10
Settings
PHOTO SETTINGS
Sets the options of the PHOTO mode.
Delay:
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows you to choose the time interval between each detection before the
camera records the next photo. A longer delay minimizes the number of
photos taken and maximizes the battery life. A shorter delay maximizes
the number of photos taken but requires more battery power. A shor-
ter delay interval is recommended when the camera is used for security
purposes.
Multi-shot:
(1/2/3 consecutive shots)
Takes up to 3 consecutive shots at each detection, with a 5-second
delay between each photo. This option allows the user to get up to 3
photos when the camera is set in PHOTO mode.
TIME LAPSE SETTINGS
Sets the options of the TIME LAPSE mode.
Interval:
(From 3m to 24h)
Allows the camera to take photos at regular preset intervals. For example,
if "5m" is selected in the TIME LAPSE mode, the camera takes a photo
every 5 minutes. This option will disable the detection.
Note: The TIME LAPSE mode only applies for photos, not videos. When
the TIME LAPSE mode is selected, the DELAY option and the MULTI-
SHOT mode are disabled.
VIDEO SETTINGS
Sets the options of the VIDEO mode.
Delay:
(Instant/10s/1m/3m/5m/10m/15m/30m)
Allows the user to choose the time interval between each detection before
the camera records the next video. A longer delay minimizes the number
of videos taken and maximizes the battery life. A shorter delay maximizes
the number of videos taken but requires more battery power. A shor-
ter delay interval is recommended when the camera is used for security
purposes.
Video length:
(10s/30s/60s/90s)
Allows the user to select the duration of the recording when the camera
is set in VIDEO mode.
Recommended settings
The camera can be congured for in trail usage.. This situation usually
presents low activity levels, fast subjects and a small number of photos is
expected. These settings increase the chances of capturing animals that
follow each other.
The camera can also be congured for feeder's site usage.. This situa-
tion usually presents high activity level, slow subjects and a large number
of photos is expected. These settings moderate the number of photos
taken while capturing overall activity on the feeder's site.
Here is a table showing the suggested settings for each situation:
Trail Feeder
Delay Instant 5 min
Multi-shots 1 2-3
When these recommended settings are not adapted to the situation,
battery life can be affected.
Photo rst:
(On/Off)
When this option is enabled, a photo is taken immediately before each
video.
Note: The le name of the photo corresponds to the digit before the vi-
deo le name. For example, if the name of the photo is PICT001.JPG, the
name of the video will be VID001.AVI. The video mode will record videos
on the SD card but will not transfer them to your account. The Photo
rst option will send you the picture taken just before the video starts.
In order to view those videos, you need to retrieve the SD card from the
camera and read it from a computer.
