Stardom SafeTANK GT5640-B31 User manual

1
34
2
󳡳󹜈󱲯󸀌󲙼󵱍󳎕󾙍󱲯󸀌󱨱󲱬󳝶󱲯󱺃󱗴󱒷󶡿󱘎󽙡
GT5640 產品本體 X1( 內含抽取盒 x4)
USB 3.2 C to C 連接線 x1 (for GT5640-BA31 / GT5640-B31))
USB 3.2 C to A 連接線 x1 (for GT5640-BA31 )
電源線 x1
把手 x1 快速安裝導引 x1 螺絲及頂針
High
Low
󵻓󵼟󸕷󱸇󵍙
󵻓󵼟󳤊󱸇󵱍󳣈󳡧
󵻓󵼟󱵐󴓙󳥿󹏘
󶟯󶣗󳥹󶀲󵍙
󹥧󴴰󳥹󶀲󵍙
󵻓󵼟󹥧󴴰󳥿󹏘
󹟶󶍎󹐙󲮠
󹱉󳡙
K
L
󾙕󾙔󾙔󲑬
󹥧󴴰󶪎󹜈󹞐
󹥧󴴰󳫆󳇕
󹱉󳡙󸭛󸴐󱬫󳫘󳥿󹄮
󱩎󱗟󳝶󵥌
󵥄󱽢󶀲󳘍󲍍󷇤󸾇󱘎󷼲
󳥹󶀲󵍙󵍙󷮾󸎢󳻛
󵥄󱽢󱛔󵥌󴪒󳘍󱕥󹭢
󵻓󺁪󲰉󸀌
󱮇󹩌󴄯󳲋󱚝
󹛰󳥿󾙕󶅐󾙍󱵫󱸯󹜈󹞐󲃓󱒪󵻓󵼟
銳銨科技
󾙓
󾙔
󵧈󳕝󹥰󸅳󹞐󹜆󳟾󶆐󹠾GT5640󳟾󴆩󹯅󵻓󵼟󳼩󾙍󱱪󳏳󸳣󸶋󳕝󳡇󳲋󱚝󵯔󱚝󴑧󶟯󶣗󱓩󲒖󷼇󵻓󵼟󲰉󾈵󶆐
󹠾󳎕󾙍󳹂󸵂󷼇󹥧󴴰󹞐󹜆󵯔󱱣󱚝󾙋
󳋼󵅗󳊈󸕓󹠾󱕞󱛔󵥌GT5640󵯔󸝕󳸄󱧗󲮨󱰖󶾩󲙼󾙍󸏤󹃂󲴕󹂧󸅳󸝕󳸄󱢶󱘙󱭞󱸢󱒪󱞶󱧗󲮨󸀌󶱭󱒶󳟾󸶿󶎙
󱢶󱘙󾙍󹤢󹂧󱢶󳬅󳕝󹂧󸅳󵯔󸝕󳸄󾙋󷏖󳕝󱧗󲮨󲍨GT5640 󵯔󸝕󳸄󳬨󴢹󳟾󸸉󲚫󾙍RAIDON󲴌󱒹󸜘󱘕󱚑󵯔
󸜫󱘕󾙋󱢶󳬅󳕝󹂧󸅳󵯔󸝕󳸄󾙋󷏖󳕝󱧗󲮨󲍨GT5640󵯔󸝕󳸄󳬨󴢹󳟾󸸉󲚫󾙍RAIDON󲴌󱒹󸜘󱘕󱚑󵯔󸜫󱘕󾙋
󳘬󸒡󳕝󱛔󵥌󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵯔󵥄󱽢󾙋
󴂸󳡧󱩩󸀖󵯔󸝕󸉜󲍨󱬕󵑙󱮇󹤚󵈨󳂷󶤛󷾩󸌭󶡙󵽎󸍣󾙍󱙺󲳉󹢣󵥄󱽢󸆉󴉓󲴌󳂷󱬕󸜤󳼩󵅂󴴸󽙢󱘕󱚑󵯔󵥄󱽢
󸆉󴉓󳟾󵲉󹞐󸝕󸉜󴁍󳸯󾙍󸏤󳕝󵲃󳩻󱒶 www.RAIDON.com.tw󶥢󶍨󴇉󸌋󾙍󳟾󵲃󳩻󷇤󳕝󵯔󴑧󱱪󶺅󶢺
󶋍󱸟󶺅󶫵󾙍󴂸󱨿󱸻󲴌󱒹󱸢󷼇󸴂󵸔󾙋
󲜿󴅞󳕝󲴕󹉐󹈽󶅎󳢸󵯔󵥄󱽢󴁹󱘕󱚑󵧰󲀷󾙍󳟾󳼎󳗗󵙃󳎣󾍐󳸯󵥄󱽢󸉜󳓽󾙊󱛔󵥌󳡧󱩩󳟾󹫼󺁪󾙍󸏤󳕝󶺅󶢺
[email protected]󾙍󳟹󱟀󲴌󱦦󸴐󲋲󸅻󳕝󾙋
󴂸󸎢󳻛󵲉󹞐󵥄󱽢󱨱󲱬󴠟󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󵑙󴝘󳡇󴁹
󵅂󹉐󹈽󶅎󳢸󶻨󱘙󴁹󹠠󱨿󱸻󳹾󱒷󱽢󵑡󱔐󱒪
󸏤󱷪󵊉󱒷󱬼󴠁󹾘󾙍󲰏󳟸GT5640 󵯔󵻓󺁪󲰉󸀌
󱛔󵥌󶶷󱸯󶤛󵥛󹩌󴄯󸵂󷼇󵻓󵼟󹜈󹞐󳲋󱚝󾙋
󾙓GT5640󹜈󲁑󳎕󾙍󹥧󷁷󶎙󳝶󱸯󸔣󱭐󱭞󲋭󹯅󵘱󶍐󵻓󵼟󾙍󸏤󱜅󵊉󱚝󴑧󶟯󶣗󳥹󶀲󲰏󳟸󴉓󳊬󱳎󳎕󱵫󱸯󴟽󳄜󱛔󵥌󾙋
󾙕󱛔󵥌󸶋󾐍󱓩󾙍󷏖󳿎󱒹󹥰󸅳󱛔󵥌󱭞󴆩󹯅󵻓󵼟󾙍󱸯󸳣󸶋󵲉󲴕󳝶󵯔󵻓󵼟󹥧󴴰󳥿󹏘󹜈󹞐󱛠󹞐󹜆󸌫󵻓󵼟
󹥧󴴰󾙍󱗴󸶟󵲚󹥧󳵿󴅞󾙋󳎕󶬼󷏖󹥰󸅳󱛔󵥌󱭞󸌫󵻓󵼟󳼩󾙍󱒪󴖻󱸧󹥰󸳣󸶋󵲉󲴕󳝶󵯔󵻓󵼟󹥧󴴰󳥿󹏘󹜈󹞐
󱵫󱸯󹜈󲁑󸌫󵻓󵼟󹥧󴴰󾙋
󾙖󱵫󱛔󳂷󲃓󵘱󹞐󹜆󴆩󹯅󵻓󵼟󹥧󴴰󾙍󷏖󸳣󸶋󱮇󶎙󵯔󹥧󴴰󳥿󹏘󹜈󹞐󳟾󳎕󶎙󵯔󹥧󴴰󶪎󹜈󹞐󱛠󹞐󹜆
GT5640󾙍󱭿󱒷󴞂󲁑󱱣󳼩󾙍󲋭󹯅󵻓󵼟󵯔󹥧󴴰󸻪󴁮󳓦󳎿󳟸󹜈󲁑󵔜󳙿󾙋
󸏤󱧾󵽎󸍣󵲉󹞐󸾇󱘎󷇤󵥄󱽢󴂸󸩑󳼎󱹷󴁹󱸉󳬨󳟾󳼎󶰎󲴞󸾇󱘎󾙍󷏖󴁹󱘕󱚑󵧰󲀷󾙍󸏤󷇤󳕝󵯔󶤛
󹉙󲀫󳟾󴑧󱱪󱖶󱾇󶺅󶢺󾙋
󸏤󱮇󳎃󲰨󶥢󱒷󸫝󱛔󵥌󶶷󸎢󳻛󴁕󾙋


󾙗󾙘󾙖󾙒󾙕󾙓󾙗󾙘󾙖󾙒󾙕󾙓󳐯󸴐󲰉󸀌󲴘󳊷
󾙓󾙒󾙔󾙒󾙔󾙔
󲴌󱓻󴘣󶱭󳵳󳹆󳅷󶉚󶉿󹜕󱒶󾙍󱓟󵽎󸍣󳶨󵌥󹱉󳡙󴨐󴁹󷾩󳲈󱚊󾙍󱓇󲋭󱻟󴁹󸷙󵧈󵯔󳶨󵌥󶉿󹜕󾙋󸏤󸸗󱨇󳩻
󸱆󴦃󴴰󳟾󳼎󱩎󱗟󲱬󳻥󸴔󳟸󵥄󱽢󳬨󱣰󵯔󵡌󲖀
󸏤󱛔󵥌󸾇󱘎󱓩󳡇󹠎󵯔󹭝󹃂󳫆󱨭󵻓󵼟󳤊󱸇󵱍󹭝󹃂󲮠󾙍󹜈󲁑󵻓󵼟󳤊󱸇󵱍󳣈󳡧󱜹󲴌󳤊󱸇󵱍󱸇󱬕󾙋
󲰉󸀌󾙕󾙗󱹑󵻓󵼟󾙍󸏤󱛔󵥌󾙘󹯅󹥝󱘎󱲯󱨱󹠎󵯔󲚜󹯅󷷹󶣙󱰗󱗴󲌟󲰬󽙢󲰉󸀌󾙔󾙗󱹑󵻓󵼟󾙍󸏤󱛔󵥌󾙖󹯅󹥝
󱘎󱲯󱨱󹠎󵯔󲴙󹯅󷷹󶣙󱰗󱗴󲌟󲰬󾙋
󵻓󵼟󲰉󸀌󲰏󳟸󳎕󾙍󸏤󲴌󳤊󱸇󵱍󳅷󶆐󳵳󱨭󱓻󴘣󱨱󾙍󱓟󹞐󱒶󳣈󳡧󾙋
󾙓
󾙔
󾙕
󾙖
󾙗
󾙘
󾙙
󲴌󹥧󴴰󶦹󷇤GT5640 󸴠󳩻󾙍󱩬󲴌󹥧󴴰󶦹󷇤󹥧󴴰󳫆󳇕󸴠󳩻󾙋
󸆓󹥰󴦔󸸂󳲃󸾇󱘎󱓩󲴕󳝶󵯔󸴠󳩻󶦹󾙍󱩬󱬩󱭐󳩻󱭞󹥧󷁷󷇤GT5640󵲉󹞐󸴠󳩻󲑬󾙋
󸳣󸶋󱮇󳹂󵯔󸈶󳩿󳥿󹏘󱛠󳲋󱚝󲙼󳩻󵱍󾙋󸏤󱷪󶶴󱮇󹩌󴄯󳲋󱚝
亮恆燈藍1DDH
亮恆燈藍2DDH
亮恆燈藍3DDH
亮恆燈藍4DDH
爍閃燈藍1DDH
爍閃燈藍2DDH
爍閃燈藍3DDH
爍閃燈藍4DDH
硬碟閒置
硬碟格式化
HDD 1 紅燈恆亮
無硬碟
狀態 硬碟 Type C 連接主機
HDD 2 紅燈恆亮
HDD 3 紅燈恆亮
HDD 4 紅燈恆亮
KL

1
3 4
2
High
Low
L
RAIDON is one brand under RAIDON TECHNOLOGY, INC.
Thank you for choosing RAIDON’s product.
The information provided in this manual was checked before publication, but the actual product
specications may have changed before shipping; Latest product specications and updates can be
found at www.RAIDON.com.tw or through your sales representative. No separate notications will be
provided by our company.
If you have any questions about RAIDON products or would like to receive the latest product information,
instruction manuals, or rmware, please contact S[email protected] for assistance.
All product-related content in this manual are copyrighted by RAIDON TECHNOLOGY, INC.
󾙗󾙘󾙖󾙒󾙕󾙓󾙗󾙘󾙖󾙒󾙕󾙓 Quick Installation Guide
Package Contents and Product Views
Front view Rear view
HDD access light
HDD enclosure pin release
HDD enclosure handle
Power status light
System status light
Fan
USB 3.2 Gen 2 Type-C port
Power socket
Anti-theft lock
Main power switch
Fan speed switch
Raidon

When you need to turn off or remove the GT5640 or a certain hard drive, be sure to
perform the safe removal of the hard drive through the operating system you are
operating before turning off the power.
It is highly recommended for users to back up important data contained within the
GT5640 unit on a regular basis or whenever the user feels necessary to a remote or a
separate storage device. Stardom will not be responsible for any lost of data caused
during the use of the unit or the recovery of the data lost.
1.
2.
Open the package and you should nd the following :

󽘀
1.
2.
3.
4.
5.
6.
7.
Place the system on a stable surface. Ensure that it is well ventilated without blockage to
the vent and kept away from areas near water and damage prone areas.
Use the ejector pin included in the accessory kit and inserted into the pin release opening
to eject the removable drive tray latch and extract the removable drive tray.
For 3.5" HDD/SSD, please secure it by use six the larger screws included in the accessory
kit. For 2.5" HDD/SSD, please secure it by use four the smaller screws included in the
accessory kit.
When the hard drive installation has been completed, insert the hard drive tray into the
system horizontally and secure the latch into place.
Connect the power cable to the GT5640, and then plug the power to the wall socket.
Boot-up the unit.
Select the corresponding (USB) cable from an accessory and connect it to the computer
and the GT5640 relevant port respectively.
Using the buttons on the front to turn on /off HDD (please refer to section description of
front panel operation).
Please check the included parts and the product itself for any damage or missing
parts. If you have any questions, please contact the retailer or sales representative.
Please download the user manual from the ofcial website (www.raidon.com.tw)


󾙓󾙒󾙔󾙒󾙔󾙔
HDD Power button
GT5640 product x 1 ( with removable drive tray enclosed x4)
USB 3.2 C to C Cable x 1 (for GT5640-BA31 / GT5640-B31)
USB 3.2 C to A Cable x 1 (for GT5640-BA31) Power Cable x1
Handle x1 Quick Installation Guide x1 Screws & Ejector pins
󾙕󽗿

After the GT5640 is turned on, the computer should be able to recognize the four independent
hard disks. Please follow the operating system's instructions to complete the format process
and then the disks should be ready to used.
If you do not need to use one or more disks temporarily, you can turn the disk off through the
corresponding "hard disk power switch" to save power. And then use the same switch to turn
on the disk if you need to use it.
Even if one or more disks has been individually powered off, if the GT5640 is turned off
through the "power switch" or the "main power switch", next time when GT5640 is turned on
again, the power of the four disks will return to the on state.
1.
2.
3.
Status HDD Type C connect HOST
HDD 1 Red light always on
HDD 2 Red light always on
HDD 3 Red light always on
HDD 4 Red light always on
HDD 1 Blue light always on
HDD 2 Blue light always on
HDD 3 Blue light always on
HDD 4 Blue light always on
HDD 1 Blue light flashing
HDD 2 Blue light flashing
HDD 3 Blue light flashing
HDD 4 Blue light flashing
No HDD
Disk Idle
Disk Format
KL