void if damage is
incurred resulting from non compliance with the operating instructions.
Liability for any and all consequential damage is excluded!
We do not assume any liability for damage to property or personal injury
caused by improper use or the failure to observe the safety instructions! In
such cases the guarantee/warranty will be void.
5. The turntable can be placed on the
bottom cover if required by the user.
6. Extension hose (part 9) can be
connected to the machine behind the
exhaust port. Plug in the power cable
to the socket ready for use.
5. Safety instructions and hazard warnings
6
•The unauthorized conversion, modification of disassembly of the
products is inadmissible because of safety and approval reasons (CE).
•The product is not a toy and must be kept out of the reach of children.
Particular care must therefore be exercised if children are present.
•The product must not get damp or wet, it is only intended for use in dry,
indoor locations (not bathrooms or similarly damp areas). There is a risk of
a fatal electric shock.
•Do not expose the product or its accessories to damp or extremely high
or low temperatures.
•Do not leave packing materials unattended. They may become
dangerous playing material for children.
•Dropping, falling, heavy pressure or tensile forces could destroy or at
least limit the function of the product.
•Never position the device in the vicinity of combustible or easily
inflammable materials, e.g. curtains!
•Always make sure that the rotary table on which the object is placed is
located in the center of the housing!
•The device should continue to be run for approx 2 -6 minutes after each
use which ensures the self-cleaning of the device!
•Always turn the device off and pull out the mains plug when the device
is not in use!
•If the filter is contaminated with substantial amounts of paint, it can no
7
longer work efficiently and must be replaced with a clean filter.
•To prevent health damage, never use poisonous, flammable or explosive
paints or materials!
•Always ensure proper ventilation!
•Do not impair the extraction performance, you may not extend the
extraction pipe!
•In commercial institutions, the accident prevention regulations of the
employer's liability insurance association for electrical systems and
operating facilities are to be observed.
•In schools, training centres, hobby and self-help workshops, the use of
the product must be supervised by trained personnel in a responsible
manner.
•If you have reason to assume that safe operation is no longer possible,
disconnect the device immediately and secure it against inadvertent
operation.
It can be assumed that safe operation is no longer possible if:
- the device shows visible signs of damage.
- the device no longer functions.
- after a longer period of storage under unfavorable conditions or.
- following heavy stress during transportation.
This manual suits for next models
1
